2 layers66 × 100 mm
ContactorDriver
lhr-solar/Contactor-DriverPCB
LED Purposes -D1: Green LED used to indicate 12V board power -D2: Green LED used to indicate contactor status -D3: Green LED used to indicate precharge circuit status
37 parts
2 layers56 × 61 mm
PowerSupply
DanHert/PowerSupply- Size
- 56 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 48
- Pads
- 212
- Tracks, vias
- 502, 71
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Sep 2019
- Updated
- 22 Sep 2019
Overview
PowerSupply is an open-source printed circuit board by DanHert, from the DanHert/PowerSupply repository on GitHub. It is a 2-layer board of 56 × 61 mm with 65 parts on 48 nets, routed with 502 tracks and 71 vias.
It is built around the LM358, INA2132U and L7805, with the LM338T, TPS60403 and BAT54A among its other parts. Its parts include 29 capacitors, 16 resistors, 9 ICs, 9 connectors and 1 diode. It belongs with the power boards and the STM32 boards of this library.
Main components
6
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
INA2132U
SOIC-14-18V~-1.35V、1.35V~18V -40℃~+85℃ 0.05% 0.1V/us 12mA 150uV 160uA 1V/V 2 2.7V~36V 2uV/℃ 300MHz 40nA 65nV/√Hz@1kHz 90dB Internally set gain Rail-to-rail input SOIC-14 Instrumentation Amplifiers ROHSTexas InstrumentsInstrumentation Amplifiers
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LM338T
TO-2200.003%Vout 0℃~+125℃@(Tj) 1 1.231V~1.269V 1.5V@(5A) 10mA 12V 5A 72dB@(120Hz) Adjustable Over Current Protection、Thermal shutdown Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHGSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS60403
UncategorisedTexas Instruments
BAT54A
SOT-231 Pair Common Anode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky Diodes
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C5, C7, C22, C23, C25, C26, C27, C28, C29 |
| 9 | 1u | Capacitor_SMD:C_0805_2012Metric | C10, C11, C12, C13, C15, C16, C17, C20, C21 |
| 7 | 13K | Resistor_SMD:R_0805_2012Metric | R1, R3, R6, R7, R8, R9, R10 |
| 5 | 0R05 | Resistor_SMD:R_1206_3216Metric | R11, R14, R15, R16, R17 |
| 5 | 1n | Capacitor_SMD:C_0805_2012Metric | C3, C4, C6, C8, C9 |
| 4 | Conn_01x01 | Connector_Wire:SolderWirePad_1x01_Drill2mm | J2, J3, J8, J9 |
| 3 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U3, U9 |
| 2 | 20p | Capacitor_SMD:C_0805_2012Metric | C18, C19 |
| 2 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5, J6 |
| 2 | NoPopulate! | Resistor_SMD:R_0805_2012Metric | R12, R13 |
| 1 | 250R | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 2K | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 330p | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | BAT54A | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | CP | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C24 |
| 1 | Conn_01x01 | Connector_Wire:SolderWirePad_1x01_Drill0.8mm | J1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Conn_01x16 | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J7 |
| 1 | Crystal32MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | INA213 | Package_TO_SOT_SMD:SOT-363_SC-70-6_Handsoldering | U7 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | LM338T | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | MCP1501T-33E_CHY | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | STM32F030K6Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U8 |
| 1 | TPS60403 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
Similar boards
- 2 layers34.3 × 19.8 mm
- 2 layers147.3 × 72.1 mm
- 2 layers87.6 × 83.8 mm
ENEL200Group01
cva68/ESPBreadboardRobot
Peripheral and breakout board for the ESP-32, with firmware designed for use with Microsoft MakeCode
88 parts2MIT - 2 layers74.9 × 38.1 mm
- 2 layers68.6 × 53.3 mm
ENEL200ShieldGroup01
TheBroKendrick/Arduino-Turtle-Robot-
A project made in my First Professional Year of Electrical Engineering. This was made in collaboration with two other people and focussed on the basics of PCB design, 3D modelling, and basic embedded software…
41 parts - 2 layers195 × 81 mm
Linesorter
varnikaa12/PSU-IME-1
Design of an MVP tabletop production cell that sorts small colored cylinders representing workpieces in a manufacturing line.
75 parts - 2 layers70.8 × 55.9 mm
Questions
How big is the PowerSupply PCB?
It measures 56 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PowerSupply use?
65 parts, built around the LM358, INA2132U, L7805 and LM338T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PowerSupply KiCad files?
From the DanHert/PowerSupply repository on GitHub, at the commit this page was made from: the board is PowerSupply/PowerSupply.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PowerSupply design in my own project?
Its repository states no licence, so its author keeps all rights: ask DanHert before reusing the design.