Skip to the content
2 layers150 × 90 mmDaisy MultiEffect Pedal, the printed circuit board in 3D

Daisy MultiEffect Pedal

AryamaanDash/MultiEffectPedal

Multi-Effect Guitar Pedal Code for Daisy Seed + PCB & Schematic Design

Size
150 × 90 mm
Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
20
Pads
97
Tracks, vias
93, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
12 Jul 2026
Updated
1 Sep 2026

Overview

Daisy MultiEffect Pedal is an open-source printed circuit board by AryamaanDash, from the AryamaanDash/MultiEffectPedal repository on GitHub. It is a 2-layer board of 150 × 90 mm with 24 parts on 20 nets, routed with 93 tracks and 0 vias.

It is built around the MCP6002-I/P and B10K. Its parts include 7 capacitors, 7 resistors, 2 ICs, 2 connectors and 1 switch. It belongs with the audio and music boards of this library.

Main components

2

README

README.md

MultiEffectPedal

Description

Multi-effect guitar pedal firmware and a custom KiCad PCB for the Daisy Seed. The firmware runs distortion, stereo reverb, delay, and flanger effects at the Daisy audio sample rate, with a footswitch for cycling through the effects.

Firmware architecture

text
src/main.cpp             Hardware composition and application entry point
src/AudioEngine.cpp      Real-time block processing and output limiting
src/EffectManager.cpp    Effect ownership-independent routing and mode changes
src/PedalControls.cpp    Foreground switch scanning and LED state
src/effects/             Individual DSP effect adapters
include/                 Public interfaces and shared audio types

Every effect implements the EffectProcessor interface:

cpp
virtual void Init(float sample_rate) = 0;
virtual void SetParameters(const EffectParameters& parameters) = 0;
virtual StereoFrame Process(float input) = 0;

Effect parameters use normalized values from 0 to 1. Each adapter maps those values to the range expected by its DaisySP processor. Mode changes are sent from the foreground loop through an atomic request and applied by the audio engine at the next block boundary.

The reverb and one-second delay buffers remain in external SDRAM. Effect objects and the manager are statically allocated; audio processing performs no dynamic allocation.

Building

This project expects libDaisy and DaisySP to be available at the paths in the Makefile.

sh
make

To add an effect, implement EffectProcessor, register the instance with EffectManager, and add its source file to CPP_SOURCES in the Makefile.

Tools

  • Daisy Seed and libDaisy
  • DaisySP and DaisySP-LGPL
  • KiCad PCB and schematic design

Parts

24
QtyValueFootprintReferences
4B10KCustom:Pot_3Pin_B10K_WiredRV1, RV2, RV3, RV4
1100RCustom:TH_2Pin_7p62R4
1100R out isoCustom:TH_2Pin_7p62R6
1100k VREF bottomCustom:TH_2Pin_7p62R2
1100k VREF topCustom:TH_2Pin_7p62R1
1100k out biasCustom:TH_2Pin_7p62R5
1100k output pulldownCustom:TH_2Pin_7p62R7
1100nF MCP6002 decoupleCustom:TH_2Pin_7p62C3
1100nF VREFCustom:TH_2Pin_7p62C2
110uF VREFCustom:TH_2Pin_7p62C1
110uF output couplingCustom:TH_2Pin_7p62C7
11M input biasCustom:TH_2Pin_7p62R3
11uF from Daisy OutCustom:TH_2Pin_7p62C6
11uF input couplingCustom:TH_2Pin_7p62C4
11uF to Daisy InCustom:TH_2Pin_7p62C5
1B10K volumeCustom:Pot_3Pin_B10K_WiredRV5
1Daisy Seed socket / 2x20Custom:Daisy_Seed_2x20_SocketU2
1INPUT_TS_JACKCustom:Jack_or_Switch_2PinJ1
1MCP6002-I/PPackage_DIP:DIP-8_W7.62mmU1
1MOMENTARY_MODE_SWITCHCustom:Jack_or_Switch_2PinSW1
1OUTPUT_TS_JACKCustom:Jack_or_Switch_2PinJ2

Similar boards

  • 2 layers65.3 × 100 mmMutant SMD, the printed circuit board in 3D

    Mutant SMD

    soggybag/Mutant-SMD

    A redesign of the Mutant generative synth (MeeBleeps, https://github.com/Meebleeps/MeeBleeps-Mutant-Synth), based on the Eurorack version in /Documents/Arduino/projects/MutantGenerativeArduinoSynth/ (Instructables…

    49 parts
  • 2 layers90 × 110 mmWolkje, the printed circuit board in 3D

    Wolkje

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    136 parts13
  • 2 layers124 × 112 mmOpenDropV3, the printed circuit board in 3D

    OpenDropV3

    GaudiLabs/OpenDrop

    Open Source Digital Microfluidics Bio Lab

    318 parts492GPL-3.0
  • 2 layers144 × 80 mmDVDLaserScanner, the printed circuit board in 3D

    DVDLaserScanner

    GaudiLabs/OpenLaserScanningMicroscope

    Open Source Laser Scanning Microscope

    83 parts345GPL-3.0
  • 2 layers50.8 × 107.9 mmAnalog rev3, the printed circuit board in 3D

    Analog rev3

    PaulStoffregen/O_C_T41

    Ornament and Crime Optimized With Teensy 4.1

    202 parts164
  • 4 layers60 × 95 mmSTM32H7 GuitarPedal, the printed circuit board in 3D

    STM32H7 GuitarPedal

    GuitarML/GuitarPedalSTM32

    Guitar pedal using a stm32h7 microcontroller programmed with CubeIDE (PCB and Firmware)

    101 parts100MIT
  • 2 layers72.4 × 91.4 mmPedal pi Robin, the printed circuit board in 3D

    Pedal pi Robin

    thawney/PedalPiV2

    Pedal Pi V2 by Thawney is an all new and regularly maintained Pedal-Pi by electrosmash; a lo-fi programmable guitar pedal that works with the Raspberry Pi ZERO Board.

    54 parts45GPL-3.0
  • 2 layers97 × 77.5 mmESPlant, the printed circuit board in 3D

    ESPlant

    CCHS-Melbourne/ESPlant

    Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266

    77 parts37

Questions

How big is the Daisy MultiEffect Pedal PCB?

It measures 150 × 90 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Daisy MultiEffect Pedal use?

24 parts, built around the MCP6002-I/P and B10K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Daisy MultiEffect Pedal KiCad files?

From the AryamaanDash/MultiEffectPedal repository on GitHub, at the commit this page was made from: the board is Daisy_MultiEffect_Pedal_KiCad_Starter/Daisy_MultiEffect_Pedal.kicad_pcb and its schematic Daisy_MultiEffect_Pedal_KiCad_Starter/Daisy_MultiEffect_Pedal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Daisy MultiEffect Pedal design in my own project?

Its repository states no licence, so its author keeps all rights: ask AryamaanDash before reusing the design.