
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

PCB multiusos para ESP8266-01
Esp8266 01 is an open-source printed circuit board by akirasan, from the akirasan/esp8266_multiusos repository on GitHub, published under the MIT licence. It is a 2-layer board of 47.2 × 54.5 mm with 47 parts on 29 nets, routed with 468 tracks and 88 vias.
It is built around the AMS1117-3.3 and WS2812B. Its parts include 5 resistors, 3 diodes, 2 capacitors, 2 ICs and 2 connectors. It belongs with the ESP8266 boards of this library.
PCB multiusos para ESP8266-01
Mas info sobre el proyecto en esta entrada: https://akirasan.net/esp8266pcb_base/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Val** | esp8266_01:atencion | Ref**, Ref**, Ref**, Ref**, Ref** |
| 3 | Config_HW_4x1 | MisFootprints:Config_HW_4x1_HandSolder | CH2, CH3, CH5 |
| 3 | WS2812B | MisFootprints:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm_Hands_MODIFICADO | D1, D2, D3 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3 |
| 2 | 3K3 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5 |
| 2 | Config_HW_3x1 | MisFootprints:Config_HW_3x1_HandSolder | CH1, CH4 |
| 2 | Config_HW_6x1 | MisFootprints:Config_HW_6x1_HandSolder | CH7, CH8 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | I2C_J2, J1 |
| 2 | Val** | MisFootprints:flechas | Ref**, Ref** |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Config_HW_2x1 | MisFootprints:Config_HW_2x1_HandSolder | CH6 |
| 1 | ESP-01v090 | ESP8266:ESP-01 | U2 |
| 1 | GND | MisFootprints:Point_Contact_1 | TP2 |
| 1 | I2C_IN | MisFootprints:5xConector_interface_PCB | I2C_IO_OUT1 |
| 1 | I2C_OUT | MisFootprints:5xConector_interface_PCB | I2C_IO_IN1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB_A | Connector_USB:USB_A_CNCTech_1001-011-01101_Horizontal | J2 |
| 1 | USB_B | Connector_USB:USB_Micro-B_Molex-105017-0001 | J3 |
| 1 | VCC | MisFootprints:Point_Contact_1 | TP1 |
| 1 | Val** | MisFootprints:multigpio | Ref** |
| 1 | Val** | MisFootprints:akirasan_logo_inv_small | Ref** |
| 1 | Val** | esp8266_01:design_v1 | Ref** |
| 1 | Val** | MisFootprints:I2C | Ref** |
| 1 | Val** | esp8266_01:led | Ref** |
| 1 | Val** | MisFootprints:i2c_in | Ref** |
| 1 | Val** | MisFootprints:logo_kicad | Ref** |
| 1 | Val** | MisFootprints:akirasan_logo | Ref** |
| 1 | Val** | MisFootprints:akirasan_logo_small | Ref** |
| 1 | Val** | MisFootprints:i2c_out | Ref** |
The 46 most common of 47 parts.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

MycroftAI/hardware-mycroft-mark-II
Mycroft's Mark II Rpi mechanical, electrical and industrial designs


NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software


Tomas-Kuchta-FPV/Open-ESPilot
An open-source project to develop a custom ESP32-based flight controller designed primarily for use with ArduPilot. Focused on affordability, flexibility, and ease of integration with various robotic and UAV platforms.


It measures 47.2 × 54.5 mm and has 2 copper layers, 1.6 mm thick.
47 parts, built around the AMS1117-3.3 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the akirasan/esp8266_multiusos repository on GitHub, at the commit this page was made from: the board is esp8266_01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).