

4knobs.circuitjs
read-only mirror
- Size
- 70.7 × 21.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 22
- Pads
- 97
- Tracks, vias
- 207, 19
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Jun 2024
- Updated
- 7 Sep 2026
Overview
4knobs.circuitjs is an open-source printed circuit board by Alloyed, from the Alloyed/KitsBlips repository on GitHub, published under the MIT licence. It is a 2-layer board of 70.7 × 21.1 mm with 35 parts on 22 nets, routed with 207 tracks and 19 vias.
It is built around the TL072 and B10K. Its parts include 16 resistors, 8 capacitors, 5 connectors and 3 ICs.
Main components
2README
README.mdKitsBlips
Monorepo for my Eurorack/synthesizer hobby projects! (that's me, I'm kit)
Everything is always in a state of "not-quite-finished". if something is unclear or unusable in its current state, and you want to use it, feel free to open an issue or contact me.
For technical reasons, this project is ordered by toolset and not by module. this means the full source for a single module may be across multiple folders! Sorry.
unless otherwise listed, all code is MIT licensed. All hardware designs and graphics (kicad, svg etc) are CC-BY-SA 4.0.
Building/Installing
Each project/folder has a specific readme that includes extra steps if necessary, but in general, builds are managed using cmake.
$ mkdir -p <folder>/build && cd <folder>/build
$ cmake .. -DCMAKE_BUILD_TYPE=<build type: Debug, MinSizeRel, RelWithDebInfo>
$ cmake --build . --config=<the build type>
$ cmake --install . --prefix <location> # if the target supports installation
$ ctest # if the target has unit testsonce you have all your configurations set up, you can quickly rebuild all/run tests using rebuild-all.sh.
Projects
For Hardware:
For VCV Rack:
- /vcvrack
- Modules for VCV Rack
For DAWS:
- /daw
- Modules for DAWS (VST3/CLAP plugins)
- /clapeze
- Microframework for writing clap plugins
- /kitgui
- UI library for clap plugins
Shared:
- /panels
- Art/Panel designs.
- /kitdsp
- Shared DSP code, runs on all platforms
- /kitdsp-gpl
- DSP code with GPL algorithms. This is the only folder that comes with extra license restrictions!
AI statement
KitsBlips will not accept PRs that are generated wholly or in significant part by generative AI. Future development will not use Generative AI.
There are a few older commits where I tried it for automatic refactoring, found it less than successful, and cleaned it up afterward. You can try the same thing; I wouldn't be able to tell the difference probably, but my conclusion to that experiment was that it wasn't worth it at the time.
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4, C7, C8 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R11, R12 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R13, R14 |
| 4 | 20k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R16 |
| 2 | 220R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R15 |
| 2 | B10k | KitsBlips:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1, RV2 |
| 2 | IN | KitsBlips:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J2, J4 |
| 2 | OUT | KitsBlips:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J3, J5 |
| 2 | TL072 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U3 |
| 1 | 0.33uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | EURO_PWR_2x5 | KitsBlips:Pins_2x05_2.54mm_TH_Europower_shrouded | J1 |
| 1 | L78L05_TO92 | Package_TO_SOT_THT:TO-92_Inline | U2 |
The 34 most common of 35 parts.
Questions
How big is the 4knobs.circuitjs PCB?
It measures 70.7 × 21.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 4knobs.circuitjs use?
35 parts, built around the TL072 and B10K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 4knobs.circuitjs KiCad files?
From the Alloyed/KitsBlips repository on GitHub, at the commit this page was made from: the board is kicad/4knobs/4knobs.circuitjs.kicad_pcb and its schematic kicad/4knobs/4knobs.circuitjs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 4knobs.circuitjs design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Alloyed/KitsBlips
10- 2 layers150 × 100 mm

- 2 layers84 × 100 mm

- 2 layers80.8 × 110 mm

- 2 layers40 × 110 mm

- 2 layers80.8 × 110 mm

- 2 layers19.9 × 100 mm

- 2 layers60.5 × 100 mm

- 2 layers80.8 × 110 mm

- 2 layers70 × 100 mm

- 2 layers91 × 50 mm

Similar boards
- 2 layers48.4 × 106.3 mm

- 2 layers60 × 110 mm

- 2 layers38 × 100 mm

- 2 layers40 × 99 mm

- 2 layers90.2 × 128.5 mm

Vintage Dual VCA v1.0
StudioKAT/VintageDualVCA
If nothing is patched into OUT1, the signal from CH1 is automatically mixed into OUT2.
113 parts7 - 2 layers29.2 × 106.7 mm

- 2 layers30 × 100 mm

- 2 layers29.5 × 100 mm

Simple Euclidean PCB v4
NorthCoastModularCollective/Escanaba-Euclidean
A simple module, based on the ATtiny85 that creates euclidean beats from a clock input. [under development]
30 parts4