2 layers93.3 × 102.5 mm
TalentBadge
eacandelas/BENOTL
Badge Electronica No Oficial para Talent Land Mexico 2018.
66 parts3Apache-2.0
2 layers96.6 × 102.2 mm
TalentBadge
eacandelas/BENOTL3Badge Electronica No Oficial para Talent Land Mexico 2018.
- Size
- 96.6 × 102.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 53
- Pads
- 220
- Tracks, vias
- 607, 77
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Feb 2018
- Updated
- 28 Apr 2021
Overview
TalentBadge is an open-source printed circuit board by eacandelas, from the eacandelas/BENOTL repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 96.6 × 102.2 mm with 67 parts on 53 nets, routed with 607 tracks and 77 vias.
It is built around the CP2102N-EK, WS2812B and SP0503BAHTG, with the MMBT3904 among its other parts. Its parts include 16 capacitors, 16 ICs, 13 resistors, 4 connectors and 3 transistors. It belongs with the lEDs and displays boards of this library.
Main components
4CP2102N-EK
-- USB Conversion Modules ROHSSilicon LabsUSB Conversion Modules
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
SP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdThe Badge of the Lands
NOTA:
Este proyecto ha dejado de recibir soporte, pero recuerde es un proyecto opensource puede tomarlo y modificarlo a su gusto, gracias por el apoyo para crear este proyecto aprendimos demasiado y ahora tenemos nuevos proyectos con badges, esperalos pronto
Badge Electronico No Oficial para Talent Land México 2018. Hackday project
Caracteristicas
- Basado en el modulo WIFi ESP8266
- 12 Leds WS2812B
- Pantalla OLED 128x64
- Puerto USB
- Programador incluido
Esquematico
Diagrama en PDF y archivos para KiCad
Agradecemos a nuestros patrocinadores
Autores
By:
@gsreynaga - Layout y routing.
@ForeverWero - Footprints y layout
@elmundoverdees - Esquematico y BOM
@armando_are - Diseño
@sabasacustico - PM y logistica.
Pagina del proyecto
Pagina del proyecto en Hackday
Licencia
Firmware bajo una licencia MIT. ver el archivo LICENSE para mas información.
Hardware lanzado bajo una licencia CERN Open Hardware Licence v1.2. Ver el archivo LICENSE_HARDWARE para mas información.
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C2, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18 |
| 12 | ws2812b | LEDs:LED_WS2812B-PLCC4 | U5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15, U16 |
| 9 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R4, R5, R6, R7, R8, R10, R11, R14 |
| 2 | 4.7uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Hand | C3, C4 |
| 2 | MMBT3904 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2 |
| 1 | 100 | Resistors_SMD:R_0805_HandSoldering | R9 |
| 1 | 10K | Resistors_SMD:R_0805_HandSoldering | R15 |
| 1 | 1k | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 4.7uF | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 470 | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | AP111733 | TO_SOT_Packages_SMD:SOT-223 | U4 |
| 1 | B1 | talentBadge:SW_TL3342F160QG | SW1 |
| 1 | B2 | talentBadge:SW_TL3342F160QG | SW2 |
| 1 | Batt | talentBadge:Keystone_2479_3xAAA | P3 |
| 1 | CP2102N | talentBadge:QFN-24-5x5mm_Pitch0.50mm | U2 |
| 1 | Diode | Diodes_SMD:D_SMA | D2 |
| 1 | ESP-13-WROOM-02 | talentBadge:ESP-13-WROOM-02 | U1 |
| 1 | Fuse_Small | talentBadge:0440.500WRA | F1 |
| 1 | G*** | talentBadge:Chica_SilkS_1 | svg2mod |
| 1 | G*** | talentBadge:Chica_Contorno | svg2mod |
| 1 | G*** | talentBadge:mouser_logo | svg2mod |
| 1 | IR phototransistor | LEDs:LED_D5.0mm | Q3 |
| 1 | LED | LEDs:LED_D3.0mm | D1 |
| 1 | LOGO | talentBadge:pcbway_logo | G*** |
| 1 | LOGO | talentBadge:makers_logo | G*** |
| 1 | LOGO | talentBadge:espressif_logo | G*** |
| 1 | LOGO | talentBadge:wurth_logo | G*** |
| 1 | OLED | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P2 |
| 1 | PS | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P4 |
| 1 | RST | talentBadge:SW_TL3342F160QG | SW3 |
| 1 | SP0503BAHTG | talentBadge:SOT143 | U3 |
| 1 | USB_A | talentBadge:629105150921 | P1 |
The 65 most common of 67 parts.
More from eacandelas/BENOTL
1Similar boards
- 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers185.9 × 120 mm
KwartzLab SensorBoard Rev3-Panel
kwartzlab/Environmental-Sensor
The source for the environmental sensors used at Kwartzlab
200 parts3 - 2 layers145 × 165 mm
- 4 layers95 × 95 mm
TelemetryOnboard
Spaceflight-Rocketry-Giessen-e-V/Telemetry
Open-Source Rocket Telemetry System Based On Radiocrafts RC232 Radio Modules
143 parts27CERN-OHL-S-2.0 - 2 layers18.4 × 20.3 mm
CP2102N bb
WRansohoff/CP2102N_simple
Simple breakout board for a CP2102N USB / UART bridge.
18 parts9MIT - 2 layers123 × 66.5 mm
- 4 layers145.5 × 89.6 mm
- 4 layers80 × 80 mm
Questions
How big is the TalentBadge PCB?
It measures 96.6 × 102.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TalentBadge use?
67 parts, built around the CP2102N-EK, WS2812B, SP0503BAHTG and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TalentBadge KiCad files?
From the eacandelas/BENOTL repository on GitHub, at the commit this page was made from: the board is BENOTL-HW/Chica/talentBadge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TalentBadge design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).