

RequiemXTX
RequiemXT is Custom wired USB game controller with dual Hall-effect joysticks, 14 buttons.
- Size
- 69.3 × 62.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 23
- Pads
- 89
- Tracks, vias
- 133, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 5 Oct 2026
- Updated
- 23 Oct 2026
Overview
RequiemXTX is an open-source printed circuit board by Adityachavhan339, from the Adityachavhan339/RequiemXT repository on GitHub. It is a 2-layer board of 69.3 × 62.8 mm with 17 parts on 23 nets, routed with 133 tracks and 3 vias.
It is built around the RP2040-ZERO. Its parts include 14 switches and 2 connectors. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
1README
README.mdRequiemXT 🎮
RequiemXT is Custom Wired USB Controller.
The Parts I Am Using:
- Waveshare RP2040-Zero Raspberry Pi MCU With Pre Soldered Header
- USB-C wired connection
- Electronic Spices 6 X 6 X 5mm Blue Color Touch Transient Horn Type Push Button Switch Pack of 20pcs
- Jumper Wire Female From Female (40 pcs)
- Robocraze PS2 Joystick Module Dual Axis Analog Sensor Push Button Switch
- Custom 2-Layer Controller Carrier Board
- #All Parts Link With Prices Is Available In BOM.csv and md.#
Schematic Image:
PCB Image:
#Why I Made It So It started Because I Hate Analog Triggers , Vibration Motors or Any Unnecessary Bluetooth Battery Type Things ( And I Couldn't Find Good Idea For A Project For Half Life 😓)
BOM
| Item | Qty | Supplier | Cost/item | Total Cost | Link |
|---|---|---|---|---|---|
| Waveshare RP2040-Zero Raspberry Pi MCU With Pre Soldered Header | 1 | Sharvi Electronics | $5.66 | $5.66 | Get It Here |
| Electronic Spices 6 X 6 X 5mm Blue Color Touch Transient Horn Type Push Button Switch Pack of 20pcs | 1 | Amazon | $1.00 | $1.00 | Get It Here |
| Jumper Wire Female From Female (40 pcs) | 1 | Amazon | $1.54 | $1.54 | Buy Now |
| Robocraze PS2 Joystick Module Dual Axis Analog Sensor Push Button Switch | 2 | Amazon | $2.87 | $5.74 | Get It Here |
| Custom 2-Layer Controller Carrier Board | 1 | Zbotic Portal | $9.75 | $9.75 | Get It Here |
HOW THIS WAS MADE
The schematic and PCB were made in KiCad.
- First, I added the RP2040 to KiCad since it isn't included in the default libraries (the RP2040 ZIP file is available in the PCB design files directory).
- I added all the buttons. Because there are no triggers or bumpers, the button count increased to 14 instead of the standard 12.
- The PCB was routed using the Freerouting plugin in KiCad.
##FIRMWARE
I Never Have Wrote Firmware nor anything in C so still working on it. Though I Will Upload A Compatible Opensource Firmware for anyone who doesn't want to use what i will write 😅( Don't Use it i don't even know what i am going to do)
AI DISCLOSURE
AI Didn't Made It, I Made It. AI Was Only Used For Understanding How KiCad Works
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | BUTTON_A | Button_Switch_THT:SW_NKK_GW12LJP | SW1 |
| 1 | BUTTON_B | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | BUTTON_LB | Button_Switch_THT:SW_PUSH_6mm | SW11 |
| 1 | BUTTON_LT | Button_Switch_THT:SW_PUSH_6mm | SW13 |
| 1 | BUTTON_RB | Button_Switch_THT:SW_PUSH_6mm | SW12 |
| 1 | BUTTON_RT | Button_Switch_THT:SW_PUSH_6mm | SW14 |
| 1 | BUTTON_X | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | BUTTON_Y | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | DAPD_LEFT | Button_Switch_THT:SW_PUSH_6mm | SW7 |
| 1 | DAPD_RIGHT | Button_Switch_THT:SW_PUSH_6mm | SW8 |
| 1 | DPAD_DOWN | Button_Switch_THT:SW_PUSH_6mm | SW6 |
| 1 | DPAD_UP | Button_Switch_THT:SW_PUSH_6mm | SW5 |
| 1 | LEFT_JOYSTICK | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | RIGHT_JOYSTICK | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | RP2040-Zero | RP2040-Zero-Kicad-main:RP2040-Zero | RZ1 |
| 1 | SELECT | Button_Switch_THT:SW_PUSH_6mm | SW10 |
| 1 | START | Button_Switch_THT:SW_PUSH_6mm | SW9 |
Similar boards
- 2 layers132.3 × 94.9 mm

- 2 layers321 × 92.3 mm

- 2 layers255.9 × 99.3 mm

Zerosprey42
beekeeb/zerosprey42
Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.
96 parts140 - 2 layers146.3 × 69.5 mm

- 2 layers54 × 64 mm

DonConIOmini
ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers
96 parts66MIT - 2 layers52 × 50 mm

RP2040-TestPatternGenerator VGA
nmur/RP2040-TestPatternGenerator
A simple test pattern generator running on the RP2040 microcontroller
12 parts64GPL-3.0 - 2 layers120 × 40 mm

Buinchiez40
ChrisChrisLoLo/bunchiez40
A pocket keyboard that makes use of mouse switches to achieve a miniscule size
90 parts56GPL-3.0 - 2 layers305.2 × 76.2 mm

Questions
How big is the RequiemXTX PCB?
It measures 69.3 × 62.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RequiemXTX use?
17 parts, built around the RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RequiemXTX KiCad files?
From the Adityachavhan339/RequiemXT repository on GitHub, at the commit this page was made from: the board is PCB Design Files/RequiemXTX.kicad_pcb and its schematic PCB Design Files/RequiemXTX.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RequiemXTX design in my own project?
Its repository states no licence, so its author keeps all rights: ask Adityachavhan339 before reusing the design.