

Led Control Circuit
NTUT IXD Graduate Exhibition
- Size
- 43 × 39 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 57
- Pads
- 164
- Tracks, vias
- 213, 63
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 22 Sep 2022
- Updated
- 15 Jun 2023
Overview
Led Control Circuit is an open-source printed circuit board by Andy-Cheng1017, from the Andy-Cheng1017/LEDCeliling repository on GitHub. It is a 2-layer board of 43 × 39 mm with 27 parts on 57 nets, routed with 213 tracks and 63 vias.
It is built around the 74LVC125AD, ESP32-S3-WROOM-1-N8 and TF-01A, with the AMS1117-3.3 and 1N5819HW among its other parts. Its parts include 7 capacitors, 7 resistors, 3 ICs, 3 diodes and 3 connectors. It belongs with the ESP32 boards of this library.
Main components
574LVC125AD
SOP-14L-40℃~+125℃ 1 1.65V~5.5V 2.6ns@5V,15pF 4 40uA 50mA 50mA 74LVC Schmitt trigger Tri-State Unidirectional SOP-14L Buffers, Drivers, Receivers, Transceivers ROHSMDDBuffers, Drivers, Receivers, TransceiversESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesTF-01A
SMD1.85mm Connector and Ejector MicroSD Card (TF Card) Push-Push With Locating Pins SMD SD Card / Memory Card Connector ROHSHRO ElectronicsSD Card / Memory Card ConnectorAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1N5819HW
SOD-123-65℃~+150℃ 1 Independent 1A 1mA@40V 25A 40V 450mV@1A SOD-123 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdLEDCeliling
NTUT IXD Graduate Exhibition
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric | C2, C3, C5, C6 |
| 4 | 3.3K | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R7 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C7 |
| 2 | 1N5819HW | Diode_SMD:D_SOD-123 | D1, D3 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 5.1K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 74LVC125 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x02 | 1Comment:Battery | J2 |
| 1 | Conn_01x20 | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical_SMD | J3 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1U | U3 |
| 1 | LED0805 | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | LOGO | 1Comment:Hockey | G*** |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | TF-01A | SDCard:TF-SMD_TF-01A | Card1 |
| 1 | TestPoint_2Pole | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | TP1 |
| 1 | USB_C_Receptacle_USB2.0 | 1Comment:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
More from Andy-Cheng1017/LEDCeliling
8- 2 layers90 × 100 mm

- 2 layers100 × 100 mm

- 2 layers86 × 78 mm

- 4 layers38.5 × 19.5 mm

- 2 layers90 × 25 mm

- 2 layers82.5 × 81 mm

- 2 layers16.5 × 27 mm

- 2 layers10 × 10 mm

Similar boards
- 2 layers133 × 123 mm

- 2 layers50.8 × 27.9 mm

ESP32-S3 Custom
Macquarie-Aerospace-Rover-Society/ESP32-S3-PCB
This repo is for custom ESP32-S3 WROOM devkits, the plan is to add a ov5640 / ov2640 along with an SD card. Then use JLCPCB color printing to produce a colorful board that is also fit for MARS needs.
11 partsMIT - 4 layers66 × 71 mm

- 2 layers151.9 × 127.2 mm

Jayson's IOT Hub
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
47 parts915 - 4 layers50 × 50 mm

Carrier board
AntonioTRT/TRT_HW
La Carrier Board STM32G474 es una plataforma de desarrollo modular de alto rendimiento basada en el microcontrolador ARM Cortex-M4F STM32G474RET6 (LQFP-64, hasta 170 MHz con FPU y DSP).
54 parts - 4 layers86 × 86 mm

Power Supply ZensatV3
zenitheesc/ZenSat-V3-EPS
Repositório para o desenvolvimento do sistema de EPS do CubeSat ZenSat V3
132 partsMIT - 2 layers40.3 × 75.7 mm

- 2 layers29.5 × 22 mm

CE Makerverse MicroSD Card Adapter
CoreElectronics/CE-Makerverse-MicroSD-Card-Adapter
This is the repo for the Core Electronics Makerverse™ MicroSD Card Adapter.
31 parts5
Questions
How big is the Led Control Circuit PCB?
It measures 43 × 39 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Led Control Circuit use?
27 parts, built around the 74LVC125AD, ESP32-S3-WROOM-1-N8, TF-01A and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led Control Circuit KiCad files?
From the Andy-Cheng1017/LEDCeliling repository on GitHub, at the commit this page was made from: the board is Led_Control_Circuit/Led_Control_Circuit.kicad_pcb and its schematic BoardCoverter/BoardCoverter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led Control Circuit design in my own project?
Its repository states no licence, so its author keeps all rights: ask Andy-Cheng1017 before reusing the design.