Skip to the content
2 layers29.4 × 29.4 mmPower base, the printed circuit board in 3D

Power base

anuejn/2d542

reverse engineering the canon 5D mark II (5D2) image sensor

Size
29.4 × 29.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
22
Pads
88
Tracks, vias
156, 44
Pours
4
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
19 Oct 2023
Updated
27 May 2025

Overview

Power base is an open-source printed circuit board by anuejn, from the anuejn/2d5 repository on GitHub. It is a 2-layer board of 29.4 × 29.4 mm with 28 parts on 22 nets, routed with 156 tracks and 44 vias.

It is built around the TYPE-C 16PIN 2MD(073), SS34 and SMMS0630-100M. Its parts include 9 capacitors, 8 resistors, 4 connectors, 3 diodes and 2 ICs. It belongs with the sensors and measurement boards of this library.

Main components

3

README

boards/zynq-test-board/README.md

zynq test board

This board is a "cape" for the z-turn litezynq SBC and should serve as a development basis for interfacing the sensor. It features an HMCAD1511TR as ADC and appropriate power-supplies. Otherwise it does very little.

Parts

28
QtyValueFootprintReferences
410uCapacitor_SMD:C_0603_1608MetricC1, C6, C7, C8
3D_SchottkyDiode_SMD:D_SMAD1, D2, D3
20.1uCapacitor_SMD:C_0603_1608MetricC3, C4
21uCapacitor_SMD:C_0603_1608MetricC2, C9
25.1kResistor_SMD:R_0603_1608MetricR1, R2
2Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3, J4
1100pCapacitor_SMD:C_0603_1608MetricC5
110kResistor_SMD:R_0603_1608MetricR8
110ufootprint:IND-SMD_L7.3-W6.6L1
11RResistor_SMD:R_0805_2012MetricR6
12.55kResistor_SMD:R_0603_1608MetricR5
139kResistor_SMD:R_0603_1608MetricR7
140kResistor_SMD:R_0603_1608MetricR4
14k7Resistor_SMD:R_0603_1608MetricR3
1Conn_01x02_SocketConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_HorizontalJ1
1Conn_01x03_SocketConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_HorizontalJ2
1LOGO2d5:plugG***
1TPS55340PWPR2d5:PWP14U1
1TYPE-C_16PIN_2MD(073)footprint:USB-C-SMD_TYPE-C-6PIN-2MD-073U2

More from anuejn/2d5

7
  • 4 layers94 × 94 mmZynq test board, the printed circuit board in 3D

    Zynq test board

    anuejn/2d5

    reverse engineering the canon 5D mark II (5D2) image sensor

    206 parts42
  • 2 layersCarrier tracing, the printed circuit board in 3D

    Carrier tracing

    anuejn/2d5

    reverse engineering the canon 5D mark II (5D2) image sensor

    61 parts42
  • 2 layers34.4 × 38.1 mmHmcad1511 pmod, the printed circuit board in 3D

    Hmcad1511 pmod

    anuejn/2d5

    reverse engineering the canon 5D mark II (5D2) image sensor

    30 parts42
  • 2 layers100 × 100 mm5d2 pmod, the printed circuit board in 3D

    5d2 pmod

    anuejn/2d5

    reverse engineering the canon 5D mark II (5D2) image sensor

    25 parts42
  • 2 layers48.3 × 17.5 mmPower leg negative, the printed circuit board in 3D

    Power leg negative

    anuejn/2d5

    reverse engineering the canon 5D mark II (5D2) image sensor

    17 parts42
  • 2 layers48.3 × 17 mmPower leg positive, the printed circuit board in 3D

    Power leg positive

    anuejn/2d5

    reverse engineering the canon 5D mark II (5D2) image sensor

    17 parts42
  • 2 layers11.9 × 64.3 mmConnector breakout, the printed circuit board in 3D

    Connector breakout

    anuejn/2d5

    reverse engineering the canon 5D mark II (5D2) image sensor

    2 parts42

Similar boards

  • 4 layers100 × 68 mmDevKit, the printed circuit board in 3D

    DevKit

    kaminaris/GigaESC

    209 parts47
  • 2 layers251.6 × 177.8 mmMelbourneTrainTracker, the printed circuit board in 3D

    MelbourneTrainTracker

    itsmevjnk/MelbourneTrainTracker

    Melbourne Train Tracker project repository (SIT210, T1/2025)

    1,071 parts40
  • 2 layers79 × 30 mmLIA, the printed circuit board in 3D

    LIA

    JGAguado/LIA

    Low-power pet tracking platform built around Meshtastic and LoRa mesh networking

    81 parts29
  • 4 layers155 × 103 mmMEMLNaut 0 3, the printed circuit board in 3D

    MEMLNaut 0 3

    MusicallyEmbodiedML/MEMLNaut

    138 parts6
  • 4 layers50.1 × 85.2 mmLIONv3, the printed circuit board in 3D

    LIONv3

    RodrigoCAndrade/LIONv3-R

    The LIONv3-R is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.

    89 parts4
  • 2 layersLED CUBE PCB, the printed circuit board in 3D

    LED CUBE PCB

    ladyM9/Led_cube

    LED CUBE based on STM32F103C8T6 (Blue-Pill)

    53 parts2
  • 4 layers50.2 × 40.2 mmLIONv3, the printed circuit board in 3D

    LIONv3

    RodrigoCAndrade/LIONv3-Mini

    The LIONv3-Mini is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.

    88 parts2
  • 4 layers30 × 51 mmCore, the printed circuit board in 3D

    Core

    Zhang-JK/Fragaria-Cake

    A linux development board based on allwinner F1C200s

    97 parts2

Questions

How big is the Power base PCB?

It measures 29.4 × 29.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Power base use?

28 parts, built around the TYPE-C 16PIN 2MD(073), SS34 and SMMS0630-100M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Power base KiCad files?

From the anuejn/2d5 repository on GitHub, at the commit this page was made from: the board is boards/hedgehog/power_base/power_base.kicad_pcb and its schematic boards/connector_breakout/connector_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Power base design in my own project?

Its repository states no licence, so its author keeps all rights: ask anuejn before reusing the design.