Skip to the content
2 layers64 × 98 mmSnail, the printed circuit board in 3D

🚧 (IOCCC29 entry) A little mind puzzle

Size
64 × 98 mm
Copper layers
2
Thickness
1.6 mm
Parts
90
Nets
59
Pads
269
Tracks, vias
322, 172
Pours
31
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
16 Mar 2026
Updated
15 Aug 2026

Overview

Snail is an open-source printed circuit board by ayuusweetfish, from the ayuusweetfish/Beanie repository on GitHub. It is a 2-layer board of 64 × 98 mm with 90 parts on 59 nets, routed with 322 tracks and 172 vias.

It is built around the WS2812B and MMBT3904. Its parts include 40 capacitors, 39 diodes, 4 switches, 2 resistors and 1 transistor.

Main components

2

README

README.md

Beanie the Snail

Submission to IOCCC29. See prog.c for the code, and remarks.md for the comments.

Parts

90
QtyValueFootprintReferences
38100nCapacitor_SMD:C_0402_1005MetricC100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113, C114, C115 +22
35WS2812BLocal:LED_ARGB_5050D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113, D114, D115 +19
4SW_PushButton_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mmSW0, SW1, SW2, SW3
3WS2812BLocal:LED_ARGB_3528D135, D136, D137
210uCapacitor_SMD:C_0603_1608MetricC1, C2
2LOGOLOGOG***, G***
11N5819Diode_SMD:D_SOD-323D1
1220Resistor_SMD:R_0402_1005MetricR2
14.7kResistor_SMD:R_0402_1005MetricR1
1Arduino Nano SuperMiniLocal:DevBoard_SuperMiniJ1
1BuzzerBuzzer_Beeper:MagneticBuzzer_StarMicronics_QMB-105BZ1
1MMBT3904Package_TO_SOT_SMD:SOT-23Q1

More from ayuusweetfish/Beanie

1
  • 2 layersLED Row, the printed circuit board in 3D

    LED Row

    ayuusweetfish/Beanie

    🚧 (IOCCC29 entry) A little mind puzzle

    10 parts

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 4 layers67 × 98 mmSJ-201-R6, the printed circuit board in 3D

    SJ-201-R6

    MycroftAI/hardware-mycroft-mark-II

    Mycroft's Mark II Rpi mechanical, electrical and industrial designs

    235 parts113
  • 2 layers148.6 × 192.2 mmBadge, the printed circuit board in 3D

    Badge

    NuttyShell/NuttyBadge

    NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software

    169 parts31GPL-3.0
  • 2 layers370.1 × 106 mmCypher, the printed circuit board in 3D

    Cypher

    westfoxtrot/cypher_pcb

    Custom mechanical keyboard PCB

    324 parts19CC-BY-SA-4.0
  • 2 layers236.1 × 74.2 mmUT47.3, the printed circuit board in 3D

    UT47.3

    coarse/UT47.3

    STM32 40% keyboard based on Gnap

    175 parts7
  • 2 layers110 × 220 mmFin ltm, the printed circuit board in 3D

    Fin ltm

    HekiNav/finland-live-train-map

    Some of the LEDs are missing because they were removed after making the initial layout

    423 parts7MIT
  • 2 layers96.6 × 102.2 mmTalentBadge, the printed circuit board in 3D

    TalentBadge

    eacandelas/BENOTL

    Badge Electronica No Oficial para Talent Land Mexico 2018.

    67 parts3Apache-2.0

Questions

How big is the Snail PCB?

It measures 64 × 98 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Snail use?

90 parts, built around the WS2812B and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Snail KiCad files?

From the ayuusweetfish/Beanie repository on GitHub, at the commit this page was made from: the board is misc/handheld_hw/Snail.kicad_pcb and its schematic misc/handheld_hw/Snail.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Snail design in my own project?

Its repository states no licence, so its author keeps all rights: ask ayuusweetfish before reusing the design.