

Design files V0.1
My design files. Abandon all hope ye who enter here.
- Size
- 30 × 23 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 46
- Pads
- 148
- Tracks, vias
- 376, 19
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files V0.1 is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 30 × 23 mm with 42 parts on 46 nets, routed with 376 tracks and 19 vias.
It is built around the ATMEGA328-MU, LIS3DH and MIC5225-3.3YM5. Its parts include 13 resistors, 13 connectors, 4 capacitors, 3 ICs and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328-MU
VQFN-32-EP(5x5)-40℃~+85℃ 1.8V~5.5V 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Calendar function、Built-in temperature sensor、Touch function VQFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LIS3DH
LGA-16(3x3)-40℃~+85℃ 1.71V~3.6V 16bit 500nA Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-16(3x3) Accelerometers ROHSSTMicroelectronicsAccelerometersMIC5225-3.3YM5
SOT23-53.3V 150mA Ultra-Low Current uCap Low Dropout RegulatorMicrochip TechnologyUncategorised
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100 | footprints:R_0603 | R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 4 | CONN | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J4, J5, J44, J55 |
| 3 | 10K | footprints:R_0603 | R1, R2, R3 |
| 2 | 0.1uF | footprints:C_0805 | C2, C3 |
| 2 | 10uF | footprints:C_0805 | C1, C4 |
| 2 | HL | footprints:PIN_HEADER_LED | J1, J6 |
| 2 | TL | footprints:PIN_HEADER_LED | J7, J8 |
| 2 | UND | footprints:LED_0805_HandSoldering | D4, D5 |
| 1 | 100K | footprints:R_0603 | R13 |
| 1 | ATMEGA328-MU | Housings_DFN_QFN:QFN-32-1EP_5x5mm_Pitch0.5mm | U1 |
| 1 | BAT | Connectors_JST:JST_SH_SM02B-SRSS-TB_02x1.00mm_Angled | J3 |
| 1 | CHG | Connectors_JST:JST_SH_SM02B-SRSS-TB_02x1.00mm_Angled | J2 |
| 1 | D | Diodes_SMD:D_SOD-123F | D1 |
| 1 | DSH | footprints:PIN_HEADER_LED | J9 |
| 1 | ISP | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | CON1 |
| 1 | JST_PH | footprints:JST_PH_S2B-PH-K_02x2.00mm_Angled | J10 |
| 1 | LIS3DH | LIS3DH_EP | U2 |
| 1 | MIC5225-3.3 | TO_SOT_Packages_SMD:SOT-23-5 | U3 |
| 1 | MadeInOregonRev25 | footprints:MadeInOregonRev25 | VAL |
| 1 | SW_SPDT | footprints:SPST_SMD | SW1 |
The 38 most common of 42 parts.
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 6 layers30 × 57.1 mm

- 4 layers51 × 19 mm

- 2 layers

Test project with uC
DeshmukhMalhar/sch2header
Scripts to auto-generate pin defination header from schematics
5 parts - 4 layers47.5 × 22 mm

Arduino nano
MaheshChowdaryDamuluri/Arduino-Nano-Project
Welcome to the official repository for the Custom Arduino Nano Hardware Clone project. This repository houses the full programmatic schematic blueprints, advanced multi-layer stackup routing configurations, and…
35 partsMIT - 2 layers45.2 × 19.8 mm

- 2 layers68.5 × 53.4 mm

Arduino UNO Clone
swapnil-maurya/Arduino-UNO-Clone-PCB
Arduino UNO Clone PCB Design using KiCad
52 parts - 2 layers

- 2 layers15.5 × 0.3 mm

Questions
How big is the Design files V0.1 PCB?
It measures 30 × 23 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files V0.1 use?
42 parts, built around the ATMEGA328-MU, LIS3DH and MIC5225-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files V0.1 KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/HotWheels/328 Accel/design_files V0.1/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files V0.1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.