

Ard nano2
PCB works
- Size
- 51 × 19 mm
- Copper layers
- 4
- Thickness
- 1.33 mm
- Parts
- 35
- Nets
- 57
- Pads
- 168
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Nov 2025
- Updated
- 3 Nov 2025
Overview
Ard nano2 is an open-source printed circuit board by Amalthekkat, from the Amalthekkat/PCB-Portfolio repository on GitHub. It is a 4-layer board of 51 × 19 mm with 35 parts on 57 nets.
It is built around the ATMEGA328-MU, FT232RL and LM1117MP-5.0. Its parts include 10 capacitors, 7 resistors, 5 diodes, 5 connectors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328-MU
VQFN-32-EP(5x5)-40℃~+85℃ 1.8V~5.5V 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Calendar function、Built-in temperature sensor、Touch function VQFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)FT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB ConvertersLM1117MP-5.0
SOT-223Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTexas Instruments
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1K | Diode_SMD:D_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C5, C6, C7, C9, C11 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 4u7_16V | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I | C4, C10 |
| 2 | GREEN | LED_SMD:LED_0805_2012Metric | D2, D5 |
| 2 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J2, J4 |
| 2 | ~ | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | 0603 | Diode_SMD:D_0603_1608Metric | F1 |
| 1 | 16MHz | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | ATmega328-M | Package_DFN_QFN:HVQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm | U1 |
| 1 | DIODE | Diode_SMD:D_MicroSMP_AK | D3 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U3 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | LM1117MP-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J1 |
| 1 | YELLOW | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | ~ | Button_Switch_SMD:Panasonic_EVQPUK_EVQPUB | SW1 |
More from Amalthekkat/PCB-Portfolio
1- 2 layers38 × 30 mm

Similar boards
- 4 layers47.5 × 22 mm

Arduino nano
MaheshChowdaryDamuluri/Arduino-Nano-Project
Welcome to the official repository for the Custom Arduino Nano Hardware Clone project. This repository houses the full programmatic schematic blueprints, advanced multi-layer stackup routing configurations, and…
35 partsMIT - 4 layers45 × 19 mm

- 4 layers45.7 × 19.5 mm

Arduino Nano
Hirusha785/arduino-nano-kicad-design
⚙️ Arduino Nano-compatible development board designed in KiCad for the Mastering KiCad Specialization final project. Includes schematic, PCB layout, 3D renders, BOM, and fabrication-ready files for manufacturing. 🚀📐
35 parts - 2 layers120 × 120 mm

- 2 layers18 × 43.2 mm

- 2 layers56.5 × 61.5 mm

Arduino Nano
Rehmanchaudhary/custom-pcb-design
Custom Arduino Nano–compatible board — full schematic and PCB design in KiCad, physically etched and soldered
39 parts - 2 layers54 × 24.6 mm

Nano
riteshh27/arduino-nano-clone
KiCad project for an Arduino Nano clone (ATmega328P + FT232RL USB-serial)
33 parts - 4 layers44 × 18.4 mm

Arduino Nano
sebastiansebs/Arduino-Nano-from-Scratch
Custom-designed microcontroller development board based on the ATmega328P-M. The board integrates a USB-to-serial converter for programming and UART/SPI communication with comprehensive pin headers for flexible…
39 parts
Questions
How big is the Ard nano2 PCB?
It measures 51 × 19 mm and has 4 copper layers, 1.33 mm thick.
What parts does the Ard nano2 use?
35 parts, built around the ATMEGA328-MU, FT232RL and LM1117MP-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ard nano2 KiCad files?
From the Amalthekkat/PCB-Portfolio repository on GitHub, at the commit this page was made from: the board is nano clone kicad/ard_nano2.kicad_pcb and its schematic nano clone kicad/ard_nano2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ard nano2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Amalthekkat before reusing the design.