
Linesorter
varnikaa12/PSU-IME-1
Design of an MVP tabletop production cell that sorts small colored cylinders representing workpieces in a manufacturing line.

Design of an MVP tabletop production cell that sorts small colored cylinders representing workpieces in a manufacturing line. Delivering a modular and reconfigurable mechanical design, predominantly 3D-printed or easily fabricated components, low assembly complexity, 24V PLC compatibility using functino block via OpenPLC on RevPi hardware.
Linesorter is an open-source printed circuit board by varnikaa12, from the varnikaa12/PSU-IME-1 repository on GitHub. It is a 2-layer board of 195 × 81 mm with 75 parts on 66 nets, routed with 778 tracks and 127 vias.
It is built around the ESP32-DEVKITC-VE, TCMT1100 and AMS1117-3.3, with the LM338T and 1N5232B among its other parts. Its parts include 28 resistors, 17 connectors, 14 capacitors, 10 ICs and 4 diodes. It belongs with the ESP32 boards of this library.
The Harold & Inge Marcus Department of Industrial & Manufacturing Engineering at The Pennsylvania State University is launching a new course in industrial automation and robotics. They are seeking a low- cost, open-source, and modular tabletop training platform that supports hands-on learning in industrial control systems, programmable logic controllers (PLCs), system integration, and digital twins while currently lacking an affordable, modular physical platform for lab instruction. The department's existing commercial training devices provide strong functionality but are too expensive, closed, and difficult to modify or repair, limiting their suitability for long-term academic use and iterative student prototyping. The student team will design and prototype an MVP tabletop production cell that sorts small colored cylinders representing workpieces in a manufacturing line. Key requirements include modular and reconfigurable mechanical design, predominantly 3D-printed or easily fabricated components, low assembly complexity, 24V PLC compatibility using ladder logic via OpenPLC on RevPi hardware, minimized custom electronics, and sourcing of all major components from established suppliers. In-scope activities include mechanical design using primarily 3D-printed components, integration of 24 V electrical hardware aligned with IEC 61131-2/3, PLC-based control logic, industrial sensor integration, and development of a digital twin in ProtoTwin. Stretch goals include multi-size LEGO sorting, a bulk hopper with automatic singulation, and interoperability with other tabletop cells to create an end-to-end automated workflow. Core deliverables include: (1) a working physical prototype suitable for classroom demonstrations, (2) complete open-source documentation including CAD, bill of materials, assembly drawings, wiring diagrams, and source code, and (3) a validated ProtoTwin model of the system. Key budget requirements include a target build cost of approximately $100 per unit with an absolute maximum of $500. Expected benefits include substantial cost reduction relative to commercial trainers, improved instructional quality through hands-on interaction with industrial hardware, reduced setup and maintenance effort, and a flexible open-source platform that future cohorts can modify, repair, and extend. The project is planned for 15 weeks, starting January 12th and ending by May 3rd with the Capstone Showcase and Program Closeout Review.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 10k | Resistor_SMD:R_0201_0603Metric | R6, R10, R11, R13, R14, R16, R17, R19, R20, R22, R23, R24, R25, R26, R27, R28 +1 |
| 6 | 2200 | Resistor_SMD:R_0201_0603Metric | R7, R9, R12, R15, R18, R21 |
| 6 | TCMT1100 | Package_SO:SOP-4_4.4x2.6mm_P1.27mm | U3, U5, U6, U7, U8, U9 |
| 5 | B3B-XH-ALFSN | JST 3-terminal:CONN_B3B-XH-A_JST | J2, J13, J14, J15, J16 |
| 4 | 470u | Capacitor_SMD:CP_Elec_3x5.3 | C9, C10, C11, C12 |
| 3 | 1985234 | headers:CONN_1985234 | J3, J4, J17 |
| 2 | .1u | Capacitor_SMD:C_0201_0603Metric | C2, C3 |
| 2 | 1 | Resistor_SMD:R_0201_0603Metric | R1, R4 |
| 2 | 100n | Capacitor_SMD:C_0201_0603Metric | C13, C14 |
| 2 | 10u | Capacitor_SMD:C_0201_0603Metric | C7, C8 |
| 2 | 1N4002 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | 1N4004 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D3, D4 |
| 2 | 47u | Capacitor_SMD:C_0201_0603Metric | C1, C4 |
| 2 | USB_A | Connector_USB:USB_A_Connfly_DS1095 | J1, J12 |
| 1 | .1u | Capacitor_SMD:CP_Elec_3x5.3 | C6 |
| 1 | 100u | Capacitor_SMD:CP_Elec_3x5.3 | C5 |
| 1 | 1300 | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | 150 | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | 1N5232B | 1N5342BTR:AFL-W2C8.9D | CR1 |
| 1 | 1k | Resistor_SMD:R_0201_0603Metric | R5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | B4B-XH-A LFSN | JST 4-terminal:CONN_B4B-XH-A LFSN_JST | J11 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U10 |
| 1 | LM338T | LM338T:TO254P1054X470X1955-3 | U1 |
| 1 | LM78L05_SO8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Pololu_Breakout_DRV8825 | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | Sens1 | S5B-PH-K-S(LF)(SN):CONN_S5B-PH-K-S_JST | J5 |
| 1 | Sens2 | S5B-PH-K-S(LF)(SN):CONN_S5B-PH-K-S_JST | J6 |
| 1 | Sens3 | S5B-PH-K-S(LF)(SN):CONN_S5B-PH-K-S_JST | J7 |
| 1 | Sens4 | S5B-PH-K-S(LF)(SN):CONN_S5B-PH-K-S_JST | J8 |
| 1 | Sens5 | S5B-PH-K-S(LF)(SN):CONN_S5B-PH-K-S_JST | J9 |
| 1 | Sens6 | S5B-PH-K-S(LF)(SN):CONN_S5B-PH-K-S_JST | J10 |

varnikaa12/PSU-IME-1
Design of an MVP tabletop production cell that sorts small colored cylinders representing workpieces in a manufacturing line.

cva68/ESPBreadboardRobot
Peripheral and breakout board for the ESP-32, with firmware designed for use with Microsoft MakeCode



TheBroKendrick/Arduino-Turtle-Robot-
A project made in my First Professional Year of Electrical Engineering. This was made in collaboration with two other people and focussed on the basics of PCB design, 3D modelling, and basic embedded software…


PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format

FHafting/BREAD
This project is fully documented in the paper: Shane Oberloier, Nicholas G. Whisman, Finn Hafting, Joshua M. Pearce, Open Source Framework for a Broadly Expandable and Reconfigurable Data Acquisition and Automation…

dovy6/Faiked
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
It measures 195 × 81 mm and has 2 copper layers, 1.6 mm thick.
75 parts, built around the ESP32-DEVKITC-VE, TCMT1100, AMS1117-3.3 and LM338T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the varnikaa12/PSU-IME-1 repository on GitHub, at the commit this page was made from: the board is In-House-PCB/PCB V1- Stepper Motor/linesorter.kicad_pcb and its schematic In-House-PCB/PCB V1- Stepper Motor/linesorter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask varnikaa12 before reusing the design.