

ТКП-1.37.A-1
-ТТКРЧПДЛ-
- Size
- 58.4 × 81.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 118
- Nets
- 58
- Pads
- 289
- Tracks, vias
- 627, 18
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Jun 2020
- Updated
- 19 Oct 2026
Overview
ТКП-1.37.A-1 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 58.4 × 81.3 mm with 118 parts on 58 nets, routed with 627 tracks and 18 vias.
It is built around the 78L05 and B4B-XH-A.
Main components
278L05
SOT-89-3-20℃~+120℃@(Tj) 1 1.7V 100mA 2mA 30V 40uV 49dB@(120Hz) 5V Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsB4B-XH-A
插件,P=2.5mm,4PUncategorisedJST
README
README.md-ТТКРЧПДЛ- / Тут короче педали
Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Big Muff [REV3]
Bass
Bass SM
NYC
NYC SM
Big Muff [REV2]
Bass
NYC
Crumbwave Multiplexer [REV1]
Deep Blue Delay [REV3]
[REV3C]
[C]
[C] SM
[REV3B]
[B]
[B] SM
Distortion + [REV2]
Edamamer [REV1]
Fishtaur [REV1]
[REV1A]
[A]
[A] SM
Fuzz Factory [REV1]
Main Board [REV1D] / Potentiometer Board [REV1C]
Main Board [REV1C] / Potentiometer Board [REV1B]
Main Board [REV1B] / Potentiometer Board [REV1B]
Good Grief Overdrive [REV1]
[REV1B]
[B]
[B] SM
[REV1A]
Great Depression Phaser [REV1]
Little Angel Chorus [REV1]
Salty Phaser [REV1]
Копка Земли [REV1]
[REV1B]
[B] Down-Tuned
[B] Down-Tuned SM
[B] Standard-Tuned
[B] Standard-Tuned SM
[REV1A]
[A] Down-Tuned
[A] Standard-Tuned
Крыса [REV1]
Тремоло Саши Огородникова [REV1]
[REV1B]
[REV1A]
Требования
Работа с исходными файлами осуществляется в программе KiCad.
Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:
Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.
Авторы
Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.
Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.
Лицензии
Настоящий репозиторий использует раздельное лицензирование:
-
Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.
-
Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.
-
Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.
Parts
118| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 103 | KCL-SM:R-SM-1206 | D.R1, D.R2, D.R3, D.R4, D.R5, D.R6, D.R7, IND.R1, L.R7, OC.R1, PS.R1, PS.R2 |
| 10 | 0 | KCL-SM:R-SM-1206 | DWS.R1, IB.J2, IB.J3, J2, J5, J6, J7, J8, J9, L.R6 |
| 7 | 104 | KCL-SM:C-SM-1206 | D.C2, D.C3, D.C10, IB.C1, OC.C1, OC.C2, PS.C3 |
| 6 | X | KCL-SM:R-SM-1206 | AL.R2, IB.J1, J1, J3, J4, J10 |
| 3 | 1.0 | KCL-VIRTUAL:VFM-1.0-3.0-SL | VFM1, VFM2, VFM3 |
| 3 | 103 | KCL-SM:C-SM-1206 | D.C6, D.C7, L.C1 |
| 3 | 332 | KCL-SM:C-SM-1206 | D.C4, D.C8, D.C9 |
| 3 | 476 | KCL-SM:CP-CTSMD-D | AL.C1, PS.C1, PS.C4 |
| 3 | 476 | KCL-TH-ML:CP-RADIAL-D05.0-P02.0-CLS | AL.C2, PS.C2, PS.C5 |
| 2 | 104 | KCL-SM:R-SM-1206 | L.R1, OC.R2 |
| 2 | 106 | KCL-SM:CP-CTSMD-C | L.C2, L.C3 |
| 2 | 223 | KCL-SM:R-SM-1206 | IB.R2, IB.R4 |
| 2 | 224 | KCL-SM:R-SM-1206 | L.R3, L.R4 |
| 2 | 3904 | KCL-SM:P-SOT-23-B-E-C | AL.VT1, L.VT1 |
| 2 | DI5M3x18 | KCL-TH-ML:VMH-STA-DA5-PNL-3.0 | VMH1, VMH3 |
| 2 | X | KCL-TH-ML:CON-PAD-S-1.0-1.9 | X2, X3 |
| 2 | X | KCL-TH-ML:SW-MTS-102-A2-2.5 | SA1, SA2 |
| 1 | 101 | KCL-SM:R-SM-1206 | AL.R3 |
| 1 | 102 | KCL-SM:C-SM-1206 | D.C5 |
| 1 | 105 | KCL-SM:R-SM-1206 | IB.R1 |
| 1 | 105 | KCL-SM:C-SM-1206 | D.C1 |
| 1 | 1590N1 | SBEL:1590N1_A1 | VE1 |
| 1 | 1590N1 Connector Board | SBKCL-VIRTUAL:XB-1590N1 | XB1 |
| 1 | 222 | KCL-SM:R-SM-1206 | AL.R4 |
| 1 | 333 | KCL-SM:R-SM-1206 | DWS.R2 |
| 1 | 4148 | SBKCL-TH-ML:P-SOD-123-OR-DO-35-V2 | AL.VD1 |
| 1 | 472 | KCL-SM:R-SM-1206 | L.R5 |
| 1 | 473 | KCL-SM:R-SM-1206 | L.R2 |
| 1 | 474 | KCL-SM:R-SM-1206 | IB.R3 |
| 1 | 5532 | KCL-SM:P-SO-08 | IL.D1 |
| 1 | 683 | KCL-SM:R-SM-1206 | AL.R1 |
| 1 | 78L05 | KCL-SM:P-SO-08-OUT-GND-GND-NC-NC-GND-GND-IN | PS.D1 |
| 1 | 8970 | SBKCL-SM:P-SO-16-OR-SO-16W | D.D1 |
| 1 | AL | KCL-TH-ML:TP-1-1.0-1.9 | TP15 |
| 1 | B4B-XH-A | KCL-TH-ML:CON-XH-B4B-A | XP1 |
| 1 | BR-12.7 | KCL-VIRTUAL:VLS-BR | VLS1 |
| 1 | C50K-C50K | SBKCL-TH-ML:RPB-1590N1-18-2x17-OR-2x1x17-1.6-PNL-7.4-2.8 | RPB1 |
| 1 | COM | KCL-TH-ML:TP-6-1.0-1.9 | TP1 |
| 1 | COM | KCL-TH-ML:CON-PAD-S-1.0-1.9 | X1 |
| 1 | DELAY-IN | KCL-TH-ML:TP-3-1.0-1.9 | TP12 |
| 1 | DELAY-OUT | KCL-TH-ML:TP-2-1.0-1.9 | TP16 |
| 1 | DELAY-REF | KCL-TH-ML:TP-1-1.0-1.9 | TP14 |
| 1 | DWS.J1 | KCL-SM:J-SB-0805-2 | DWS.J1 |
| 1 | DWS.J2 | KCL-SM:J-SB-0805-2 | DWS.J2 |
| 1 | DWS.J3 | KCL-SM:J-SB-0805-2 | DWS.J3 |
| 1 | DWS.J4 | KCL-SM:J-SB-0805-2 | DWS.J4 |
| 1 | FYL-5013UWC | KCL-TH-ML:LED-ROUND-05.0-UNI-SH-SPACER-PNL-5.3 | HL1 |
| 1 | IB-IN | KCL-TH-ML:TP-2-1.0-1.9 | TP6 |
| 1 | IB-OUT | KCL-TH-ML:TP-3-1.0-1.9 | TP11 |
| 1 | IN | KCL-TH-ML:TP-2-1.0-1.9 | TP5 |
| 1 | LFO-B-IN | KCL-TH-ML:TP-2-1.0-1.9 | TP8 |
| 1 | LFO-B-OUT | KCL-TH-ML:TP-2-1.0-1.9 | TP9 |
| 1 | LFO-OUT | KCL-TH-ML:TP-1-1.0-1.9 | TP10 |
| 1 | LFO-VREF | KCL-TH-ML:TP-1-1.0-1.9 | TP7 |
| 1 | OC-IN1 | KCL-TH-ML:TP-2-1.0-1.9 | TP13 |
| 1 | OC-IN2 | KCL-TH-ML:TP-2-1.0-1.9 | TP17 |
| 1 | OC-OUT | KCL-TH-ML:TP-2-1.0-1.9 | TP18 |
| 1 | OC.J1 | KCL-SM:J-SB-0805-2 | OC.J1 |
| 1 | OC.J2 | KCL-SM:J-SB-0805-2 | OC.J2 |
| 1 | OC.J3 | KCL-SM:J-SB-0805-2 | OC.J3 |
| 1 | OC.J4 | KCL-SM:J-SB-0805-2 | OC.J4 |
| 1 | OC.J5 | KCL-SM:J-SB-0805-2 | OC.J5 |
| 1 | OUT | KCL-TH-ML:TP-2-1.0-1.9 | TP19 |
| 1 | PBS-24-302SP | KCL-TH-ML:SW-PBS-24-302SP-2.5-PNL-13.0 | SB1 |
| 1 | V | KCL-TH-ML:TP-3-1.0-1.9 | TP2 |
| 1 | VA | KCL-TH-ML:TP-3-1.0-1.9 | TP3 |
| 1 | VREF | KCL-TH-ML:TP-3-1.0-1.9 | TP4 |
| 1 | X | KCL-SM:CP-CTSMD-C | DWS.C1 |
| 1 | X | KCL-TH-ML:VMH-STA-DA5 | VMH2 |
More from Adept666/stompboxes
12- 2 layers86.4 × 111.8 mm

- 2 layers86.4 × 111.8 mm

- 2 layers58.4 × 81.3 mm

- 2 layers58.4 × 81.3 mm

- 2 layers58.4 × 109.2 mm

- 2 layers58.4 × 109.2 mm

- 2 layers58.4 × 109.2 mm

- 2 layers86.4 × 95.3 mm

- 2 layers86.4 × 95.3 mm

- 2 layers58.4 × 85.1 mm

- 2 layers58.4 × 85.1 mm

- 2 layers58.4 × 85.1 mm

Similar boards
- 4 layers158 × 95 mm

FHNW Pro4E FS19T8-3DPrinterBoard STM32
mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32
Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)
264 parts17GPL-3.0 - 4 layers50 × 80 mm

ARGOS DEMO
CNES/argos-demo-board
Demo board designed to use the ARRIBADA SMD module via USB to send ARGOS messages to the Kineis constellation.
91 parts7CERN-OHL-S-2.0 - 2 layers42 × 42 mm

LoadcellSensor
jujojujo2003/Ender-3-3DPrinter-Load-Cell-Bed-Leveling-Sensor
This is a Load Cell based bed leveling sensor based on the RP2040 and TI ADS1235 ADC that should mount onto any vertical MGN12H gantry. My printer is an Ender 3 with a bunch of linear rail mods.
56 parts5MIT - 4 layers40 × 52.5 mm

VAL3000
Valar-Systems/valar-motion
The easiest, fastest, cheapest, and safest way to spin a stepper motor wirelessly. Valar Motion is a family of tiny Wi-Fi stepper controllers built around a Trinamic TMC2209 driver — precisely control a motor's…
61 parts3 - 2 layers90 × 70 mm

FumeXsense wx2
0xEBD/fumeXsense
The idea behind fumeXsense is simple: understand what the Weller WX2 is doing via its serial interface and use that information to control the existing fume extractor automatically.
39 parts2 - 4 layers80 × 40 mm

Tuner time
SG295/ece477_guitartuner
Automatic Guitar Tuner Project for ECE477 (Senior Design) @ Purdue University
112 parts2 - 4 layers97 × 105.5 mm

STARDRIVE SHIELD V1 0
themarcolab/Stardrive-Shield
With STARDRIVE SHIELD you can implement from 6 step to FOC motor control algorithms.
193 parts2 - 4 layers40 × 52.5 mm

VAL3100
Valar-Systems/VAL3100
The VAL3100 is now part of the Valar Motion mono-repo, alongside the VAL3000 and VAL3101 controllers:
67 parts2CERN-OHL-S-2.0
Questions
How big is the ТКП-1.37.A-1 PCB?
It measures 58.4 × 81.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ТКП-1.37.A-1 use?
118 parts, built around the 78L05 and B4B-XH-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ТКП-1.37.A-1 KiCad files?
From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.39.A/ТКП-1.37.A-1/ТКП-1.37.A-1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ТКП-1.37.A-1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.