2 layers60 × 60 mm
2 layers100 × 40 mm
Stm8-car ctrl
akrapivniy/remote-robot6- Size
- 100 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 33
- Pads
- 172
- Tracks, vias
- 394, 37
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Apr 2021
- Updated
- 25 Apr 2021
Overview
Stm8-car ctrl is an open-source printed circuit board by akrapivniy, from the akrapivniy/remote-robot repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 40 mm with 58 parts on 33 nets, routed with 394 tracks and 37 vias.
It is built around the STM8L051F3P6, NRF24L01 and CN3085. Its parts include 16 resistors, 14 capacitors, 8 switches, 5 connectors and 4 ICs. It belongs with the STM8 boards of this library.
Main components
3
STM8L051F3P6
TSSOP-20-40℃~+85℃ 1.8V~3.6V 12bit 16MHz 18 1KB 256Byte 8 Bit 8KB Built-in FLASH STM8 TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
NRF24L01
QFN-20-EP(4x4)-40℃~+85℃ -85dBm 0dBm 1.9V~3.6V 2.4GHz 2Mbps CRC check function、Automatic response function、Automatic retransmission function SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
CN3085
SOP-8-EP-40℃~+85℃ 1.205V 1A 1~3 3.8V~6V 3uA Charging IC Nickel-Metal Hydride Battery Support 恒流充电、涓流充电、自动再充电、充电终止、可编程充电电流、欠压锁定 SOP-8-EP Battery Management ROHSShangHai Consonance ElecBattery Management
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 8 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H8mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 7 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4, H6, H7, H8 |
| 6 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R7, R11, R15, R16 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4 |
| 3 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4, R12 |
| 2 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8, R9 |
| 1 | 150K-274K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13 |
| 1 | 2.4K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R14 |
| 1 | 3P BAT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | 510K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | CN3085 | Package_SO:SSOP-8_3.9x5.05mm_P1.27mm | U5 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | L78L33_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U6 |
| 1 | NRF24L | akrapivniy:NRF24L01SMD | U1 |
| 1 | Prog | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | STM8L051F3P | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | Temp | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J11 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J6 |
More from akrapivniy/remote-robot
1Similar boards
- 4 layers76 × 40 mm
ENGG3000-BaseStation
TheWasian/Ultrasonic-Whack-A-Mole
An interactive 3D Whack-A-Mole game powered by ESP32 microcontrollers and ultrasonic sensors, using real-time motion tracking to turn physical movement into gameplay.
60 parts2MIT - 2 layers59.8 × 147.1 mm
- 2 layers170 × 75 mm
- 2 layers86.5 × 46 mm
- 2 layers17.8 × 29.2 mm
- 2 layers42 × 62.4 mm
STM8S
naufalra/AutomatedTissueProcessor_Final_Thesis_PT.Miconos
Developing and inverse engineering heater for tissue processor with a target to use local components (TKDN) for over 70%. The research is also used for my bachelor thesis.
59 parts1 - 2 layers28.9 × 64.4 mm
Sensor rev1
npeixoto64/ExitGuardian
A full product project that watches windows with wireless sensors and has a gateway for the main door with wireless sensors. When you open the exit door to leave, it checks:
55 parts1 - 2 layers91.4 × 71.1 mm
Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover
20 parts143MIT
Questions
How big is the Stm8-car ctrl PCB?
It measures 100 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stm8-car ctrl use?
58 parts, built around the STM8L051F3P6, NRF24L01 and CN3085. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm8-car ctrl KiCad files?
From the akrapivniy/remote-robot repository on GitHub, at the commit this page was made from: the board is hardware/remote-control/stm8-car-ctrl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm8-car ctrl design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).