2 layers58.4 × 85.1 mm ТКП-1.30.B-2, the printed circuit board in 3D

ТКП-1.30.B-2

-ТТКРЧПДЛ-

Size: 58.4 × 85.1 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 73
Nets: 38
Pads: 175
Tracks, vias: 381, 6
Pours: 4
Routed: Yes
KiCad: KiCad 5 (file 20171130)
Created: 28 Jun 2020
Updated: 19 Oct 2026

Overview

ТКП-1.30.B-2 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 58.4 × 85.1 mm with 73 parts on 38 nets, routed with 381 tracks and 6 vias.

It is built around the DC-005. Its parts include 25 resistors, 15 capacitors and 3 crystals.

Main components

DC-005
UncategorisedUnknown maker

README

README.md

-ТТКРЧПДЛ- / Тут короче педали

Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Distortion + PCBs

Deep Blue Delay [REV3]

[REV3C]

Gerber

[C]

Schematic

F_Fab

[C] SM

Schematic

F_Fab

[REV3B]

Gerber

[B]

Schematic

F_Fab

B_Fab

[B] SM

Schematic

F_Fab

B_Fab

Distortion + [REV2]

Schematic

F_Fab

Gerber

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

Gerber

[A]

Schematic

F_Fab

[A] SM

Schematic

F_Fab

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1C] / Potentiometer Board [REV1B]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1B] / Potentiometer Board [REV1B]

Gerber (Potentiometer Board)

Good Grief Overdrive [REV1]

[REV1B]

Gerber

[B]

Schematic

F_Fab

[B] SM

Schematic

F_Fab

[REV1A]

Schematic

F_Fab

Gerber

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

Gerber

[B] Down-Tuned

Schematic

F_Fab

[B] Down-Tuned SM

Schematic

F_Fab

[B] Standard-Tuned

Schematic

F_Fab

[B] Standard-Tuned SM

Schematic

F_Fab

[REV1A]

Gerber

[A] Down-Tuned

Schematic

F_Fab

[A] Standard-Tuned

Schematic

F_Fab

Крыса [REV1]

Schematic

F_Fab

Gerber

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Работа с исходными файлами осуществляется в программе KiCad.

Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:

KCL
SBKCL

Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.

Авторы

Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.

Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.

Лицензии

Настоящий репозиторий использует раздельное лицензирование:

Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.
Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.
Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.

Parts

Qty	Value	Footprint	References
5	104	KCL-SM:C-SM-1206	C2, C5, C6, C9, C15
4	103	KCL-SM:R-SM-1206	R2, R10, R15, R24
4	104	KCL-SM:R-SM-1206	R5, R11, R16, R23
4	4148	SBKCL-TH-ML:P-SOD-123-OR-DO-35-V2	VD3, VD4, VD5, VD6
4	474	KCL-SM:R-SM-1206	R6, R12, R17, R22
4	547	KCL-TH-ML:P-TO-92-E-B-C	VT2, VT4, VT6, VT8
4	847	KCL-SM:P-SOT-23-B-E-C	VT1, VT3, VT5, VT7
3	1.0	KCL-VIRTUAL:VFM-1.0-3.0-SL	VFM1, VFM2, VFM3
3	123	KCL-SM:R-SM-1206	R7, R13, R18
3	391	KCL-SM:R-SM-1206	R8, R14, R19
3	471	KCL-SM:C-SM-1206	C4, C8, C11
2	105	KCL-SM:C-SM-1206	C3, C14
2	223	KCL-SM:R-SM-1206	R20, R21
2	683	KCL-SM:C-SM-1206	C7, C10
2	A100K	SBKCL-TH-ML:RPB-18-1x17-1.6-PNL-7.4-2.8	RP1, RP3
2	DI5M3x18	KCL-TH-ML:VMH-STA-DA5-PNL-3.0	VMH1, VMH2
2	PJ-644C	SBKCL-TH-ML:CON-PJ-644C-IN-OR-OUT	XS2, XS3
1	+	KCL-TH-ML:CON-PAD-S-1.0-1.9	X1
1	-	KCL-TH-ML:CON-PAD-S-1.0-1.9	X2
1	0	KCL-SM:R-SM-1206	R1
1	0520	KCL-SM:P-SOD-123	VD2
1	102	KCL-SM:R-SM-1206	R9
1	103	KCL-SM:C-SM-1206	C13
1	105	KCL-SM:R-SM-1206	R3
1	106	KCL-SM:CP-CTSMD-C	C1
1	272	KCL-SM:R-SM-1206	R25
1	332	KCL-SM:C-SM-1206	C12
1	393	KCL-SM:R-SM-1206	R4
1	B013	SBEL:B013_E1	VE1
1	B100K	SBKCL-TH-ML:RPB-18-1x17-1.6-PNL-7.4-2.8	RP2
1	BR-12.7	KCL-VIRTUAL:VLS-BR-P	VLS1
1	COM	KCL-TH-ML:CON-PAD-S-1.0-1.9	X3
1	DC-005	SBKCL-TH-ML:CON-DC-005-9V-OVAL	XS1
1	FYL-5013UWC	KCL-TH-ML:LED-ROUND-05.0-UNI-SH-SPACER-PNL-5.3	HL1
1	PBS-24-302SP	KCL-TH-ML:SW-PBS-24-302SP-2.5-PNL-13.0	SB1
1	PP3	KCL-VIRTUAL:B-PP3-HV	GB1
1	X	SBKCL-TH-ML:P-SOD-123-OR-DO-35-V2	VD1

Questions

How big is the ТКП-1.30.B-2 PCB?

It measures 58.4 × 85.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ТКП-1.30.B-2 use?

73 parts, built around the DC-005. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ТКП-1.30.B-2 KiCad files?

From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.30.B/ТКП-1.30.B-2/ТКП-1.30.B-2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ТКП-1.30.B-2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.

Topics

stompboxes kicad

Project files

Show this board on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/boards/adept666-stompboxes-1-30-b-2" title="ТКП-1.30.B-2 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/boards/adept666-stompboxes-1-30-b-2.jpg" alt="ТКП-1.30.B-2" width="1200" height="900">

A picture that opens the board, for a README

[![ТКП-1.30.B-2](https://pcbkit.io/embed/boards/adept666-stompboxes-1-30-b-2.jpg?size=s)](https://pcbkit.io/boards/adept666-stompboxes-1-30-b-2)

Source

Repository: Adept666/stompboxes
Board file: PCBS-PCAS/ТКП-3.30.B/ТКП-1.30.B-2/ТКП-1.30.B-2.kicad_pcb
Commit: 9a9c1b3
Homepage: vk.com/stompboxes
Licence: Not stated

Similar boards

4 layers87.3 × 56.7 mm
CM4ClusterHat
will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4
240 parts96MIT
2 layers149.9 × 55.9 mm
Pc amplifier
dilshan/arduino-mini-amp
Arduino based stereo audio amplifier system
140 parts67MIT
2 layers99.5 × 75.9 mm
Amp
hack-apollo/hack_amp
50W stereo power amplifier(TPA3116).
79 parts38GPL-3.0
4 layers76 × 100 mm
Chlorine revD
kanengomibako/Chlorine

206 parts11Unlicense
2 layers70 × 57 mm
VFD MQTT
Estylos/VFD-MQTT
Control of a VFD in MQTT with an ESP8266 and Discord.
42 parts2MIT
2 layers78.5 × 60.8 mm
Tachometer
PotatoX/Band_Saw_Conversion
Cheap benchtop wood cutting band saw -> decent metal cutting
64 parts1
2 layers30 × 50 mm
FAN PCB
alexgvg/FAN-PCB
Leiterkarte für FAN Stromverteilung
23 parts
2 layers84.1 × 55 mm
BME280 Project
carlozepeda-SJSU/Arduino-with-temperature-sensor
Designed and built a custom environmental monitoring system using an Arduino Uno R4 to track temperature, humidity, pressure, and power data in real time.
16 parts

Overview

Main components

DC-005

README

-ТТКРЧПДЛ- / Тут короче педали

Big Muff [REV3]

Bass

Bass SM

NYC

NYC SM

Big Muff [REV2]

Bass

NYC

Crumbwave Multiplexer [REV1]

Deep Blue Delay [REV3]

[REV3C]

[C]

[C] SM

[REV3B]

[B]

[B] SM

Distortion + [REV2]

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

[A]

[A] SM

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Main Board [REV1C] / Potentiometer Board [REV1B]

Main Board [REV1B] / Potentiometer Board [REV1B]

Good Grief Overdrive [REV1]

[REV1B]

[B]

[B] SM

[REV1A]

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

[B] Down-Tuned

[B] Down-Tuned SM

[B] Standard-Tuned

[B] Standard-Tuned SM

[REV1A]

[A] Down-Tuned

[A] Standard-Tuned

Крыса [REV1]

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Авторы

Лицензии

Parts

Questions

How big is the ТКП-1.30.B-2 PCB?

What parts does the ТКП-1.30.B-2 use?

Where can I download the ТКП-1.30.B-2 KiCad files?

Can I use the ТКП-1.30.B-2 design in my own project?

More from Adept666/stompboxes

Similar boards