Skip to the content
2 layers63.2 × 27.7 mmESPCameleonV2, the printed circuit board in 3D

ESPCameleonV2 is an ESP32 Camera PCB. It resolve the biggest issues of its first version, ESP32Cameleon. This board allow video capture and streaming through WiFi or USB.

Size
63.2 × 27.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
47
Nets
54
Pads
215
Tracks, vias
564, 120
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
1 Dec 2024
Updated
4 Dec 2024

Overview

ESPCameleonV2 is an open-source printed circuit board by Alan-GIRAUDON, from the Alan-GIRAUDON/ESPCameleonV2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 63.2 × 27.7 mm with 47 parts on 54 nets, routed with 564 tracks and 120 vias.

It is built around the ESP32-S2-MINI-2-N4R2, AMS1117-3.3 and APS6404L-3SQR-SN, with the XC6206P122MR, XC6206P282MR and MDD2301 among its other parts. Its parts include 16 capacitors, 10 resistors, 6 connectors, 5 ICs and 3 diodes. It belongs with the ESP32 boards of this library.

Main components

6

README

README.md

ESPCameleonV2

Summary of the project

ESPCameleonV2 is an ESP32 Camera PCB. It resolve the biggest issues of its first version, ESP32Cameleon. This board allow video capture and streaming through WiFi or USB.

Schematics

schematics

Features

  • Micro-USB connector to directly program and power the board
  • LDO converters, 3V3 for the ESP32, SD card and LED's, 1V2 and 2V8 for the camera
  • RESET plated hole to reset the ESP32 and BOOT plated hole to activate the ESP32 USB boot mode
  • FPC connector 24 pins for the camera (tested OV2640, should support OV5640 despite voltage difference)
  • Micro-SD card reader to store videos
  • White and yellow LED's for debugging and status indicating, red power LED
  • Pin header to expose the ESP32 UART interface, the 3V3 rails and GND
  • External 8MB PSRAM

Differences with ESPCameleon

  • Added external PSRAM, from 4MB internal PSRAM to 8MB external PSRAM
  • Remapped the camera pins to increase the number of parallel lines from 7 to 9
  • Removed the additional GPIOS on the header to gain space
  • Remapped the SD card to not interfere with the PSRAM
  • Replaced the BOOT and RESET button with plated holes to save space
  • Removed 1 mounting hole to save space
  • Reduced the board size to put the antenna out of the board
  • Reorganized traces and components to fit the reduced area
  • Updated the silkscreen

PCB caracteristics

The PCB is a two layer board with single-sided assembly, the thinnest trace is 0.1562 mm and the vias have a 0.7 mm diameter ring and a 0.3 mm hole. The USB traces are as short and as thick as possible to be as close as possible to the 90 $\Omega$ impedance of the JLCPCB two-layer board stackup.

Board results :

Currently, the board hasn't been produced and rested.

Programming

The board can be "easily" programmed with both ESP-IDF and Arduino IDE but the later is much faster to get working.

For the arduino IDE, you just need to download the ESP32 boards configurations. Select board "ESP32S2 Dev module", enable "USB CDC on boot", "upload mode" as "internal USB". For the camera webserver example (File->Example->ESP32->Camera->CameraWebServer), you should set "PSRAM" as "enabled", enter your Wifi credentials and update the camera_pins.h to match the board (an example is given in my CameraWebServer2 repository).

An example of streaming through the USB port is available in the USBCameraStreaming repository. It contains an Arduino script to send JPEG images via USB and a Basic Flutter android app to receive and display the video stream.

Current Issues and TO DO list

  • The board needs to be tested to identify possibles issues
  • By default, ESP32S2 modules uses SPI pins that aren't exposed to link the PSRAM, whether it is functional with other pins remain to be tested.

Parts

47
QtyValueFootprintReferences
610uCapacitor_SMD:C_0402_1005MetricC2, C4, C6, C7, C8, C10
5100nCapacitor_SMD:C_0402_1005MetricC3, C9, C11, C13, C15
510kResistor_SMD:R_0402_1005MetricR1, R3, R5, R8, R10
51kResistor_SMD:R_0402_1005MetricR2, R4, R6, R7, R9
31uCapacitor_SMD:C_0603_1608MetricC1, C14, C16
3LOGOLOGOG***, G***, G***
3MountingHoleMountingHole:MountingHole_2.2mm_M2_ISO7380H1, H2, H3
2Conn_01x01Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_VerticalJ4, J6
1100uCapacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-BC5
115pCapacitor_SMD:C_0402_1005MetricC12
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1APS6404L-3SQR-SNPackage_SO:SOP-8_3.9x4.9mm_P1.27mmU5
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5
1Conn_01x26ESPCameleon:AFC01_S24FCA_00J3
1ESP32_S2_MINI_2_N4ESPCameleon:ESP32-S2-MINI-2U4
1LEDRLED_SMD:LED_0603_1608MetricD1
1LEDWLED_SMD:LED_0603_1608MetricD2
1LEDYLED_SMD:LED_0603_1608MetricD3
1MDD2301Package_TO_SOT_SMD:SOT-23Q1
1Micro_SD_CardESPCameleon:GCT_MEM2075-00-140-01-AJ2
1USB_B_MicroConnector_USB:USB_Micro-B_XKB_U254-051T-4BH83-F1SJ1
1XC6206P122MRPackage_TO_SOT_SMD:SOT-23-3U3
1XC6206P282MRPackage_TO_SOT_SMD:SOT-23-3U1

Similar boards

  • 2 layers64.4 × 38.9 mmESPCameleon, the printed circuit board in 3D

    ESPCameleon

    Alan-GIRAUDON/ESPCameleon

    ESPCameleon is an ESP32 Camera PCB. It takes most of its design from the AI Thinker ESP32-Cam and adapt it to use the ESP32-S2-MINI-2-N4R2. This board allow video capture and streaming through WiFi or USB.

    45 partsMIT
  • 4 layers68.1 × 75 mmHomefire, the printed circuit board in 3D

    Homefire

    JhanqueliX/Smart-light-socket-for-fire-prevention

    117 parts1
  • 2 layers95 × 48 mmPrimis FaceTracker, the printed circuit board in 3D

    Primis FaceTracker

    Nieko27/Frame-Workshop

    A repo for all things steam frame hardware.

    50 parts93CERN-OHL-S-2.0
  • 4 layers49.8 × 47.3 mmSoft robot cam, the printed circuit board in 3D

    Soft robot cam

    esb8/Soft-Robotics

    Custom PCB for soft robotic applications

    101 parts4
  • 4 layers60 × 85 mmEsp32s3-camera, the printed circuit board in 3D

    Esp32s3-camera

    LCQIANN/esp32s3-camera

    ESP32-S3 camera board v1.2: OV2640 DVP camera, microSD, USB-C, LiPo, KiCad 10 project for JLCPCB PCBA

    64 parts
  • 4 layers38.5 × 19.5 mmCameraPosition, the printed circuit board in 3D

    CameraPosition

    Andy-Cheng1017/LEDCeliling

    NTUT IXD Graduate Exhibition

    75 parts

Questions

How big is the ESPCameleonV2 PCB?

It measures 63.2 × 27.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESPCameleonV2 use?

47 parts, built around the ESP32-S2-MINI-2-N4R2, AMS1117-3.3, APS6404L-3SQR-SN and XC6206P122MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESPCameleonV2 KiCad files?

From the Alan-GIRAUDON/ESPCameleonV2 repository on GitHub, at the commit this page was made from: the board is ESPCameleonV2.kicad_pcb and its schematic ESPCameleonV2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESPCameleonV2 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).