
Air detector
shm-dmitry/air-detector
Air status sensor with hass integration and fan control

Arduino UNO Clone PCB Design using KiCad
Arduino UNO Clone is an open-source printed circuit board by swapnil-maurya, from the swapnil-maurya/Arduino-UNO-Clone-PCB repository on GitHub. It is a 2-layer board of 68.5 × 53.4 mm with 52 parts on 58 nets, routed with 746 tracks and 72 vias.
It is built around the ATMEGA328-MU, CH340G and LM358ADR, with the AMS1117-3.3 among its other parts. Its parts include 14 capacitors, 10 connectors, 6 resistors, 5 ICs and 5 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Custom Arduino UNO compatible PCB designed using KiCad EDA.
This project contains the complete design of an Arduino UNO Clone PCB. The PCB was designed using KiCad, including schematic, PCB layout, 3D visualization, Gerber manufacturing files, BOM and mechanical DXF.
Contains the complete editable KiCad project:
.kicad_pro — Project file.kicad_sch — Schematic.kicad_pcb — PCB layoutContains PCB manufacturing files:
Contains the complete Bill of Materials:
Contains the DXF mechanical/board outline reference.
Contains project documentation and schematic/reference documents.
Contains PCB 3D view and other project images.
Gerber and drill files are included in the Gerber folder
for PCB manufacturing.
The BOM is available in CSV and Excel format.

This Arduino UNO Clone PCB can be used for:
Swapnil Maurya
Electronics & Communication Engineering (ECE)
This project is shared for educational and learning purposes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | PT1, R6, R7, R16, R17 |
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric | C11, C12, C13, C15 |
| 4 | C | Capacitor_SMD:C_0805_2012Metric | C1, C5, C6, C8 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14, R15 |
| 2 | 100N | Capacitor_SMD:C_0805_2012Metric | C14, C16 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 2 | 22PF | Capacitor_SMD:C_0805_2012Metric | C20, C21 |
| 2 | 47u 25V | Capacitor_SMD:CP_Elec_5x5.7 | C2, C3 |
| 1 | 12MHz | Crystal:Crystal_SMD_HC49-SD | Y2 |
| 1 | 16MHz | Crystal:Crystal_SMD_HC49-SD | Z1 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 3.3V POWER HEADER | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SC-59 | U3 |
| 1 | ANALOG_PIN | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | ATmega328-M | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U1 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | X1 |
| 1 | DC2.1MMX | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J11 |
| 1 | DIGITAL_PIN_1 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | DIGITAL_PIN_2 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J4 |
| 1 | I2C HEADER | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J10 |
| 1 | L | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | LM358ADR | Package_SO:JEITA_SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | M7 | Diode_SMD:D_SMA_Handsoldering | VD2 |
| 1 | M7 ISCP | Diode_SMD:D_SC-80 | D6 |
| 1 | NCP1117-5.0_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | ON | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | POWER | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_NO_E-Switch_TL3301NxxxxxG | S1 |
| 1 | RX | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | SI2301DS(A1SHB) | Package_TO_SOT_SMD:SC-59 | Q1 |
| 1 | TX | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | UART HEADER | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J8 |
The 51 most common of 52 parts.

shm-dmitry/air-detector
Air status sensor with hass integration and fan control



DeshmukhMalhar/sch2header
Scripts to auto-generate pin defination header from schematics

MaheshChowdaryDamuluri/Arduino-Nano-Project
Welcome to the official repository for the Custom Arduino Nano Hardware Clone project. This repository houses the full programmatic schematic blueprints, advanced multi-layer stackup routing configurations, and…



It measures 68.5 × 53.4 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the ATMEGA328-MU, CH340G, LM358ADR and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the swapnil-maurya/Arduino-UNO-Clone-PCB repository on GitHub, at the commit this page was made from: the board is KiCad/Arduino-UNO-Clone.kicad_pcb and its schematic KiCad/arduino_uno_img.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask swapnil-maurya before reusing the design.