

Kicad project
- Size
- 123 × 66.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 59
- Pads
- 160
- Tracks, vias
- 264, 21
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Mar 2024
- Updated
- 1 Jul 2024
Overview
Kicad project is an open-source printed circuit board by teaching-FEEC, from the teaching-FEEC/ea075-2024.1 repository on GitHub. It is a 2-layer board of 123 × 66.5 mm with 27 parts on 59 nets, routed with 264 tracks and 21 vias.
It is built around the ATTINY202-SSN, CP2102N-EK and PCF8574T, with the PN2222A and SP0503BAHTG among its other parts. Its parts include 11 resistors, 5 ICs, 4 capacitors, 3 connectors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATTINY202-SSN
SOIC-8-40℃~+105℃ 1.8V~5.5V 10bit 128Byte 20MHz 2KB 6 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CP2102N-EK
-- USB Conversion Modules ROHSSilicon LabsUSB Conversion ModulesPCF8574T
SOP-16-300mil-40℃~+85℃ 100kHz 10uA 2.5V~6V 25mA 300uA 8 8 Cascading and address extension、Built-in LED driver I2C Interrupt Output Open-drain SOP-16-300mil I/O Expanders ROHSHGSEMII/O ExpandersPN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)SP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdEA075 - Introdução ao Projeto de Sistemas Embarcados
1° semestre de 2024
Profa. Paula Dornhofer Paro Costa
⚠️ Não altere este arquivo README.MD
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R7, R9, R10, R11 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C4 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C3 |
| 1 | 10k | Potentiometer_SMD:Potentiometer_Bourns_3214G_Horizontal | RV1 |
| 1 | 22.1k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 4.3k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 47.1k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | ATtiny202 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CP2102N | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.45mm_EP1.6x1.6mm | U3 |
| 1 | Conn_01x05_Socket | Connector_TE-Connectivity:TE_826576-5_1x05_P3.96mm_Vertical | J2 |
| 1 | LCD-016N002L | Display:LCD-016N002L | U1 |
| 1 | NEO-6M-GPS | components_kicad:XCVR_NEO-6M-GPS | U4 |
| 1 | PCF8574 | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U2 |
| 1 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | U.FL-R-SMT_01_ | components_kicad:HRS_U.FL-R-SMT_01_ | J3 |
| 1 | USB_A | Connector_USB:USB_A_Receptacle_GCT_USB1046 | J1 |
More from teaching-FEEC/ea075-2024.1
1- 2 layers124.5 × 109.2 mm

Similar boards
- 2 layers145 × 165 mm

- 4 layers95 × 95 mm

TelemetryOnboard
Spaceflight-Rocketry-Giessen-e-V/Telemetry
Open-Source Rocket Telemetry System Based On Radiocrafts RC232 Radio Modules
143 parts27CERN-OHL-S-2.0 - 2 layers18.4 × 20.3 mm

CP2102N bb
WRansohoff/CP2102N_simple
Simple breakout board for a CP2102N USB / UART bridge.
18 parts9MIT - 2 layers96.6 × 102.2 mm

TalentBadge
eacandelas/BENOTL
Badge Electronica No Oficial para Talent Land Mexico 2018.
67 parts3Apache-2.0 - 4 layers145.5 × 89.6 mm

- 4 layers80 × 80 mm

- 4 layers44.4 × 59.3 mm

- 2 layers27 × 14 mm

Questions
How big is the Kicad project PCB?
It measures 123 × 66.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kicad project use?
27 parts, built around the ATTINY202-SSN, CP2102N-EK, PCF8574T and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kicad project KiCad files?
From the teaching-FEEC/ea075-2024.1 repository on GitHub, at the commit this page was made from: the board is projetos/descongestionator/kicad_project/kicad_project.kicad_pcb and its schematic projetos/descongestionator/kicad_project/kicad_project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kicad project design in my own project?
Its repository states no licence, so its author keeps all rights: ask teaching-FEEC before reusing the design.