

Multical
TFC ULPGL Goma - Systeme IoT multicanal de sous-comptage energetique (ESP32, KiCad, Flutter)
- Size
- 260 × 440 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 107
- Pads
- 304
- Tracks, vias
- 666, 78
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 18 Jul 2026
- Updated
- 5 Nov 2026
Overview
Multical is an open-source printed circuit board by Samuelmathe, from the Samuelmathe/TFC-Multicanal-Goma repository on GitHub. It is a 2-layer board of 260 × 440 mm with 67 parts on 107 nets, routed with 666 tracks and 78 vias.
It is built around the ESP32-WROOM-32, HLK-PM01 and ULN2003A, with the AMS1117-3.3 and ZMPT101B among its other parts. Its parts include 17 connectors, 14 ICs, 11 capacitors, 8 diodes and 8 switches. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
Main components
5ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesHLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power ModulesULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsZMPT101B
插件0.2% 1:1 2mA 2mA 4P 4kV Straight Voltage Transformer 插件 Current Sense Transformers ROHSZHE MING LANG XICurrent Sense Transformers
README
README.mdTFC Multicanal Goma
Système embarqué IoT de sous-comptage électrique multicanal (ESP32), développé dans le cadre d'un Travail de Fin de Cycle (ULPGL) : un boîtier mesure et facture séparément la consommation électrique de plusieurs locataires branchés sur une même installation, avec coupure automatique par crédit prépayé et consultation via une application mobile Flutter.
État du projet
- Maquette physique : construite, soudée sur carte perforée et validée sur matériel réel (4 canaux : 1 bailleur + 3 locataires, capteurs simulés par des potentiomètres). C'est cette maquette qui a servi à la validation présentée dans le mémoire.
- Application mobile Flutter : développée et testée en conditions réelles (connexion Wi-Fi à l'ESP32 depuis un téléphone Android).
- PCB (circuit imprimé, 8 canaux, capteurs ACS712/ZMPT101B réels) :
conçu sous KiCad (dossier
kicad/) — routage non terminé, il reste 10 pistes à tracer ; non encore fabriqué ni assemblé. Le firmware cible pour ce PCB (firmware_pcb_capteurs_reels/) est écrit et compile, mais n'a donc pas pu être testé sur le matériel réel.
Structure du dépôt
firmware/ -> firmware de la maquette physique (4 canaux,
potentiometres) - construit et valide
firmware_pcb_capteurs_reels/ -> firmware cible pour le PCB (8 canaux,
ACS712 + ZMPT101B) - PCB pas encore
fabrique, code non teste sur materiel reel
application/ -> application mobile Flutter (Android/iOS)
kicad/ -> conception du circuit imprime (PCB, 8 canaux)
rapport/ -> memoire de TFC
presentation/ -> support de soutenanceChaque dossier de firmware a son propre README.md avec le détail de ce qui
a été testé ou non.
Démarrer
- Firmware maquette :
cd firmware && pio run --target upload(ESP32 branché en USB) — voirGUIDE_ASSEMBLAGE_ET_FLASH.mdetGUIDE_MAQUETTE_BOITIER.mdà la racine pour le montage physique. - Application mobile :
cd application && flutter run(oubuild_apk.shpour générer un APK).
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | C | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8, C9 |
| 9 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J10, J11, J12, J13, J14, J15, J16, J17, J18 |
| 8 | ACS712xLCTR-20A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U3, U4, U5, U6, U7, U8, U9 |
| 8 | D | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | Screw_Terminal_01x02 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J19, J20, J21, J22, J23, J24, J25, J26 |
| 8 | Songle_SLA-05VDC-SL-C_LCSC-C87367 | multical_local:RELAY-TH_SLA-XXVDC-XX-C | K1, K2, K3, K4, K5, K6, K7, K8 |
| 5 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5 |
| 4 | MountingHole_3.2mm | multical_local:MountingHole_3.2mm_NPTH | MH1, MH2, MH3, MH4 |
| 2 | C | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C10, C11 |
| 2 | ULN2003A | Package_DIP:DIP-16_W7.62mm | U13, U14 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U11 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-PMxx | U10 |
| 1 | zmpt101b | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | U12 |
Similar boards
- 2 layers99.6 × 69.8 mm

- 2 layers95 × 55 mm

Smarthome v0.1
whysixmift/smarthome_v0.1
I wanted to control lights and appliances in my room over Wi-Fi without having loose relay modules, breadboards, and 220V AC wires floating around my desk.
63 parts - 2 layers132 × 130 mm

- 2 layers200 × 100 mm

Smart home
vishal007-hacker/smart-home
ESP32-based smart home controller for switching 4 independent 230V AC loads, with per-channel current and voltage sensing, manual override buttons, status LEDs, and an I²C LCD display.
76 parts - 2 layers79.1 × 71.8 mm

PROJECT6 30A Home Automation with ESP32
adarshnarwariya12/PCB_Design
A collection of PCB design projects developed using KiCad.
32 parts1 - 2 layers106.3 × 84.4 mm

30A home Automation device
adivarpe/kicad_designs
in this i attached the multiple designs circuit which is designed from kicad .
33 parts - 2 layers80.5 × 75.5 mm

30A HOME AUTOMATION WITH ESP32
dibyashreesahu/Kicad-Projects
This repository contains a PCB designed using KiCad, an open-source electronic design automation (EDA) software.
33 parts - 2 layers114 × 83 mm

Questions
How big is the Multical PCB?
It measures 260 × 440 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Multical use?
67 parts, built around the ESP32-WROOM-32, HLK-PM01, ULN2003A and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Multical KiCad files?
From the Samuelmathe/TFC-Multicanal-Goma repository on GitHub, at the commit this page was made from: the board is kicad/multical/multical.kicad_pcb and its schematic kicad/ancien-fichier-casse/energie_locatif(1).kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Multical design in my own project?
Its repository states no licence, so its author keeps all rights: ask Samuelmathe before reusing the design.