Skip to the content
2 layers150 × 100 mmMCU motorcycle, the printed circuit board in 3D

Temp storage for PCBs done so far

Size
150 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
82
Pads
230
Tracks, vias
570, 116
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
3 Mar 2025
Updated
3 Mar 2025

Parts

53
QtyValueFootprintReferences
8Conn_01x02_Pin282837-2:TE_282837-2J10, J11, J12, J13, J14, J15, J16, J17
7ASSR-1218footprints:SIP-4_DMOU6, U7, U8, U9, U10, U11, U12
7TestPointTestPoint:TestPoint_Pad_1.5x1.5mmTP1, TP2, TP3, TP4, TP5, TP7, TP8
4470Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R4, R6, R9
3FuseFuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF1, F2, F3
212KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R5
2Conn_01x03_PinConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ1, J18
2Conn_01x08_PinConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ3, J8
2SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW1, SW2
110uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC6
110ufCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC4
1200Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8
122uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC7
122ufCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U13
1AMS1117-5.0Package_TO_SOT_SMD:SOT-223-3_TabPin2U4
1Conn_01x02_PinConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ4
1Conn_01x03_PinConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_HorizontalJ2
1Conn_01x04_PinConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ9
1Conn_01x06_PinConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_HorizontalJ6
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U1
1LED_ARGBKAA-3528RGBS-11:LED_AAA3528LSEKJ3ZGKQBKSD5
1MIKROBUS_HOST_CONNmikroBUS:MIKROBUS_HOST_CONNCON1
1Power LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD4
1ULN2003AULN2003:DIP762W46P254L1969H533Q16U5

More from tcegokul/PCB-designing

2
  • 2 layers80 × 60 mmRemote motorcycle, the printed circuit board in 3D

    Remote motorcycle

    tcegokul/PCB-designing

    Temp storage for PCBs done so far

    37 parts
  • 2 layers50 × 50 mmRFID final version4, the printed circuit board in 3D

    RFID final version4

    tcegokul/PCB-designing

    Temp storage for PCBs done so far

    22 parts

Similar boards

  • 2 layers100 × 100 mmESP32, the printed circuit board in 3D

    ESP32

    Diegoapp55/Proyecto-Sistemas-Embebidos-Smash-Rows

    Repositorio para el proyecto de Sistemas Embebidos 2022-2: Smash Rows

    71 parts1
  • 2 layers260 × 440 mmMultical, the printed circuit board in 3D

    Multical

    Samuelmathe/TFC-Multicanal-Goma

    TFC ULPGL Goma - Systeme IoT multicanal de sous-comptage energetique (ESP32, KiCad, Flutter)

    67 parts
  • 2 layers95 × 55 mmSmarthome v0.1, the printed circuit board in 3D

    Smarthome v0.1

    whysixmift/smarthome_v0.1

    I wanted to control lights and appliances in my room over Wi-Fi without having loose relay modules, breadboards, and 220V AC wires floating around my desk.

    63 parts
  • 2 layers139.7 × 88.9 mmCharge Controller, the printed circuit board in 3D

    Charge Controller

    jharvey/Charge_Controller

    MPPT hardware which uses FUGU firmware

    163 parts24
  • 2 layers80 × 34 mmPCB SAMI V2.0, the printed circuit board in 3D

    PCB SAMI V2.0

    Ezecarp36/Robot-Sumo-Sami

    Proyecto de robot sumo para participar en la LNR 2023

    41 parts2
  • 2 layers99.9 × 99.9 mmMaquina compostaje, the printed circuit board in 3D

    Maquina compostaje

    dani0421/Compostaje

    El SDA se conecta al pin 33 del ESP32 y el SCL al pin 36 de ESP32, cabe resaltar que en la placa no quedaran orificios para la pantalla, unicamente los pines para hacer la conexión.

    103 parts
  • 4 layers82 × 100 mmFalcon Edge, the printed circuit board in 3D

    Falcon Edge

    rmingon/Falcon-Edge

    A 3D-printable flying-wing airframe with a custom ESP32 flight computer—open hardware you can solder, screw together, and fly.

    48 parts11
  • 4 layers60 × 85 mmVehicleVCU PCB, the printed circuit board in 3D

    VehicleVCU PCB

    nsm81/VehicleVCU_PCB

    A Vehicle Control Unit provides multiple CANBUS transceivers for communication within a vehicle.

    64 parts1

Questions

How big is the MCU motorcycle PCB?

It measures 150 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MCU motorcycle use?

53 parts, built around the ESP32-WROOM-32, AMS1117-3.3, AMS1117-5.0 and ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MCU motorcycle KiCad files?

From the tcegokul/PCB-designing repository on GitHub, at the commit this page was made from: the board is MCU_motorcycle/MCU_motorcycle.kicad_pcb and its schematic MCU_motorcycle/MCU_ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MCU motorcycle design in my own project?

Its repository states no licence, so its author keeps all rights: ask tcegokul before reusing the design.