

Design files
My design files. Abandon all hope ye who enter here.
- Size
- 86.4 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 100
- Nets
- 56
- Pads
- 245
- Tracks, vias
- 644, 84
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 86.4 × 53.3 mm with 100 parts on 56 nets, routed with 644 tracks and 84 vias.
It is built around the ATMEGA328P-AU. Its parts include 64 diodes, 16 transistors, 8 resistors, 2 connectors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 64 | LED | footprints:LED_0805 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +48 |
| 16 | Q_NPN_BEC | footprints:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 8 | 100 | footprints:R_0805 | R1, R2, R3, R4, R5, R6, R7, R8 |
| 1 | ATMEGA328P-AU | footprints:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | AVR-ISP-6 | footprints:AVR-ISP-6 | CON1 |
| 1 | Battery_Cell | footprints:BATT_CR2032_SMD | BT1 |
| 1 | C | footprints:C_0805 | C1 |
| 1 | LOGO | footprints:Image_Cu | G*** |
| 1 | LOGO | footprints:Image_Mask | G*** |
| 1 | LOGO | footprints:Image_silk | G*** |
| 1 | MB225rev | myFootPrints:MB225rev | VAL |
| 1 | MadeInOregonRev25 | myFootPrints:MadeInOregonRev25 | VAL |
| 1 | Pin | footprints:SolderWirePad_single_SMD_5x10mm | J1 |
| 1 | SW_Push | footprints:SW_SMD_PUSH | SW2 |
| 1 | SW_SPDT | footprints:SPST_SMD | SW1 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers80 × 110 mm

NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0 - 2 layers50.5 × 128.5 mm

- 2 layers152 × 88 mm

RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222 - 2 layers50.2 × 31.2 mm

MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT - 2 layers34 × 46 mm

- 2 layers73 × 94 mm

Sportiduino base
sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino
119 parts78GPL-3.0 - 2 layers58.9 × 44.2 mm

OpenPSX2AmigaPadAdapter
SukkoPera/OpenPSX2AmigaPadAdapter
Playstation to Commodore Amiga/CD32 Controller Adapter
43 parts69 - 2 layers60 × 50 mm

Vx8 gps prototype v2.0
4x1md/vx8_gps
DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.
56 parts66MIT
Questions
How big is the Design files PCB?
It measures 86.4 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files use?
100 parts, built around the ATMEGA328P-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Badge/design_files/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.