2 layers86.4 × 111.8 mm ТКП-1.23.B-1, the printed circuit board in 3D

ТКП-1.23.B-1

-ТТКРЧПДЛ-

Size: 86.4 × 111.8 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 214
Nets: 120
Pads: 557
Tracks, vias: 1,430, 74
Pours: 2
Routed: Yes
KiCad: KiCad 5 (file 20171130)
Created: 28 Jun 2020
Updated: 19 Oct 2026

Overview

ТКП-1.23.B-1 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 86.4 × 111.8 mm with 214 parts on 120 nets, routed with 1,430 tracks and 74 vias.

It is built around the DC-005.

Main components

DC-005
UncategorisedUnknown maker

README

README.md

-ТТКРЧПДЛ- / Тут короче педали

Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Distortion + PCBs

Deep Blue Delay [REV3]

[REV3C]

Gerber

[C]

Schematic

F_Fab

[C] SM

Schematic

F_Fab

[REV3B]

Gerber

[B]

Schematic

F_Fab

B_Fab

[B] SM

Schematic

F_Fab

B_Fab

Distortion + [REV2]

Schematic

F_Fab

Gerber

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

Gerber

[A]

Schematic

F_Fab

[A] SM

Schematic

F_Fab

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1C] / Potentiometer Board [REV1B]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1B] / Potentiometer Board [REV1B]

Gerber (Potentiometer Board)

Good Grief Overdrive [REV1]

[REV1B]

Gerber

[B]

Schematic

F_Fab

[B] SM

Schematic

F_Fab

[REV1A]

Schematic

F_Fab

Gerber

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

Gerber

[B] Down-Tuned

Schematic

F_Fab

[B] Down-Tuned SM

Schematic

F_Fab

[B] Standard-Tuned

Schematic

F_Fab

[B] Standard-Tuned SM

Schematic

F_Fab

[REV1A]

Gerber

[A] Down-Tuned

Schematic

F_Fab

[A] Standard-Tuned

Schematic

F_Fab

Крыса [REV1]

Schematic

F_Fab

Gerber

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Работа с исходными файлами осуществляется в программе KiCad.

Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:

KCL
SBKCL

Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.

Авторы

Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.

Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.

Лицензии

Настоящий репозиторий использует раздельное лицензирование:

Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.
Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.
Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.

Topics

stompboxes kicad

Project files

Show this board on your page

https://pcbkit.io/boards/Adept666/stompboxes

The board's own page, for a message or a post.

Source

Repository: Adept666/stompboxes
Board file: PCBS-PCAS/ТКП-3.23.B/ТКП-1.23.B-1/ТКП-1.23.B-1.kicad_pcb
Commit: 9a9c1b3
Homepage: vk.com/stompboxes
Licence: Not stated

Parts

214

Qty	Value	Footprint	References
69	X	KCL-SM:R-SM-1206	A.R1, A.R2, A.R3, A.R4, A.R5, A.R6, A.R7, A.R8, A.R9, A.R10, B.R1, B.R2, B.R3, B.R4, B.R5, B.R10 +53
15	103	KCL-SM:R-SM-1206	C.R3, C.R5, C.R8, C.R10, D.R3, D.R5, D.R8, D.R10, IB.R1, IND.R1, L.R7, L.R8, L.R10, PS.R1, PS.R2
12	X	KCL-SM:C-SM-1206	A.C1, A.C2, B.C1, B.C2, E.C1, E.C2, F.C1, F.C2, FB.C1, FB.C2, L.C5, L.C7
11	X	KCL-TH-ML:CON-PAD-S-1.0-1.9	X1, X3, X4, X5, X6, X7, X8, X9, X10, X11, X12
8	273	KCL-SM:R-SM-1206	C.R1, C.R4, C.R6, C.R9, D.R1, D.R4, D.R6, D.R9
7	0	KCL-SM:R-SM-1206	FB.J1, FB.J2, L.R4, MS.R5, OM.J2, ST.J3, ST.J5
6	DI5M3x18	KCL-TH-ML:VMH-STA-DA5-PNL-3.0	VMH1, VMH2, VMH3, VMH4, VMH5, VMH6
5	X	KCL-SM:CP-CTSMD-C	L.C2, L.C4, L.C6, L.C8, PS.C6
5	X	KCL-SM:R-SM-2512	MS.R3, MS.R4, MS.R7, MS.R8, MS.R10
4	182	KCL-SM:R-SM-1206	C.R2, C.R7, D.R2, D.R7
4	332	KCL-SM:C-SM-1206	C.C1, C.C2, D.C1, D.C2
4	X	KCL-SM:P-SO-16	A.D1, B.D1, E.D1, F.D1
3	1.0	KCL-VIRTUAL:VFM-1.0-3.0-DL	VFM1, VFM2, VFM3
3	364	KCL-SM:R-SM-1206	L.R1, L.R2, L.R5
3	X	KCL-VIRTUAL:VLS-BR-P	VLS2, VLS3, VLS4
3	X	KCL-TH-ML:LED-ROUND-05.0-UNI-SH-SPACER	HL2, HL3, HL4
2	13700	KCL-SM:P-SO-16	C.D1, D.D1
2	4558	KCL-SM:P-SO-08	IO.D1, L.D1
2	473	KCL-SM:R-SM-1206	OM.R1, OM.R2
2	ST-008S-05	SBKCL-TH-ML:CON-ST-008X-04-OR-ST-008X-05-IN-OR-OUT-OVAL	XS2, XS3
2	X	KCL-SM:P-SOD-87	PS.VD3, PS.VD4
1	0520	KCL-SM:P-SOD-123	PS.VD1
1	104	KCL-SM:C-SM-1206	PS.C3
1	105	KCL-SM:R-SM-1206	IB.R2
1	106	KCL-SM:CP-CTSMD-C	PS.C4
1	106	KCL-TH-ML:CP-RADIAL-D05.0-P02.0-CLS	PS.C5
1	107	SBKCL-TH-ML:CP-RADIAL-D05.0-P02.0-CLS-OR-D06.3-P02.5-CLS-OR-D08.0-P03.5-CLS	PS.C2
1	107	KCL-SM:CP-CTSMD-D	PS.C1
1	154	KCL-SM:R-SM-1206	L.R3
1	221	KCL-SM:R-SM-1206	MS.R9
1	2612	KCL-SM:R-SM-1206	OM.R3
1	2612	KCL-SM:R-SM-0805	OM.R4
1	301	KCL-SM:R-SM-1206	MS.R1
1	472	KCL-SM:C-SM-1206	IB.C1
1	473	KCL-SM:C-SM-1206	OM.C1
1	474	KCL-SM:C-SM-1206	L.C1
1	475	KCL-SM:C-SM-1206	L.C3
1	5817	KCL-TH-ML:P-DO-41	PS.VD2
1	620	KCL-SM:R-SM-1206	MS.R2
1	622	KCL-SM:R-SM-1206	L.R9
1	B500K-A1K-B100K	SBKCL-TH-ML:RPB-1590BB-18-3x17-1.6-PNL-7.2	RPB1
1	BR-12.7	KCL-VIRTUAL:VLS-BR-P	VLS1
1	COM	KCL-TH-ML:TP-4-1.0-1.9	TP1
1	COM	KCL-TH-ML:TP-3-1.0-1.9	TP2
1	COM	KCL-TH-ML:CON-PAD-S-1.0-1.9	X2
1	DC-005	SBKCL-TH-ML:CON-DC-005-9V-OVAL	XS1
1	DRY	KCL-TH-ML:TP-2-1.0-1.9	TP6
1	FYL-5013UWC	KCL-TH-ML:LED-ROUND-05.0-UNI-SH-SPACER-PNL-5.3	HL1
1	IN	KCL-TH-ML:TP-2-1.0-1.9	TP5
1	LFO-A	KCL-TH-ML:TP-2-1.0-1.9	TP8
1	LFO-M	KCL-TH-ML:TP-2-1.0-1.9	TP9
1	LFO-SQR	KCL-TH-ML:TP-1-1.0-1.9	TP7
1	MTS-202-A2	KCL-TH-ML:SW-MTS-202-A2-3.0-PNL-6.0	SA2
1	OUT	KCL-TH-ML:TP-2-1.0-1.9	TP10
1	PBS-24-302SP	KCL-TH-ML:SW-PBS-24-302SP-2.5-PNL-12.0	SB1
1	V	KCL-TH-ML:TP-6-1.0-1.9	TP3
1	VREF	KCL-TH-ML:TP-3-1.0-1.9	TP4
1	X	SBKCL-TH-ML:RPB-1590BB-18-2x17-1.6	RPB2
1	X	KCL-SM:P-SO-08-IN-OUT-OUT-ADJ-NC-OUT-OUT-NC	PS.D1
1	X	KCL-TH-ML:SW-MTS-202-A2-3.0	SA3
1	X	KCL-TH-ML:SW-RBS-1-2P6W-VP	SA1
1	ТКП-6.1.1.A1.B1.A.1-1	SBEPL:ТКП-6.1.1.A1.B1.A	VE1
1	ТКП-6.1.3.A2.D1.2-1.D1.E1	SBEPL:ТКП-6.1.3.A2	VE2

Similar boards

4 layers87.3 × 56.7 mm
CM4ClusterHat
will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4
240 parts96MIT
2 layers149.9 × 55.9 mm
Pc amplifier
dilshan/arduino-mini-amp
Arduino based stereo audio amplifier system
140 parts67MIT
2 layers99.5 × 75.9 mm
Amp
hack-apollo/hack_amp
50W stereo power amplifier(TPA3116).
79 parts38GPL-3.0
4 layers76 × 100 mm
Chlorine revD
kanengomibako/Chlorine

206 parts11Unlicense
2 layers70 × 57 mm
VFD MQTT
Estylos/VFD-MQTT
Control of a VFD in MQTT with an ESP8266 and Discord.
42 parts2MIT
2 layers78.5 × 60.8 mm
Tachometer
PotatoX/Band_Saw_Conversion
Cheap benchtop wood cutting band saw -> decent metal cutting
64 parts1
2 layers30 × 50 mm
FAN PCB
alexgvg/FAN-PCB
Leiterkarte für FAN Stromverteilung
23 parts
2 layers84.1 × 55 mm
BME280 Project
carlozepeda-SJSU/Arduino-with-temperature-sensor
Designed and built a custom environmental monitoring system using an Arduino Uno R4 to track temperature, humidity, pressure, and power data in real time.
16 parts

Questions

How big is the ТКП-1.23.B-1 PCB?

It measures 86.4 × 111.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ТКП-1.23.B-1 use?

214 parts, built around the DC-005. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ТКП-1.23.B-1 KiCad files?

From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.23.B/ТКП-1.23.B-1/ТКП-1.23.B-1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ТКП-1.23.B-1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.

Overview

Main components

DC-005

README

-ТТКРЧПДЛ- / Тут короче педали

Big Muff [REV3]

Bass

Bass SM

NYC

NYC SM

Big Muff [REV2]

Bass

NYC

Crumbwave Multiplexer [REV1]

Deep Blue Delay [REV3]

[REV3C]

[C]

[C] SM

[REV3B]

[B]

[B] SM

Distortion + [REV2]

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

[A]

[A] SM

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Main Board [REV1C] / Potentiometer Board [REV1B]

Main Board [REV1B] / Potentiometer Board [REV1B]

Good Grief Overdrive [REV1]

[REV1B]

[B]

[B] SM

[REV1A]

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

[B] Down-Tuned

[B] Down-Tuned SM

[B] Standard-Tuned

[B] Standard-Tuned SM

[REV1A]

[A] Down-Tuned

[A] Standard-Tuned

Крыса [REV1]

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Авторы

Лицензии

Parts

More from Adept666/stompboxes

Similar boards

Questions

How big is the ТКП-1.23.B-1 PCB?

What parts does the ТКП-1.23.B-1 use?

Where can I download the ТКП-1.23.B-1 KiCad files?

Can I use the ТКП-1.23.B-1 design in my own project?