Skip to the content
1234567891011121314

LS7366R

LSI/CSIExtended

-25℃~+80℃ 1 32 3V~5.5V 40MHz Asynchronous、Synchronous Divide-by-2 Falling Edge、Rising Edge Programmable divide ratio、Reset function、Synchronous counting、Multi-mode counting、Count value latch Synchronous Up Counter、Down Counter DIP-14 Counters, Dividers ROHS

Part id
lsi-csi/LS7366R
Category
Counters, Dividers
Package
DIP-14
Pins
5
In stock
14 at JLCPCB (C3828361)
Used on
5 open-source boards

Overview

The LS7366R is a counters, Divider made by LSI/CSI in a DIP-14 package with 5 pins. -25℃~+80℃ 1 32 3V~5.5V 40MHz Asynchronous、Synchronous Divide-by-2 Falling Edge、Rising Edge Programmable divide ratio、Reset function、Synchronous counting、Multi-mode counting、Count value latch Synchronous Up Counter、Down Counter DIP-14 Counters, Dividers ROHS.

PCBKit's library has its footprint (Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 14 are in stock at JLCPCB (part C3828361). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

1234567891011121314
Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Open-source boards using it

5
  • 2 layers144.3 × 78.7 mmShield Galileo, the printed circuit board in 3D

    Shield Galileo

    rodolfoviolac/qser

    QSER is a application and hardware shield interface to manage and fully control a engine motor (Quanser Robots) on Galileo v2 shield.

    20 parts1MIT
  • 2 layersRobot encoder module, the printed circuit board in 3D

    Robot encoder module

    adamjvr/robot-encoder-module

    LSI encoder chip carrier board for Archim motion control board can be used with any other controller

    16 parts
  • 2 layersTrab, the printed circuit board in 3D

    Trab

    andredxc/Microcontroladores

    11 parts
  • 2 layersShield, the printed circuit board in 3D

    Shield

    gumadeiras/inf-microcontroladores

    16 partsMIT
  • 2 layers110 × 110 mmDiplom, the printed circuit board in 3D

    Diplom

    vlad-chan/diploma-pcb

    Repository for my diploma work. PCB design and schematic.

    130 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LS7366R?

Yes. the footprint Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LS7366R?

DIP-14, with 5 pins. Its footprint is drawn on this page.

Where is the LS7366R datasheet?

LSI/CSI publishes it: the Datasheet link on this page opens it.

Where can I order the LS7366R?

JLCPCB lists it as part C3828361, with 14 in stock; the sellers' links on this page open their listings.

What can replace the LS7366R?

Parts like it in the library: the SN74LS90N by Texas Instruments, the SN74HC393N(LX) by lingxingic, the SN74HC90N(LX) by lingxingic and the SN74LS393N(LX) by lingxingic. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LS7366R?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.