2 layers86.4 × 53.3 mm
2 layers
A button
aspro648/KiCad33My design files. Abandon all hope ye who enter here.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 2
- Pads
- 7
- Tracks, vias
- 16, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
A button is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board with 3 parts on 2 nets, routed with 16 tracks and 0 vias.
Its parts include 2 connectors and 1 switch.
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | BUTTON | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.00mm | J27 |
| 1 | NPTH | Wire_Pads:SolderWirePad_single_2-5mmDrill | J14 |
| 1 | SW_Push | footprints:SW_PUSH_6mm | SW2 |
Questions
What parts does the A button use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the A button KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Nerf/Ardu RapidStrike/archive/design_files V02/a_button.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the A button design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.
More from aspro648/KiCad
12- 2 layers64 × 40 mm
- 2 layers86.4 × 53.3 mm
- 2 layers128 × 75 mm
- 2 layers128 × 75 mm
- 2 layers42 × 18 mm
- 2 layers80 × 38 mm
- 2 layers132 × 75 mm
- 2 layers42 × 18 mm
- 2 layers90 × 64 mm
- 2 layers69.8 × 12.5 mm
- 2 layers64.8 × 50.8 mm
Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT