2 layers
HardwareFiles
andresR8/Robotics4Control
A mini-sized robot for investigation in robotics and control systems
41 parts5
2 layers
Programador
andresR8/Robotics4Control5A mini-sized robot for investigation in robotics and control systems
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 20
- Pads
- 84
- Tracks, vias
- 276, 33
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 6 May 2016
- Updated
- 1 Aug 2017
Overview
Programador is an open-source printed circuit board by andresR8, from the andresR8/Robotics4Control repository on GitHub. It is a 2-layer board with 19 parts on 20 nets, routed with 276 tracks and 33 vias.
It is built around the NRF24L01. Its parts include 6 capacitors, 4 resistors, 2 ICs, 2 diodes and 2 connectors. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdRobotics4Control
A mini-sized robot for investigation in robotics and control systems more info at: http://www.coffeebrain.org/wiki/index.php?title=Robotics_4_Control
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | SM0805 | C3, C6 |
| 2 | 10k | SM1206 | R1, R3 |
| 2 | 22pF | SM0805 | C1, C2 |
| 2 | 430 | SM1206 | R2, R4 |
| 2 | LED | SM0805 | D1, D2 |
| 2 | SW_PUSH | SW_PUSH_SMALL | SW1, SW2 |
| 1 | crystals | X1 | |
| 1 | 10uF | c_elec_6.3x5.3 | C5 |
| 1 | 1uF | SM0805 | C4 |
| 1 | AT90USB162-A | TQFP32 | IC1 |
| 1 | CONN_3X2 | pin_array_3x2 | P2 |
| 1 | CONN_4 | USB_A_SMD | P1 |
| 1 | NRF24L01 | Nrf24l01 | U2 NRF24L01 |
More from andresR8/Robotics4Control
2- 2 layers
ChargeStation
andresR8/Robotics4Control
A mini-sized robot for investigation in robotics and control systems
16 parts5
Similar boards
- 2 layers91.4 × 71.1 mm
Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover
20 parts143MIT - 2 layers92.5 × 82.8 mm
Rifle and sensors
DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system
268 parts16 - 2 layers38.6 × 90.3 mm
BioElectricalSensor
CGrassin/biosignals
Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).
107 parts15MIT - 2 layers139 × 139 mm
Breeze electronics design
microdynamics-robot-quadcopter/breeze_electronics_design
This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.
107 parts13GPL-3.0 - 2 layers50 × 50 mm
- 2 layers100 × 80 mm
- 2 layers100 × 40 mm
- 2 layers66.4 × 52.5 mm
Questions
What parts does the Programador use?
19 parts, built around the NRF24L01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Programador KiCad files?
From the andresR8/Robotics4Control repository on GitHub, at the commit this page was made from: the board is HardwareFiles/CentralControllerBoard/Programador.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Programador design in my own project?
Its repository states no licence, so its author keeps all rights: ask andresR8 before reusing the design.