2 layers342.9 × 113.9 mm
Wisape board
wisape/fouraxis_board
the board use the stm32 then sensor use mpu6050, and hmc5883l and the wireless use nrf24l01
77 parts
2 layers139 × 139 mm
Breeze electronics design
microdynamics-robot-quadcopter/breeze_electronics_design13This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.
- Size
- 139 × 139 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 107
- Nets
- 199
- Pads
- 375
- Tracks, vias
- 430, 18
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 Aug 2016
- Updated
- 15 Dec 2017
Overview
Breeze electronics design is an open-source printed circuit board by microdynamics-robot-quadcopter, from the microdynamics-robot-quadcopter/breeze_electronics_design repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 139 × 139 mm with 107 parts on 199 nets, routed with 430 tracks and 18 vias.
It is built around the CP2102, NRF24L01 and LM27313XMF, with the HMC5883L, MIC5205YM5 and MIC5205-3.3YM5 among its other parts. Its parts include 33 capacitors, 23 resistors, 13 diodes, 11 ICs and 5 transistors. It belongs with the STM32 boards of this library.
Main components
9
CP2102
-Non-isolated TYPE-A UART(TTL) USB2.0 - USB Conversion Modules ROHSAi-ThinkerUSB Conversion Modules
NRF24L01
QFN-20-EP(4x4)-40℃~+85℃ -85dBm 0dBm 1.9V~3.6V 2.4GHz 2Mbps CRC check function、Automatic response function、Automatic retransmission function SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
LM27313XMF
SOT-23-5-40℃~+125℃@(TJ) 1 1.6MHz 2.7V~14V 400uA 5V~28V 800mA Adjustable Boost Boost Built-in No Overcurrent Protection、Cycle-by-cycle current limiting SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
HMC5883L
LGA-16_L3.0-W3.0-P0.50LPCC-16(3x3) New Arrivals ROHSHoneywellUncategorisedMIC5205YM5
SOT-23-5-40℃~+125℃ 1 1.242V~15.65V 150mA 150uA 16V 350mV@(150mA) Adjustable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMIC5205-3.3YM5
SOT-23-5-40℃~+85℃@(Ta) 1 150mA 200mV@(50mA) 20V 2uA 3.3V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SI2302
SOT-23-55℃~+150℃ 1 N-channel 120pF 1V 1W 20V 300pF 3A 4nC@4.5V 65mΩ@2.5V 80pF N-Channel SOT-23 MOSFETs ROHSYONGYUTAIMOSFETs
MBR0520
SOD-123-55℃~+150℃ 20V 450mV@500mA 5.5A 500mA Independent SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesS8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
kicad/README.mdbreeze_electronics_design
Description
This project is created and managed by KiCad software, which contains the breeze_std quadcopter's component library, footprint library, schematic, printed circuit boards, etc.
PCB
Parts
107| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 2.2UF | Capacitors_SMD:C_0402 | C2, C3, C4, C5, C7, C12, C14, C16, C20, C21, C23, C25, C33 |
| 8 | 0.1UF | Capacitors_SMD:C_0402 | C1, C6, C8, C11, C15, C18, C24, C32 |
| 7 | 33K | Resistors_SMD:R_0402 | R2, R3, R4, R20, R21, R22, R23 |
| 6 | 100 | Resistors_SMD:R_0402 | R9, R10, R11, R12, R15, R17 |
| 4 | 10K | Resistors_SMD:R_0402 | R1, R5, R7, R13 |
| 4 | 3K | Resistors_SMD:R_0402 | R8, R14, R16, R18 |
| 4 | SI2302 | TO_SOT_Packages_SMD:SOT-23 | Q2, Q3, Q4, Q5 |
| 3 | Motor | Footprint:PTH_Motor | , , |
| 2 | 10UF | Capacitors_SMD:C_1206 | C9, C10 |
| 2 | 2.2NF | Capacitors_SMD:C_0402 | C22, C27 |
| 2 | 22PF | Capacitors_SMD:C_0402 | C26, C29 |
| 2 | MBR0520 | Diodes_SMD:SOD-123 | D1, D2 |
| 2 | MotorA | Pin_Headers:Pin_Header_Straight_1x02 | M1, M3 |
| 2 | MotorB | Pin_Headers:Pin_Header_Straight_1x02 | M2, M4 |
| 1 | Footprint:PTH_Motor | ||
| 1 | 1.5PF | Capacitors_SMD:C_0402 | C30 |
| 1 | 1.65K | Resistors_SMD:R_0402 | R6 |
| 1 | 16MHZ | Footprint:SMD_XTAL3225 | X1 |
| 1 | 1PF | Capacitors_SMD:C_0402 | C31 |
| 1 | 2.7NH | Footprint:SMD_L0402 | L3 |
| 1 | 220NF | Capacitors_SMD:C_0402 | C17 |
| 1 | 220PF | Capacitors_SMD:C_0402 | C13 |
| 1 | 22K | Resistors_SMD:R_0402 | R19 |
| 1 | 3.9NH | Footprint:SMD_L0402 | L4 |
| 1 | 4.7PF | Capacitors_SMD:C_0402 | C28 |
| 1 | 4.7UF | Capacitors_SMD:C_0402 | C19 |
| 1 | 4.7UH | Footprint:SMD_L0402 | L1 |
| 1 | 8.2NH | Footprint:SMD_L0402 | L2 |
| 1 | 8MHZ | Crystals:Resonator_7.2x3mm | Y1 |
| 1 | Antenna | Footprint:SMD_AN9520 | ANT1 |
| 1 | BT_LED | LEDs:LED_0603 | LED10 |
| 1 | CHG_LED | LEDs:LED_0603 | LED11 |
| 1 | CP2102 | Footprint:QFN_CP2102 | U5 |
| 1 | HMC5883L | Footprint:LPCC_HMC5883L | U7 |
| 1 | HM_Bluetooth | Footprint:SMD_HM | U11 |
| 1 | Header | Pin_Headers:Pin_Header_Straight_1x02 | H1 |
| 1 | LM27313 | TO_SOT_Packages_SMD:SOT-23-5 | U3 |
| 1 | LTC4054 | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | M1_LED_BOT | LEDs:LED_0603 | LED3 |
| 1 | M1_LED_TOP | LEDs:LED_0603 | LED2 |
| 1 | M2_LED_BOT | LEDs:LED_0603 | LED5 |
| 1 | M2_LED_TOP | LEDs:LED_0603 | LED4 |
| 1 | M3_LED_BOT | LEDs:LED_0603 | LED7 |
| 1 | M3_LED_TOP | LEDs:LED_0603 | LED6 |
| 1 | M4_LED_BOT | LEDs:LED_0603 | LED9 |
| 1 | M4_LED_TOP | LEDs:LED_0603 | LED8 |
| 1 | MIC5205 | TO_SOT_Packages_SMD:SOT-23-5 | U6 |
| 1 | MIC5205-3.3 | TO_SOT_Packages_SMD:SOT-23-5 | U1 |
| 1 | MPU6050 | Footprint:QFN_MPU6050 | U8 |
| 1 | MS5611 | Footprint:QFN_MS5611 | U9 |
| 1 | MicroUSB | Connect:USB_Micro-B | USB1 |
| 1 | NRF24L01 | Footprint:QFN_NRF24L01 | U10 |
| 1 | POWER | LEDs:LED_0603 | LED1 |
| 1 | S8050 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | SIP4 | Pin_Headers:Pin_Header_Straight_1x04 | J1 |
| 1 | STM32F103T8U6TR | Footprint:VFQFPN_STM32F103T8U6TR | U2 |
| 1 | SW2X3 | Footprint:DIP_SW2x3 | S1 |
The 104 most common of 107 parts.
Similar boards
- 4 layers60.1 × 39.9 mm
NRF24L01 mtr driver
yanntalhouarne/ATMEGA324_MTR_DRV_PCB
Isolated motor driver based around the ATMEGA324PB.
147 parts - 2 layers48.7 × 33.6 mm
LM27313 boost convertor
karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.
15 parts - 2 layers149.9 × 106.7 mm
- 2 layers33.8 × 46 mm
Watchy
MrT-Stephens/Watchy-MrT-Stephens
This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".
63 parts1 - 4 layers64 × 77 mm
OBSPro
FabianSchwartau/OBSPro
Version of the OpenBikeSensor hardware optimized for PCBA
131 parts3LGPL-2.1 - 2 layers93 × 60 mm
Hornbill Open Universal Remote
ExploreEmbedded/hornbill-our
Open Univeral Remote with Hornbill ESP32 dev tools. BLE IR Bridge for device control
75 parts27 - 2 layers93 × 60 mm
Hornbill lights
ExploreEmbedded/hornbill-lights
Firmware and App for controlling RGB LED lights with the Hornbill ESP32 Platform
54 parts16
Questions
How big is the Breeze electronics design PCB?
It measures 139 × 139 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Breeze electronics design use?
107 parts, built around the CP2102, NRF24L01, LM27313XMF and HMC5883L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Breeze electronics design KiCad files?
From the microdynamics-robot-quadcopter/breeze_electronics_design repository on GitHub, at the commit this page was made from: the board is kicad/breeze_electronics_design.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Breeze electronics design design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).