2 layers144.3 × 78.7 mm
Shield Galileo
rodolfoviolac/qser
QSER is a application and hardware shield interface to manage and fully control a engine motor (Quanser Robots) on Galileo v2 shield.
20 parts1MIT
2 layers
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 22
- Pads
- 77
- Tracks, vias
- 224, 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Oct 2018
- Updated
- 12 Dec 2018
Overview
Trab is an open-source printed circuit board by andredxc, from the andredxc/Microcontroladores repository on GitHub. It is a 2-layer board with 11 parts on 22 nets, routed with 224 tracks and 2 vias.
It is built around the 74LS04PC and LS7366R. Its parts include 7 ICs, 2 capacitors, 1 resistor and 1 crystal.
Main components
2
74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInvertersLS7366R
DIP-14-25℃~+80℃ 1 32 3V~5.5V 40MHz Asynchronous、Synchronous Divide-by-2 Falling Edge、Rising Edge Programmable divide ratio、Reset function、Synchronous counting、Multi-mode counting、Count value latch Synchronous Up Counter、Down Counter DIP-14 Counters, Dividers ROHSLSI/CSICounters, Dividers
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22pF | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C1, C2 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 30MHz | Crystal:Crystal_AT310_D3.0mm_L10.0mm_Vertical | Y1 |
| 1 | 74LS04 | lib_footprint:DIP-14_W7.62mm_Socket | U1 |
| 1 | 74LS08 | lib_footprint:DIP-14_W7.62mm_Socket | U2 |
| 1 | GalileoGen2Shield | lib_footprint:galileo | U8 |
| 1 | L298N_2 | lib_footprint:krex5 | U4 |
| 1 | LS7366R | Package_DIP:DIP-14_W7.62mm_Socket | U3 |
| 1 | MotorEncoder | lib_footprint:krex4 | U7 |
| 1 | end | Connector_Samtec_HLE_THT:Samtec_HLE-116-02-xx-DV-TE_2x08_P2.54mm_Horizontal | U5 |
Questions
What parts does the Trab use?
11 parts, built around the 74LS04PC and LS7366R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Trab KiCad files?
From the andredxc/Microcontroladores repository on GitHub, at the commit this page was made from: the board is esquematico/trab.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Trab design in my own project?
Its repository states no licence, so its author keeps all rights: ask andredxc before reusing the design.
Similar boards
- 2 layers
Robot encoder module
adamjvr/robot-encoder-module
LSI encoder chip carrier board for Archim motion control board can be used with any other controller
16 parts - 2 layers
- 2 layers110 × 110 mm
- 2 layers171.2 × 72.9 mm
Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
34 parts1k - 2 layers196.3 × 118.7 mm
Motherboard
Redherring32/OpenTendo
An Open-Source HardWare (OSHW) recreation of the original 1985 front-loading NES Motherboard
100 parts860 - 2 layers49.6 × 78.3 mm
Odyssey
jotego/jtcores
FPGA cores compatible with multiple arcade game machines and KiCAD schematics of arcade games. Working on MiSTer FPGA/Analogue Pocket
24 parts346GPL-3.0 - 2 layers237.5 × 102.9 mm
Instruction
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
112 parts301Unlicense