2 layers90 × 100 mm
4 layers38.5 × 19.5 mm
CameraPosition
Andy-Cheng1017/LEDCelilingNTUT IXD Graduate Exhibition
- Size
- 38.5 × 19.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 88
- Pads
- 307
- Tracks, vias
- 349, 69
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 22 Sep 2022
- Updated
- 15 Jun 2023
Overview
CameraPosition is an open-source printed circuit board by Andy-Cheng1017, from the Andy-Cheng1017/LEDCeliling repository on GitHub. It is a 4-layer board of 38.5 × 19.5 mm with 75 parts on 88 nets, routed with 349 tracks and 69 vias.
It is built around the ESP32-S3-WROOM-1-N8, AMS1117 and IP5306, with the XC6206P122MR, XC6206P282MR and WS2812B among its other parts. Its parts include 22 capacitors, 21 diodes, 13 resistors, 6 ICs and 3 transistors. It belongs with the ESP32 boards of this library.
Main components
6
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117
1.0 A Low-Dropout Fixed RegulatorAdvanced Monolithic SystemsUncategorised
IP5306
ESOP-80℃~+70℃ 1 100uA 2.1A 3V 4.2V 4.65V~5.5V Charging IC、Protection IC I2C Lithium Battery ESOP-8 Battery Management ROHSINJOINICBattery Management
XC6206P122MR
SOT-23SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
XC6206P282MR
SOT-23-3L-40℃~+85℃ 1 150mV@(100mA) 1uA 2.8V 200mA 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdLEDCeliling
NTUT IXD Graduate Exhibition
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21 +4 |
| 8 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C6, C7, C9, C10, C13, C20 |
| 7 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C5, C12, C15, C16, C17, C19, C22 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R6, R7, R10, R13 |
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric | C3, C4, C18, C21 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric | R5, R11, R12 |
| 3 | TestPoint_2Pole | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | TP1, TP2, TP3 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C8, C11 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1, SW2 |
| 1 | 0.5 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 15p | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 1n | Inductor_SMD:L_Wuerth_MAPI-2512 | L1 |
| 1 | 2 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 22 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 5.1K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Battery_Cell | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Conn_01x25 | 1Use:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J2 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1U | U6 |
| 1 | GC9A01_IPS_display_SPI | 1Use:GC9A01_IPS_display | U5 |
| 1 | IP5306 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LOGO | 1Use:Hockey | G*** |
| 1 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | USB_C_Receptacle_USB2.0 | 1Use:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XC6206P122MR | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | XC6206P282MR | Package_TO_SOT_SMD:SOT-23 | U4 |
More from Andy-Cheng1017/LEDCeliling
8- 2 layers100 × 100 mm
- 2 layers86 × 78 mm
- 2 layers90 × 25 mm
- 2 layers82.5 × 81 mm
- 2 layers43 × 39 mm
- 2 layers16.5 × 27 mm
- 2 layers10 × 10 mm
Similar boards
- 4 layers68.1 × 75 mm
- 2 layers95 × 48 mm
Primis FaceTracker
Nieko27/Frame-Workshop
A repo for all things steam frame hardware.
50 parts93CERN-OHL-S-2.0 - 4 layers66 × 44 mm
- 4 layers49.8 × 47.3 mm
- 2 layers64.4 × 38.9 mm
ESPCameleon
Alan-GIRAUDON/ESPCameleon
ESPCameleon is an ESP32 Camera PCB. It takes most of its design from the AI Thinker ESP32-Cam and adapt it to use the ESP32-S2-MINI-2-N4R2. This board allow video capture and streaming through WiFi or USB.
45 partsMIT - 2 layers63.2 × 27.7 mm
ESPCameleonV2
Alan-GIRAUDON/ESPCameleonV2
ESPCameleonV2 is an ESP32 Camera PCB. It resolve the biggest issues of its first version, ESP32Cameleon. This board allow video capture and streaming through WiFi or USB.
47 partsMIT - 4 layers60 × 85 mm
Esp32s3-camera
LCQIANN/esp32s3-camera
ESP32-S3 camera board v1.2: OV2640 DVP camera, microSD, USB-C, LiPo, KiCad 10 project for JLCPCB PCBA
64 parts - 2 layers27 × 27 mm
Questions
How big is the CameraPosition PCB?
It measures 38.5 × 19.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the CameraPosition use?
75 parts, built around the ESP32-S3-WROOM-1-N8, AMS1117, IP5306 and XC6206P122MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CameraPosition KiCad files?
From the Andy-Cheng1017/LEDCeliling repository on GitHub, at the commit this page was made from: the board is CameraPosition/CameraPosition.kicad_pcb and its schematic BoardCoverter/BoardCoverter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CameraPosition design in my own project?
Its repository states no licence, so its author keeps all rights: ask Andy-Cheng1017 before reusing the design.