

Base
My design files. Abandon all hope ye who enter here.
- Size
- 64 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 102
- Nets
- 9
- Pads
- 167
- Tracks, vias
- 242, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Base is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 64 × 40 mm with 102 parts on 9 nets, routed with 242 tracks and 4 vias.
It is built around the ATTINY85-15M. Its parts include 37 connectors, 3 transistors, 2 switches, 1 resistor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 1pin | myFootPrints:MOUSEBITEx3 | B3, B3, B3, B3, B3, B3, B3, B3, B3, B3, B3, B3, B3, B3, B3, B3 +7 |
| 17 | CONN_01X01 | myFootPrints:Lego_Drill | P3, P6, P6, P7, P7, P7, P7, P7, P7, P7, P7, P7, P7, P7, P10, P11 +1 |
| 16 | CONN_01X01 | myFootPrints:Lego_Pad | P0, P2, PBN1, PBN2, PG1, PLEDN1, PLEDP1, PNN1, PNP1, PP1, PSN1, PSP1, PSPN1, PSPP1, PTN1, PTP1 |
| 14 | 1pin | myFootPrints:MOUSEBITEx2 | B2, B2, B2, B2, B2, B2, B2, B2, B2, B2, B2, B2, B2, B2 |
| 8 | 1pin | myFootPrints:MOUSEBITEx1 | B, B, B, B, B, B, B, B |
| 8 | divot | myFootPrints:divot | DIVOT, DIVOT, DIVOT, DIVOT, DIVOT, DIVOT, DIVOT, DIVOT |
| 4 | CONN_01X01 | myFootPrints:Lego_Pad_half | P1, P4, PBP1, PBP2 |
| 2 | OPTO_NPN | myFootPrints:ARROW | Q1, Q1 |
| 1 | ATTINY85 | Housings_DIP:DIP-8_W7.62mm | IC1 |
| 1 | Battery | BATT_CR2032_SMD | BT1 |
| 1 | LED | LEDs:LED-5MM | D2 |
| 1 | LOGO | myFootPrints:BrownDog_6_BS | G*** |
| 1 | LOGO | myFootPrints:BrownDog_7_SM | G*** |
| 1 | OPTO_NPN | myFootPrints:PHOTO_TRANS | Q1 |
| 1 | R | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R2 |
| 1 | SPEAKER | myFootPrints:PS1240_piezo | SP1 |
| 1 | SPST | myFootPrints:SW_SPST | SW1 |
| 1 | TOUCH | myFootPrints:SW_PUSH_TOUCH | SW2 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers50 × 50 mm

T85-with driver and poe
cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs
41 parts133 - 2 layers23 × 45 mm

- 2 layers41.1 × 110.7 mm

- 2 layers

- 2 layers40 × 30 mm

Test board
Guiimartinho/routeai
LLM-Powered Electronic Design Automation Platform for PCB Design
4 parts13 - 2 layers78.3 × 78.5 mm

50x70 tiny
rallekralle11/Tinyreflow
Inspired by afterearthltd's reflow plate, but using fewer and simpler components.
23 parts10 - 2 layers

MIDIMonkey
aleh/MIDIMonkey
Listens to MIDI messages on one pin and triggers drums on the others
8 parts9MIT - 2 layers46.9 × 41.4 mm

Questions
How big is the Base PCB?
It measures 64 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Base use?
102 parts, built around the ATTINY85-15M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Base KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/LEGO/LEGO_Attiny/base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Base design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.