2 layers60.5 × 35.5 mm
PROJECT3 DC MOTOR SPEED CONTROLLER
adarshnarwariya12/PCB_Design
A collection of PCB design projects developed using KiCad.
19 parts1
2 layers79.1 × 71.8 mm
PROJECT6 30A Home Automation with ESP32
adarshnarwariya12/PCB_Design1A collection of PCB design projects developed using KiCad.
- Size
- 79.1 × 71.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 52
- Pads
- 174
- Tracks, vias
- 276, 18
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 14 Sep 2026
- Updated
- 16 Sep 2026
Overview
PROJECT6 30A Home Automation with ESP32 is an open-source printed circuit board by adarshnarwariya12, from the adarshnarwariya12/PCB_Design repository on GitHub. It is a 2-layer board of 79.1 × 71.8 mm with 32 parts on 52 nets, routed with 276 tracks and 18 vias.
It is built around the ESP32-WROOM-32, HLK-PM01 and AMS1117-3.3, with the S8050 and PR13-5V-450-1C among its other parts. Its parts include 8 resistors, 4 ICs, 4 diodes, 4 switches and 3 connectors. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
Main components
5
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
S8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)PR13-5V-450-1C
插件,19x15.5mm-40℃~+85℃ 100mΩ 10A 10A@30VDC、10A@250VAC 10ms 30V@DC、250V@AC 450mW 55Ω 5V 5ms One set changeover: 1C (SPDT - changeover) Silver Alloy 插件,19x15.5mm Power Relays ROHSCUIPower Relays
README
README.mdPCB_Design
A collection of PCB design projects developed using KiCad.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad_Via | H1, H2, H3, H4 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D4 |
| 2 | PC817 | Package_DIP:DIP-4_W7.62mm | U2, U3 |
| 2 | S8050 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-PMxx | PS1 |
| 1 | PR13-5V-450-1C | PR13-5V-450-1C:RELAY_PR13-5V-450-1C | K2 |
| 1 | RAYEX-L90AS | Relay_THT:Relay_SPST_RAYEX-L90AS | K1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J3 |
| 1 | Screw_Terminal_01x04 | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J2 |
More from adarshnarwariya12/PCB_Design
1Similar boards
- 2 layers80.5 × 75.5 mm
30A HOME AUTOMATION WITH ESP32
dibyashreesahu/Kicad-Projects
This repository contains a PCB designed using KiCad, an open-source electronic design automation (EDA) software.
33 parts - 2 layers114 × 83 mm
- 2 layers85 × 77 mm
Home automation with ESP32
Manideep136/Home-Automation-pcb-with-ESP32
A custom PCB-based home automation system designed around the ESP32 microcontroller. The project is designed to control high-current AC loads using relay switching while providing a compact and organized PCB for the…
32 parts - 2 layers95.2 × 80 mm
- 2 layers88.5 × 74.5 mm
- 2 layers89.5 × 75.4 mm
5A Home Automation
VikramR3/5A_Home_Automation
ESP32-WROOM-32 mains relay controller for lighting and a pump: HLK-PM01 supply, opto-isolated relay drivers. 2-layer KiCad design, 5 A trace rating.
34 partsMIT - 2 layers85.7 × 78.8 mm
ESP32-Home Automation PCB
brandmaharaj12-cmyk/ESP32-Home-Automation-PCB
ESP32 based 30A Home Automation PCB designed using KiCad.
33 parts - 2 layers80.8 × 73.1 mm
30A home automation using esp32
hammadurrehman2006/kicad_lab
A collection of KiCad PCB designs developed during my Electronic Engineering degree (2024-28). Includes university projects, personal experiments, and custom components—featuring schematics, layouts, Gerber files, and…
33 parts1
Questions
How big is the PROJECT6 30A Home Automation with ESP32 PCB?
It measures 79.1 × 71.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PROJECT6 30A Home Automation with ESP32 use?
32 parts, built around the ESP32-WROOM-32, HLK-PM01, AMS1117-3.3 and S8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PROJECT6 30A Home Automation with ESP32 KiCad files?
From the adarshnarwariya12/PCB_Design repository on GitHub, at the commit this page was made from: the board is P2_ 30A_Home_Automation_with_ESP32/P2_30A_Home_Automation_with_ESP32/PCB/PROJECT6_ 30A_Home_Automation_with_ESP32.kicad_pcb and its schematic P1_DC_Motor_Speed_Controller/P1_DC_Motor_Speed_Controller/Schematic/PROJECT3_DC_MOTOR_SPEED_CONTROLLER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PROJECT6 30A Home Automation with ESP32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask adarshnarwariya12 before reusing the design.