4 layers154.5 × 137 mm
Kup lulz
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
384 parts17BSD-3-Clause
4 layers34 × 43 mm
Sca target
azonenberg/misc-devboards17Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
- Size
- 34 × 43 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 42
- Nets
- 57
- Pads
- 182
- Tracks, vias
- 360, 75
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 Sep 2017
- Updated
- 29 Oct 2026
Overview
Sca target is an open-source printed circuit board by azonenberg, from the azonenberg/misc-devboards repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 34 × 43 mm with 42 parts on 57 nets, routed with 360 tracks and 75 vias.
It is built around the FT234XD-R and MI0603J601R-10. Its parts include 13 resistors, 10 capacitors, 5 connectors, 4 diodes and 2 ICs. It belongs with the STM32 boards of this library.
Main components
2Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.47 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C2, C3, C4, C6, C116, C117, C208 |
| 4 | 33K | azonenberg_pcb:EIA_0402_RES_NOSILK | R3, R4, R8, R9 |
| 4 | GREEN | azonenberg_pcb:EIA_0402_LED | D1, D2, D3, D4 |
| 2 | 0 | azonenberg_pcb:EIA_0402_RES_NOSILK | R60, R61 |
| 2 | 24 | azonenberg_pcb:EIA_0402_RES_NOSILK | R1, R2 |
| 2 | 4.7 uF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C1, C5 |
| 2 | 5.1k | azonenberg_pcb:EIA_0402_RES_NOSILK | R103, R104 |
| 2 | GND | azonenberg_pcb:CONN_HEADER_2.54MM_1x1 | J3, J4 |
| 1 | 0.1 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C118 |
| 1 | 10K | azonenberg_pcb:EIA_0402_RES_NOSILK | R5 |
| 1 | 1K | azonenberg_pcb:EIA_0402_RES_NOSILK | R6 |
| 1 | 2A | azonenberg_pcb:EIA_0402_RES_NOSILK | F1 |
| 1 | 33 | azonenberg_pcb:EIA_0402_RES_NOSILK | R7 |
| 1 | BLM31KN271SN1L | azonenberg_pcb:EIA_1206_CAP_NOSILK | L8 |
| 1 | CORTEX_DEBUG_ETM | azonenberg_pcb:CONN_HEADER_1.27MM_2x10_SMT_SAMTEC_FTSH-110-01-L-DV-K | J2 |
| 1 | FT234XD | azonenberg_pcb:DFN_12_0.45MM_3x3MM | U2 |
| 1 | JUMPER_PWROUT | azonenberg_pcb:CONN_HEADER_2.54MM_1x2 | JP1 |
| 1 | LOGO | w_logo:Logo_silk_ROHS_5x2.8mm | M8 |
| 1 | LOGO | w_logo:Logo_silk_OSHW_6x6mm | M10 |
| 1 | LOGO | azonenberg_pcb:LONGTHING-1200DPI | M7 |
| 1 | LOGO | w_logo:Logo_silk_WEEE_3.4x5mm | M9 |
| 1 | MI0603J601R-10 | azonenberg_pcb:EIA_0603_INDUCTOR_NOSILK | FB1 |
| 1 | PMOD_HOST | azonenberg_pcb:CONN_HEADER_2.54MM_2x6_RA_PMOD_HOST | J1 |
| 1 | STM32L431-QFN32 | azonenberg_pcb:QFN_32_0.5MM_5x5MM | U1 |
| 1 | USB_C_Receptacle_USB2.0 | azonenberg_pcb:GCT_USB4500-03-0-A-PIP | J14 |
Questions
How big is the Sca target PCB?
It measures 34 × 43 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Sca target use?
42 parts, built around the FT234XD-R and MI0603J601R-10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sca target KiCad files?
From the azonenberg/misc-devboards repository on GitHub, at the commit this page was made from: the board is sca-target/sca-target.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sca target design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from azonenberg/misc-devboards
12- 6 layers90 × 94.5 mm
Fpga stm32-ifaces
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
274 parts17BSD-3-Clause - 4 layers108 × 115.5 mm
Process test-0402-reduction
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
206 parts17BSD-3-Clause - 4 layers100.5 × 62.5 mm
Baset1-media converter
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
180 parts17BSD-3-Clause - 4 layers77 × 71.5 mm
Ksz9031-eval
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
173 parts17BSD-3-Clause - 4 layers73 × 88 mm
Fpga test kintex676-artix484
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
161 parts17BSD-3-Clause - 4 layers42 × 157.5 mm
Quad relay mux
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
102 parts17BSD-3-Clause - 4 layers35 × 73.5 mm
Lpr rgmii phy
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
86 parts17BSD-3-Clause - 4 layers105 × 28.5 mm
Tragiclaser phy
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
83 parts17BSD-3-Clause - 4 layers74 × 58 mm
Ltc3374-test
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
77 parts17BSD-3-Clause - 2 layers66 × 93.5 mm
Christmas tree
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
65 parts17BSD-3-Clause - 4 layers57 × 60 mm
T20-l431-carrier
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
60 parts17BSD-3-Clause
Similar boards
- 8 layers126 × 117 mm
- 6 layers185 × 93 mm
Linecard
azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch
621 parts36BSD-3-Clause - 4 layers54 × 50 mm
Reworkctf v2
azonenberg/reworkctf
This is a points-based challenge board intended for practicing of PCB rework and circuit editing skills. This is not a circuit debug challenge.
131 parts34BSD-3-Clause - 2 layers46 × 19 mm
MCU Link Standalone
ErichStyger/McuLink-Mini
Version of the NXP MCU-Link Debug CMSIS-DAP Debug Probe.
69 parts32MIT - 8 layers145 × 139 mm
Latentpink
azonenberg/latentpacket
The LATENTPACKET network infrastructure platform
841 parts30BSD-3-Clause - 10 layers130 × 90 mm
- 8 layers154 × 125 mm
- 10 layers165 × 121 mm
Triggercrossbar
azonenberg/triggercrossbar
Rack mountable crossbar matrix for T&M trigger in/out signals, allowing dynamic reconfiguration of an experiment without recabling
633 parts8BSD-3-Clause