2 layers90 × 100 mm
2 layers86 × 78 mm
Led Control Circuit Panelization
Andy-Cheng1017/LEDCelilingNTUT IXD Graduate Exhibition
- Size
- 86 × 78 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 108
- Nets
- 57
- Pads
- 656
- Tracks, vias
- 852, 252
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 22 Sep 2022
- Updated
- 15 Jun 2023
Overview
Led Control Circuit Panelization is an open-source printed circuit board by Andy-Cheng1017, from the Andy-Cheng1017/LEDCeliling repository on GitHub. It is a 2-layer board of 86 × 78 mm with 108 parts on 57 nets, routed with 852 tracks and 252 vias.
It is built around the 74LVC125AD, ESP32-S3-WROOM-1-N8 and TF-01A, with the AMS1117-3.3 and 1N5819HW among its other parts. Its parts include 28 capacitors, 28 resistors, 12 ICs, 12 diodes and 12 connectors. It belongs with the ESP32 boards of this library.
Main components
5
74LVC125AD
SOP-14L-40℃~+125℃ 1 1.65V~5.5V 2.6ns@5V,15pF 4 40uA 50mA 50mA 74LVC Schmitt trigger Tri-State Unidirectional SOP-14L Buffers, Drivers, Receivers, Transceivers ROHSMDDBuffers, Drivers, Receivers, Transceivers
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
TF-01A
SMD1.85mm Connector and Ejector MicroSD Card (TF Card) Push-Push With Locating Pins SMD SD Card / Memory Card Connector ROHSHRO ElectronicsSD Card / Memory Card Connector
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
1N5819HW
SOD-123-65℃~+150℃ 1 Independent 1A 1mA@40V 25A 40V 450mV@1A SOD-123 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdLEDCeliling
NTUT IXD Graduate Exhibition
Parts
108| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1u | Capacitor_SMD:C_0805_2012Metric | C2, C3, C5, C6, C9, C10, C12, C13, C16, C17, C19, C20, C23, C24, C26, C27 |
| 16 | 3.3K | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R7, R11, R12, R13, R14, R18, R19, R20, R21, R25, R26, R27, R28 |
| 8 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C7, C8, C14, C15, C21, C22, C28 |
| 8 | 1N5819HW | Diode_SMD:D_SOD-123 | D1, D3, D4, D6, D7, D9, D10, D12 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C4, C11, C18, C25 |
| 4 | 1K | Resistor_SMD:R_0805_2012Metric | R3, R10, R17, R24 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R2, R9, R16, R23 |
| 4 | 5.1K | Resistor_SMD:R_0805_2012Metric | R1, R8, R15, R22 |
| 4 | 74LVC125 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1, U4, U7, U10 |
| 4 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2, U5, U8, U11 |
| 4 | Conn_01x02 | 1Comment:Battery | J2, J5, J8, J11 |
| 4 | Conn_01x20 | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical_SMD | J3, J6, J9, J12 |
| 4 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1U | U3, U6, U9, U12 |
| 4 | LED0805 | LED_SMD:LED_0805_2012Metric | D2, D5, D8, D11 |
| 4 | LOGO | 1Comment:Hockey | G***, G***1, G***2, G***3 |
| 4 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1, SW2, SW3, SW4 |
| 4 | TF-01A | SDCard:TF-SMD_TF-01A | Card1, Card2, Card3, Card4 |
| 4 | TestPoint_2Pole | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | TP1, TP2, TP3, TP4 |
| 4 | USB_C_Receptacle_USB2.0 | 1Comment:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1, J4, J7, J10 |
More from Andy-Cheng1017/LEDCeliling
8- 2 layers100 × 100 mm
- 4 layers38.5 × 19.5 mm
- 2 layers90 × 25 mm
- 2 layers82.5 × 81 mm
- 2 layers43 × 39 mm
- 2 layers16.5 × 27 mm
- 2 layers10 × 10 mm
Similar boards
- 2 layers133 × 123 mm
- 2 layers50.8 × 27.9 mm
ESP32-S3 Custom
Macquarie-Aerospace-Rover-Society/ESP32-S3-PCB
This repo is for custom ESP32-S3 WROOM devkits, the plan is to add a ov5640 / ov2640 along with an SD card. Then use JLCPCB color printing to produce a colorful board that is also fit for MARS needs.
11 partsMIT - 4 layers66 × 71 mm
- 2 layers151.9 × 127.2 mm
Jayson's IOT Hub
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
47 parts915 - 4 layers50 × 50 mm
Carrier board
AntonioTRT/TRT_HW
La Carrier Board STM32G474 es una plataforma de desarrollo modular de alto rendimiento basada en el microcontrolador ARM Cortex-M4F STM32G474RET6 (LQFP-64, hasta 170 MHz con FPU y DSP).
54 parts - 4 layers86 × 86 mm
Power Supply ZensatV3
zenitheesc/ZenSat-V3-EPS
Repositório para o desenvolvimento do sistema de EPS do CubeSat ZenSat V3
132 partsMIT - 2 layers40.3 × 75.7 mm
- 2 layers29.5 × 22 mm
CE Makerverse MicroSD Card Adapter
CoreElectronics/CE-Makerverse-MicroSD-Card-Adapter
This is the repo for the Core Electronics Makerverse™ MicroSD Card Adapter.
31 parts5
Questions
How big is the Led Control Circuit Panelization PCB?
It measures 86 × 78 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Led Control Circuit Panelization use?
108 parts, built around the 74LVC125AD, ESP32-S3-WROOM-1-N8, TF-01A and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led Control Circuit Panelization KiCad files?
From the Andy-Cheng1017/LEDCeliling repository on GitHub, at the commit this page was made from: the board is Led_Control_Circuit/Led_Control_Circuit_Panelization.kicad_pcb and its schematic BoardCoverter/BoardCoverter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led Control Circuit Panelization design in my own project?
Its repository states no licence, so its author keeps all rights: ask Andy-Cheng1017 before reusing the design.