

Product display stepper speaker
repo for holding my free lance work
- Size
- 91.9 × 55.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 58
- Pads
- 121
- Tracks, vias
- 170, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Jun 2024
- Updated
- 13 Aug 2026
Overview
Product display stepper speaker is an open-source printed circuit board by ambadran, from the ambadran/Free-Lance-Projects repository on GitHub. It is a 2-layer board of 91.9 × 55.6 mm with 20 parts on 58 nets, routed with 170 tracks and 0 vias.
It is built around the DRV8825PWP and LM338T. Its parts include 4 resistors, 2 capacitors, 2 ICs, 1 connector and 1 switch. It belongs with the audio and music and robots and motor control boards and the RP2040 boards of this library.
Main components
2DRV8825PWP
HTSSOP-28-EP-40℃~+85℃ 2 2.5A 200mΩ 32 8.2V~45V Bipolar Driver STEP/DIR Yes HTSSOP-28-EP Stepper Motor Driver ROHSTexas InstrumentsStepper Motor DriverLM338T
TO-2200.003%Vout 0℃~+125℃@(Tj) 1 1.231V~1.269V 1.5V@(5A) 10mA 12V 5A 72dB@(120Hz) Adjustable Over Current Protection、Thermal shutdown Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHGSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | DRV8825 | DRV8825:DRV8825_module | A1, A2 |
| 2 | JST-2p | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | Speaker1, Speaker2 |
| 2 | JST-4p | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | Stepper1, Stepper2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 330uf | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C1 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 470uf | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C2 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 1 | Conn_01x11 | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | PAM8403_POT_breakout_board1 |
| 1 | JST3p | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | MotionSensor1 |
| 1 | LM338T | LM338T:TO254P1054X470X1955-3 | U1 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
More from ambadran/Free-Lance-Projects
11- 2 layers93.7 × 103.5 mm

- 2 layers165.2 × 114.6 mm

Web controlled relay board v2.0
ambadran/Free-Lance-Projects
repo for holding my free lance work
71 parts - 2 layers63.9 × 77.9 mm

- 2 layers44.5 × 64.8 mm

- 2 layers86.8 × 64.1 mm

- 2 layers86.8 × 63.8 mm

- 2 layers90.9 × 52.4 mm

- 2 layers70.8 × 55.9 mm

- 2 layers51.5 × 60.5 mm

- 2 layers100 × 70 mm

- 2 layers33.5 × 48.8 mm

Similar boards
- 2 layers87.6 × 83.8 mm

ENEL200Group01
cva68/ESPBreadboardRobot
Peripheral and breakout board for the ESP-32, with firmware designed for use with Microsoft MakeCode
88 parts2MIT - 2 layers56 × 61 mm

- 2 layers74.9 × 38.1 mm

- 2 layers68.6 × 53.3 mm

ENEL200ShieldGroup01
TheBroKendrick/Arduino-Turtle-Robot-
A project made in my First Professional Year of Electrical Engineering. This was made in collaboration with two other people and focussed on the basics of PCB design, 3D modelling, and basic embedded software…
41 parts - 2 layers195 × 81 mm

Linesorter
varnikaa12/PSU-IME-1
Design of an MVP tabletop production cell that sorts small colored cylinders representing workpieces in a manufacturing line.
75 parts - 2 layers100 × 99.8 mm

- 2 layers125 × 125 mm

Diy robotics arm
mathias31415/diy_robotics
Gripper, PCBs and ROS2 software for Six-Axis Robot Arm WE-R2.4 from LoboCNC
34 parts39 - 4 layers20.2 × 14.8 mm

Questions
How big is the Product display stepper speaker PCB?
It measures 91.9 × 55.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Product display stepper speaker use?
20 parts, built around the DRV8825PWP and LM338T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Product display stepper speaker KiCad files?
From the ambadran/Free-Lance-Projects repository on GitHub, at the commit this page was made from: the board is product_display_stepper_speaker/Circuit/V2/V2.kicad_pcb and its schematic distress_call_robot/Circuit/Circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Product display stepper speaker design in my own project?
Its repository states no licence, so its author keeps all rights: ask ambadran before reusing the design.