

Design files V05
My design files. Abandon all hope ye who enter here.
- Size
- 132 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 59
- Pads
- 236
- Tracks, vias
- 666, 4
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files V05 is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 132 × 75 mm with 81 parts on 59 nets, routed with 666 tracks and 4 vias.
It is built around the ATMEGA328P-PU, L293D and 74LS14PC, with the IRLB8721PBF among its other parts. Its parts include 33 connectors, 17 resistors, 10 capacitors, 7 ICs and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)L293D
DIP-16-40℃~+150℃ 1.2A 2 4.5V~36V 4mA 600mA DIP-16 Brushed DC Motor Drivers ROHSSTMicroelectronicsStepper Motor Driver74LS14PC
PDIP-14InvertersTexas InstrumentsIRLB8721PBF
TO-220AB-55℃~+175℃ 1 N-channel 1.077nF 110pF 13nC@4.5V 16mΩ@4.5V 2.35V 30V 360pF 62A 65W N-Channel ±20V TO-220AB MOSFETs ROHSInfineon TechnologiesMOSFETs
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | footprints:R__P5.08mm | R1, R3, R4, R6, R10, R17, R19, R20 |
| 7 | 0.1uF | footprints:C_Disc_D3.4mm_W2.1mm_P2.50mm | C3, C5, C6, C7, C8, C9, C10 |
| 6 | NPTH | Wire_Pads:SolderWirePad_single_2-5mmDrill | J14, J14, J14, J14, J14, J14 |
| 4 | 1K | footprints:R__P5.08mm | R5, R7, R11, R18 |
| 3 | 1uF | footprints:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C4 |
| 3 | HALL SENSOR | footprints:Hall_Sensor | U3, U4, U6 |
| 2 | LOGO | footprints:RS_left | G***, G*** |
| 2 | PTC | footprints:Fuse_Littelfuse-LVR125 | F1, F2 |
| 1 | 100 | footprints:R__P5.08mm | R21 |
| 1 | 100K 1% | footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R8 |
| 1 | 10K | footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9 |
| 1 | 10K 1% | footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12 |
| 1 | 16Mhz | footprints:Resonator-3pin_w7.0mm_h2.5mm | Y1 |
| 1 | 1K | footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 1N5401 | footprints:D_DO-15_P12.70mm_Horizontal | D1 |
| 1 | 74LS14 | footprints:DIP-14_W7.62mm | U7 |
| 1 | A2 | footprints:Pin_Header_Straight_1x02_Pitch2.00mm | J11 |
| 1 | ATMEGA328P-PU | footprints:DIP-28_W7.62mm | U5 |
| 1 | BATT | footprints:TerminalBlock_bornier-2_P5.08mm | J15 |
| 1 | BATT_IN | footprints:TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | BATT_OUT | footprints:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | BUTTON | Connectors_Molex:Molex_PicoBlade_53048-0210_02x1.25mm_Angled | J21 |
| 1 | BUTTON | footprints:Pin_Header_Straight_1x02_Pitch2.00mm | J27 |
| 1 | CLIP | footprints:Molex_PicoBlade_53048-0210_02x1.25mm_Angled | J12 |
| 1 | D13 | footprints:LED_D3.0mm_Horizontal_O1.27mm_Z10.0mm | D2 |
| 1 | FLYWHEELS | Wire_Pads:SolderWirePad_single_2-5mmDrill | J13 |
| 1 | FRONT | footprints:Molex_PicoBlade_53048-0410_04x1.25mm_Angled | J8 |
| 1 | FTDI | footprints:Pin_Header_Angled_1x06_Pitch2.54mm | J7 |
| 1 | Fuse | footprints:BladeFuse-Mini_Keystone_3568 | F3 |
| 1 | I2C | footprints:Molex_PicoBlade_53048-0410_04x1.25mm_Angled | J5 |
| 1 | IRLB8721 | footprints:TO-252-2_hand_soldering | Q1 |
| 1 | IR_LED | footprints:Pin_Header_Straight_1x02_Pitch2.00mm | J26 |
| 1 | ISP | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | CON1 |
| 1 | JAM | footprints:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J4 |
| 1 | L293D | footprints:DIP-16_W7.62mm | U2 |
| 1 | LED | footprints:LED_D3.0mm | D3 |
| 1 | LOGO | footprints:RS_right | G*** |
| 1 | MCP1702 | footprints:TO-92_Inline_Narrow_Oval | U1 |
| 1 | MTRS | footprints:TerminalBlock_bornier-2_P5.08mm | J9 |
| 1 | NPTH | footprints:SolderWirePad_single_2-5mmDrill | J14 |
| 1 | PHOTO | footprints:Pin_Header_Straight_1x03_Pitch2.00mm | J25 |
| 1 | PSH_IN | footprints:Molex_PicoBlade_53047-0510_05x1.25mm_Straight | J17 |
| 1 | PSH_OUT | footprints:Molex_PicoBlade_53048-0510_05x1.25mm_Angled | J18 |
| 1 | PUSH | footprints:Pin_Header_Straight_2x01_Pitch2.00mm | J20 |
| 1 | PUSHER | footprints:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J3 |
| 1 | PWM | footprints:Pin_Header_Straight_1x01_Pitch2.00mm | J10 |
| 1 | Photo_NPN | footprints:LED_D3.0mm | Q2 |
| 1 | REV | footprints:Pin_Header_Straight_2x01_Pitch2.00mm | J6 |
| 1 | SW_Push | footprints:SW_PUSH_6mm | SW2 |
| 1 | Speaker | footprints:SPEAKER | LS1 |
| 1 | TO_IR | footprints:Pin_Header_Straight_1x02_Pitch2.00mm | J24 |
| 1 | TRIG | footprints:Pin_Header_Straight_2x01_Pitch2.00mm | J19 |
| 1 | TRIG_IN | footprints:Molex_PicoBlade_53048-0610_06x1.25mm_Angled | J23 |
| 1 | TRIG_OUT | footprints:Molex_PicoBlade_53048-0610_06x1.25mm_Angled | J22 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers99.8 × 99.8 mm

Vikings Robotics PCB
MrBruh/Vikings-Robotics-PCB
A board with 2 ATMEGA microprocessors for controlling up to 7 DC motors and 4 servos
261 parts1 - 4 layers99.1 × 99.1 mm

Bldc controller
aditelik/bldc_controller
Brushless DC Motor Controller PCB Design for EE 91a Fall 2019
184 parts - 4 layers104.3 × 120.8 mm

Testingg
AndrewCieslak/PersonalPowerSupply
My personal 20V in, 15-1.5 V out buck converter power supply code and schematics. Fully discrete, with almost no integrated components for the feedback loop.
115 partsMIT - 2 layers48 × 84 mm

- 2 layers

- 2 layers51.7 × 79.4 mm

Control motor dc
kr4fty/DCMotorController
Closed Loop Position Control for DC Servo Motors. STEP / DIR compatible Driver
26 parts5GPL-2.0 - 2 layers100 × 100 mm

Flipdot H Bridge
comakingspace/FlipDotDisplay
They were bought at the Makerfaire Hannover 2016.
76 parts3 - 2 layers82 × 81 mm

Questions
How big is the Design files V05 PCB?
It measures 132 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files V05 use?
81 parts, built around the ATMEGA328P-PU, L293D, 74LS14PC and IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files V05 KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Nerf/Ardu RapidStrike/design_files V05/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files V05 design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.