Skip to the content
2 layers19.9 × 100 mmNoise, the printed circuit board in 3D

read-only mirror

Size
19.9 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
22
Pads
74
Tracks, vias
97, 6
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
15 Jun 2024
Updated
7 Sep 2026

Overview

Noise is an open-source printed circuit board by Alloyed, from the Alloyed/KitsBlips repository on GitHub, published under the MIT licence. It is a 2-layer board of 19.9 × 100 mm with 30 parts on 22 nets, routed with 97 tracks and 6 vias.

It is built around the TL072 and BC548. Its parts include 12 resistors, 8 capacitors, 3 connectors, 2 diodes and 1 IC.

Main components

2

README

README.md

KitsBlips

Monorepo for my Eurorack/synthesizer hobby projects! (that's me, I'm kit)

Everything is always in a state of "not-quite-finished". if something is unclear or unusable in its current state, and you want to use it, feel free to open an issue or contact me.

For technical reasons, this project is ordered by toolset and not by module. this means the full source for a single module may be across multiple folders! Sorry.

unless otherwise listed, all code is MIT licensed. All hardware designs and graphics (kicad, svg etc) are CC-BY-SA 4.0.

Building/Installing

Each project/folder has a specific readme that includes extra steps if necessary, but in general, builds are managed using cmake.

text
$ mkdir -p <folder>/build && cd <folder>/build
$ cmake .. -DCMAKE_BUILD_TYPE=<build type: Debug, MinSizeRel, RelWithDebInfo>
$ cmake --build . --config=<the build type>
$ cmake --install . --prefix <location> # if the target supports installation
$ ctest # if the target has unit tests

once you have all your configurations set up, you can quickly rebuild all/run tests using rebuild-all.sh.

Projects

For Hardware:

  • /daisy
    • DSP code for hardware modules, using the Daisy microcontroller.
  • /kicad
    • Hardware design files

For VCV Rack:

For DAWS:

  • /daw
    • Modules for DAWS (VST3/CLAP plugins)
  • /clapeze
    • Microframework for writing clap plugins
  • /kitgui
    • UI library for clap plugins

Shared:

  • /panels
    • Art/Panel designs.
  • /kitdsp
    • Shared DSP code, runs on all platforms
  • /kitdsp-gpl
    • DSP code with GPL algorithms. This is the only folder that comes with extra license restrictions!

AI statement

KitsBlips will not accept PRs that are generated wholly or in significant part by generative AI. Future development will not use Generative AI.

There are a few older commits where I tried it for automatic refactoring, found it less than successful, and cleaned it up afterward. You can try the same thing; I wouldn't be able to tell the difference probably, but my conclusion to that experiment was that it wasn't worth it at the time.

Parts

30
QtyValueFootprintReferences
5100kResistor_SMD:R_0603_1608MetricR1, R2, R4, R6, R11
20.1uFCapacitor_SMD:C_0603_1608MetricC1, C2
210uFPCM_4ms_Capacitor:CP_Radial_P2.5mmC3, C4
21N5817Diode_THT:D_DO-35_SOD27_P10.16mm_HorizontalD1, D2
21kResistor_SMD:R_0603_1608MetricR5, R10
2LOGOmisc:logoG***, G***
1.0033uFCapacitor_THT:C_Rect_L11.0mm_W5.1mm_P10.00mm_MKTC7
1.033uFCapacitor_THT:C_Rect_L11.0mm_W5.1mm_P10.00mm_MKTC8
10.22ufCapacitor_THT:C_Rect_L11.0mm_W5.1mm_P10.00mm_MKTC5
110kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR8
110kResistor_SMD:R_0603_1608MetricR12
110kPotentiometer_THT:Potentiometer_Runtron_RM-065_VerticalRV1
12kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR7
1330pfCapacitor_THT:C_Axial_L5.1mm_D3.1mm_P7.50mm_HorizontalC6
147kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR9
1680Resistor_SMD:R_0603_1608MetricR3
1BC548Package_TO_SOT_THT:TO-92_InlineQ1
1EURO_PWR_2x5misc:Pins_2x05_2.54mm_TH_Europower_shroudedJ1
1PINKConnector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHolesJ2
1TL072PCM_4ms_Package_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU1
1WHITEConnector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHolesJ3

More from Alloyed/KitsBlips

10
  • 2 layers150 × 100 mmStylophone-1968, the printed circuit board in 3D

    Stylophone-1968

    Alloyed/KitsBlips

    read-only mirror

    91 parts2MIT
  • 2 layers84 × 100 mm4gates, the printed circuit board in 3D

    4gates

    Alloyed/KitsBlips

    read-only mirror

    80 parts2MIT
  • 2 layers80.8 × 110 mmMixer, the printed circuit board in 3D

    Mixer

    Alloyed/KitsBlips

    read-only mirror

    76 parts2MIT
  • 2 layers40 × 110 mmLogic, the printed circuit board in 3D

    Logic

    Alloyed/KitsBlips

    read-only mirror

    58 parts2MIT
  • 2 layers80.8 × 110 mmCsfilter, the printed circuit board in 3D

    Csfilter

    Alloyed/KitsBlips

    read-only mirror

    45 parts2MIT
  • 2 layers70.7 × 21.1 mm4knobs.circuitjs, the printed circuit board in 3D

    4knobs.circuitjs

    Alloyed/KitsBlips

    read-only mirror

    35 parts2MIT
  • 2 layers60.5 × 100 mmQuantize, the printed circuit board in 3D

    Quantize

    Alloyed/KitsBlips

    read-only mirror

    25 parts2MIT
  • 2 layers80.8 × 110 mmEurorack, the printed circuit board in 3D

    Eurorack

    Alloyed/KitsBlips

    read-only mirror

    15 parts2MIT
  • 2 layers70 × 100 mmTracker, the printed circuit board in 3D

    Tracker

    Alloyed/KitsBlips

    read-only mirror

    14 parts2MIT
  • 2 layers91 × 50 mmMidi pcb, the printed circuit board in 3D

    Midi pcb

    Alloyed/KitsBlips

    read-only mirror

    8 parts2MIT

Similar boards

  • 2 layers159 × 99.9 mmBasiq Explorer, the printed circuit board in 3D

    Basiq Explorer

    velvia-fifty/AudioThings

    DIY audio-related projects of questionable quality and dubious utility; delivered in 30 minutes or less or the next one is free

    281 parts1
  • 2 layers88.9 × 177.8 mmModulinVCO, the printed circuit board in 3D

    ModulinVCO

    ConDarth/modulin

    This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.

    113 parts
  • 2 layers45 × 45 mmDMH Submodule XFader, the printed circuit board in 3D

    DMH Submodule XFader

    DeMarco/DMH-Submodules

    Collection of small plugin PCBs used as subcircuits in major Kosmo modules

    52 partsCC0-1.0
  • 2 layers101.3 × 128.5 mm3-phase lfo, the printed circuit board in 3D

    3-phase lfo

    tpcarlson/synth-diy

    Mostly Eurorack projects

    129 parts107
  • 2 layers20 × 104.5 mmWhite Noise, the printed circuit board in 3D

    White Noise

    MatthewATaylor/Modular-Synth-Hardware

    KiCad schematics and PCB layouts for my modular synth

    24 parts11MIT
  • 2 layers81.3 × 100 mmVCO PCB B REV2, the printed circuit board in 3D

    VCO PCB B REV2

    gfm16617/EngrEDU_Website

    58 parts4
  • 2 layers80 × 100 mm11 fm drum, the printed circuit board in 3D

    11 fm drum

    bmurauer/cynthia

    Plans for my modular synthesizer

    125 parts

Questions

How big is the Noise PCB?

It measures 19.9 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Noise use?

30 parts, built around the TL072 and BC548. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Noise KiCad files?

From the Alloyed/KitsBlips repository on GitHub, at the commit this page was made from: the board is kicad/noise/noise.kicad_pcb and its schematic kicad/4knobs/4knobs.circuitjs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Noise design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).