4 layers154.5 × 137 mm
Kup lulz
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
384 parts17BSD-3-Clause
4 layers73 × 54 mm
Pic32mx jtag
azonenberg/misc-devboards17Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
- Size
- 73 × 54 mm
- Copper layers
- 4
- Thickness
- 1.74 mm
- Parts
- 41
- Nets
- 70
- Pads
- 200
- Tracks, vias
- 542, 68
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 Sep 2017
- Updated
- 29 Oct 2026
Overview
Pic32mx jtag is an open-source printed circuit board by azonenberg, from the azonenberg/misc-devboards repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 73 × 54 mm with 41 parts on 70 nets, routed with 542 tracks and 68 vias.
Its parts include 11 capacitors, 10 connectors, 9 resistors, 4 diodes and 2 ICs. It belongs with the interfaces and adapters boards and the PIC boards of this library.
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.47 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C2, C4, C6, C8, C10, C11 |
| 5 | 470 | azonenberg_pcb:EIA_0402_RES_NOSILK | R1, R6, R7, R8, R9 |
| 4 | GREEN | azonenberg_pcb:EIA_0805_LED | D1, D2, D3, D4 |
| 4 | PMOD_HOST | azonenberg_pcb:CONN_HEADER_2.54MM_2x6_RA_PMOD_HOST | J3, J4, J5, J7 |
| 3 | 33 | azonenberg_pcb:EIA_0402_RES_NOSILK | R3, R4, R5 |
| 3 | 4.7 uF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C1, C3, C9 |
| 2 | U.FL | azonenberg_pcb:CONN_U.FL_TE_1909763-1 | J9, J10 |
| 1 | 0.1 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C7 |
| 1 | 10 uF | azonenberg_pcb:EIA_0805_CAP_NOSILK | C5 |
| 1 | 10K | azonenberg_pcb:EIA_0402_RES_NOSILK | R2 |
| 1 | BARREL_JACK | azonenberg_pcb:CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | J1 |
| 1 | CONN_01X03 | azonenberg_pcb:CONN_HEADER_2.54MM_1x3 | J8 |
| 1 | CONN_01X05 | azonenberg_pcb:CONN_HEADER_2.54MM_1x5 | J2 |
| 1 | LDO1117-33_SOT223 | azonenberg_pcb:SOT223-4 | U2 |
| 1 | LOGO | azonenberg_pcb:LONGTHING-1200DPI | G*** |
| 1 | PIC32MX6xxFxxxH | azonenberg_pcb:QFP_64_0.5MM | U1 |
| 1 | XILINX_JTAG | azonenberg_pcb:XILINX_JTAG_PTH_MOLEX_0878311420 | J6 |
The 37 most common of 41 parts.
Questions
How big is the Pic32mx jtag PCB?
It measures 73 × 54 mm and has 4 copper layers, 1.74 mm thick.
What parts does the Pic32mx jtag use?
41 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pic32mx jtag KiCad files?
From the azonenberg/misc-devboards repository on GitHub, at the commit this page was made from: the board is pic32mx-jtag/pic32mx-jtag.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pic32mx jtag design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from azonenberg/misc-devboards
12- 6 layers90 × 94.5 mm
Fpga stm32-ifaces
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
274 parts17BSD-3-Clause - 4 layers108 × 115.5 mm
Process test-0402-reduction
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
206 parts17BSD-3-Clause - 4 layers100.5 × 62.5 mm
Baset1-media converter
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
180 parts17BSD-3-Clause - 4 layers77 × 71.5 mm
Ksz9031-eval
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
173 parts17BSD-3-Clause - 4 layers73 × 88 mm
Fpga test kintex676-artix484
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
161 parts17BSD-3-Clause - 4 layers42 × 157.5 mm
Quad relay mux
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
102 parts17BSD-3-Clause - 4 layers35 × 73.5 mm
Lpr rgmii phy
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
86 parts17BSD-3-Clause - 4 layers105 × 28.5 mm
Tragiclaser phy
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
83 parts17BSD-3-Clause - 4 layers74 × 58 mm
Ltc3374-test
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
77 parts17BSD-3-Clause - 2 layers66 × 93.5 mm
Christmas tree
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
65 parts17BSD-3-Clause - 4 layers57 × 60 mm
T20-l431-carrier
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
60 parts17BSD-3-Clause
Similar boards
- 4 layers33.5 × 15 mm
- 4 layers43 × 45.8 mm
- 4 layers23.4 × 12 mm
- 4 layers12.7 × 11.6 mm
- 4 layers55 × 14.7 mm
- 4 layers90 × 99 mm
SEthernet
rhalkyard/SEthernet
Modern, low-cost 10/100 Ethernet for the Macintosh SE and SE/30
41 parts167GPL-3.0 - 4 layers54.6 × 31 mm
- 4 layers101.6 × 76.2 mm
8051dumper
JohnDMcMaster/8051dumper
by NF6X. Forked from: https://gitlab.com/NF6X_Retrocomputing/8051dumper
41 parts27