

Arduino nano
Welcome to the official repository for the Custom Arduino Nano Hardware Clone project. This repository houses the full programmatic schematic blueprints, advanced multi-layer stackup routing configurations, and…
- Size
- 47.5 × 22 mm
- Copper layers
- 4
- Thickness
- 1.33 mm
- Parts
- 35
- Nets
- 55
- Pads
- 176
- Tracks, vias
- 529, 67
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 29 Jun 2026
- Updated
- 29 Jun 2026
Overview
Arduino nano is an open-source printed circuit board by MaheshChowdaryDamuluri, from the MaheshChowdaryDamuluri/Arduino-Nano-Project repository on GitHub, published under the MIT licence. It is a 4-layer board of 47.5 × 22 mm with 35 parts on 55 nets, routed with 529 tracks and 67 vias.
It is built around the ATMEGA328-MU, FT232RL and LM1117MP-5.0. Its parts include 10 capacitors, 7 resistors, 5 diodes, 5 connectors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328-MU
VQFN-32-EP(5x5)-40℃~+85℃ 1.8V~5.5V 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Calendar function、Built-in temperature sensor、Touch function VQFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)FT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB ConvertersLM1117MP-5.0
SOT-223Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTexas Instruments
README
README.md⚡ Custom Arduino Nano Compatible PCB Design Project
Welcome to the official repository for the Custom Arduino Nano Hardware Clone project. This repository houses the full programmatic schematic blueprints, advanced multi-layer stackup routing configurations, and fabrication-ready source materials engineered entirely within the KiCad design suite.
Unlike a standard commercial breakout board, this implementation optimizes power rail stability, enhances differential signal impedance, and introduces precise physical test points for desktop diagnostic verification.
📐 1. Technical System Architecture
The hardware architecture systematically translates your top-level project settings into specialized component zones designed to reduce trace length and eliminate unwanted parasitic loops:
🧠 Core Microcontroller Node (Arduino nano.kicad_sch)
- Processor Unit: Features a high-performance 8-bit AVR microcontroller housed in an ultra-compact, surface-mount QFN-32 package footprint.
- System Clock: Driven by a precision 16MHz ceramic resonator (
Murata CSTNE) to ensure predictable, jitter-free code execution timing. - ICSP Header Array: Breaks out a standard 3-pin In-Circuit Serial Programming (ICSP) interface alongside standard vertical female pin-socket strips for effortless external bootloader flashing and pin mapping.
🔌 USB Telemetry & Serial Interface
- Interface Bridge: Built around the rugged FT232RL SSOP-28 USB-to-Serial converter chip, delivering bulletproof stability over long debugging sessions.
- Upstream Protection: Protects your computer's USB controller using a resettable surface-mount 0603 Polyfuse to clamp unexpected short-circuits instantly.
- Differential Signaling: Routes raw data lines using precise trace spacing down to test pads (
TP1andTP2) for real-time oscilloscope signal inspection.
⚡ Power Supply & Linear Regulation Network
- DC-DC Step-Down: Incorporates a dedicated low-dropout (LDO) LM1117MP-5.0 fixed linear regulator in a robust SOT-223 package.
- Filtering Topology: Employs a multi-stage decoupling matrix combining polarized Tantalum bulk smoothing capacitors ($4.7\mu\text{F}$) with high-frequency $100\text{nF}$ ceramic filtering passives positioned right at the power input boundaries to block supply ripple spikes.
- Input Isolation: Implements an internal Schottky reverse-voltage protection diode to safely manage power handover between the external input pin and the desktop USB port.
🛠️ 2. PCB Layer Stackup & Layout Disciplines
The layout database shifts away from legacy double-sided prototyping to a high-speed 4-layer PCB architecture configured inside the board setup:
- Top Layer (
F.Cu): High-density component landing networks and primary signal trace breakouts. - Inner Layer 1 (
In1.Cu): Solid Ground Plane (GND) serving as a low-impedance return path to significantly reduce EM emissions. - Inner Layer 2 (
In2.Cu): Specialized Power Grid distribution plane handling multiple system voltages. - Bottom Layer (
B.Cu): Secondary routing pathways and clear status indicators.
- 🎨 Solder Mask Aesthetic: Formatted for a sleek, premium Blue Solder Mask application over high-grade FR4 core material.
- 🚦 Status LEDs: Incorporates four surface-mount visual telemetry indicators (Yellow for Power tracking, Green for Reset lines, and Red/Green options for system notifications).
📋 3. Project Bill of Materials (BOM)
| Designator | Component Quantity | Component Value | Package Footprint | Purpose / Function |
|---|---|---|---|---|
| U1 | 1 | MCU Core Chip | QFN-32-1EP (5x5mm) | Primary Microcontroller Core |
| U3 | 1 | FT232RL | SSOP-28_5.3x10.2mm | USB to Serial Communication Bridge |
| U2 | 1 | LM1117MP-5.0 | SOT-223-3 (TabPin2) | +5V Low-Dropout Regulator |
| F1 | 1 | Polyfuse (0603) | D_0603_1608Metric | Resettable Overcurrent Protection |
| Y1 | 1 | 16MHz Resonator | CSTxExxV-3Pin (3.0x1.1mm) | Core Clock Source Oscillator |
| J1 | 1 | USB_B_Mini | USB_Mini-B_Horizontal | System Power & Programming Interface |
| SW1 | 1 | SW_Push | Panasonic_EVQPUK_EVQPUB | Master Hardware Reset Button |
| C4, C9 | 2 | 4u7_16V | CP_EIA-3216-10_Kemet-I | Polarized Tantalum Smoothing Capacitors |
| C1, C2, C5, C6 | 4 | 1u | C_0603_1608Metric | Ceramic Decoupling Passives |
| C3, C7, C8, C10 | 4 | 100n | C_0603_1608Metric | High-Frequency Bypass Capacitors |
| R1 - R7 | 7 | 1k | D_0603_1608Metric | Current Limiting Resistors |
| D1 - D5 | 5 | LED Colors | LED_0805_2012Metric | Telemetry & Visual Status Indicators |
📂 4. Repository File Directory
├── Arduino nano.kicad_pro # Master project settings linking schematics & board layers
├── Arduino nano.kicad_sch # Top-level interactive hardware electrical schema
├── Arduino nano.kicad_pcb # Completed physical 4-layer trace layout matrix
├── Arduino nano.kicad_prl # Project local display preferences & monitor settings
├── .gitignore # Automatically generated rule patterns filtering out bak files
└── LICENSE # MIT Open-Source Hardware Licensing certificationParts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1k | Diode_SMD:D_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C7, C8, C10 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5, C6 |
| 2 | 4u7_16V | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I | C4, C9 |
| 2 | Conn_01x15_Pin | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J2, J4 |
| 2 | Green | LED_SMD:LED_0805_2012Metric | D2, D5 |
| 2 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | 0603 | Diode_SMD:D_0603_1608Metric | F1 |
| 1 | 16MHz | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | ATmega328-M | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Diode | Diode_SMD:D_MicroSMP_AK | D3 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U3 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | LM1117MP-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Red | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | SW_Push | Button_Switch_SMD:Panasonic_EVQPUK_EVQPUB | SW1 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Wuerth_65100516121_Horizontal | J1 |
| 1 | Yellow | LED_SMD:LED_0805_2012Metric | D1 |
Similar boards
- 4 layers51 × 19 mm

- 4 layers45 × 19 mm

- 4 layers45.7 × 19.5 mm

Arduino Nano
Hirusha785/arduino-nano-kicad-design
⚙️ Arduino Nano-compatible development board designed in KiCad for the Mastering KiCad Specialization final project. Includes schematic, PCB layout, 3D renders, BOM, and fabrication-ready files for manufacturing. 🚀📐
35 parts - 2 layers120 × 120 mm

- 2 layers18 × 43.2 mm

- 2 layers56.5 × 61.5 mm

Arduino Nano
Rehmanchaudhary/custom-pcb-design
Custom Arduino Nano–compatible board — full schematic and PCB design in KiCad, physically etched and soldered
39 parts - 2 layers54 × 24.6 mm

Nano
riteshh27/arduino-nano-clone
KiCad project for an Arduino Nano clone (ATmega328P + FT232RL USB-serial)
33 parts - 4 layers44 × 18.4 mm

Arduino Nano
sebastiansebs/Arduino-Nano-from-Scratch
Custom-designed microcontroller development board based on the ATmega328P-M. The board integrates a USB-to-serial converter for programming and UART/SPI communication with comprehensive pin headers for flexible…
39 parts
Questions
How big is the Arduino nano PCB?
It measures 47.5 × 22 mm and has 4 copper layers, 1.33 mm thick.
What parts does the Arduino nano use?
35 parts, built around the ATMEGA328-MU, FT232RL and LM1117MP-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduino nano KiCad files?
From the MaheshChowdaryDamuluri/Arduino-Nano-Project repository on GitHub, at the commit this page was made from: the board is Arduino nano.kicad_pcb and its schematic Arduino nano.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduino nano design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).