Skip to the content
2 layers86.4 × 111.8 mmТКП-1.23.A-1, the printed circuit board in 3D

ТКП-1.23.A-1

Adept666/stompboxes10

-ТТКРЧПДЛ-

Size
86.4 × 111.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
160
Nets
105
Pads
421
Tracks, vias
912, 68
Pours
5
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
28 Jun 2020
Updated
19 Oct 2026

Overview

ТКП-1.23.A-1 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 86.4 × 111.8 mm with 160 parts on 105 nets, routed with 912 tracks and 68 vias.

It is built around the DC-005.

Main components

1

README

README.md

-ТТКРЧПДЛ- / Тут короче педали

Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Distortion + PCBs

Big Muff [REV3]

Gerber

Bass

Schematic

F_Fab

B_Fab

Bass SM

Schematic

F_Fab

B_Fab

NYC

Schematic

F_Fab

B_Fab

NYC SM

Schematic

F_Fab

B_Fab

Big Muff [REV2]

Gerber

Bass

Schematic

F_Fab

B_Fab

NYC

Schematic

F_Fab

B_Fab

Crumbwave Multiplexer [REV1]

Schematic

F_Fab

B_Fab

Gerber

Deep Blue Delay [REV3]

[REV3C]

Gerber

[C]

Schematic

F_Fab

[C] SM

Schematic

F_Fab

[REV3B]

Gerber

[B]

Schematic

F_Fab

B_Fab

[B] SM

Schematic

F_Fab

B_Fab

Distortion + [REV2]

Schematic

F_Fab

Gerber

Edamamer [REV1]

Schematic

F_Fab

B_Fab

Gerber

Fishtaur [REV1]

[REV1A]

Gerber

[A]

Schematic

F_Fab

[A] SM

Schematic

F_Fab

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1C] / Potentiometer Board [REV1B]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1B] / Potentiometer Board [REV1B]

Schematic

F_Fab

B_Cuts

B_Jumpers

Gerber (Main Board)

Gerber (Potentiometer Board)

Good Grief Overdrive [REV1]

[REV1B]

Gerber

[B]

Schematic

F_Fab

[B] SM

Schematic

F_Fab

[REV1A]

Schematic

F_Fab

Gerber

Great Depression Phaser [REV1]

Schematic

F_Fab

B_Fab

Gerber

Little Angel Chorus [REV1]

Schematic

F_Fab

B_Fab

Gerber

Salty Phaser [REV1]

Schematic

F_Fab

B_Fab

F_Cuts

B_Cuts

F_Jumpers

B_Jumpers

Gerber

Копка Земли [REV1]

[REV1B]

Gerber

[B] Down-Tuned

Schematic

F_Fab

[B] Down-Tuned SM

Schematic

F_Fab

[B] Standard-Tuned

Schematic

F_Fab

[B] Standard-Tuned SM

Schematic

F_Fab

[REV1A]

Gerber

[A] Down-Tuned

Schematic

F_Fab

[A] Standard-Tuned

Schematic

F_Fab

Крыса [REV1]

Schematic

F_Fab

Gerber

Тремоло Саши Огородникова [REV1]

[REV1B]

Schematic

F_Fab

B_Fab

Gerber

[REV1A]

Schematic

F_Fab

B_Fab

F_Cuts

B_Cuts

B_Jumpers

Gerber

Требования

Работа с исходными файлами осуществляется в программе KiCad.

Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:

Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.

Авторы

Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.

Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.

Лицензии

Настоящий репозиторий использует раздельное лицензирование:

  • Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.

  • Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.

  • Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.

Parts

160
QtyValueFootprintReferences
45XKCL-SM:R-SM-1206A.R1, A.R2, A.R3, A.R4, A.R5, A.R6, A.R7, A.R8, A.R9, A.R10, B.R1, B.R2, B.R3, B.R4, B.R5, B.R10 +29
15103KCL-SM:R-SM-1206C.R3, C.R5, C.R8, C.R10, D.R3, D.R5, D.R8, D.R10, IB.R1, L.R5, L.R6, L.R8, PS.R1, PS.R2, R1
10XKCL-SM:C-SM-1206A.C1, A.C2, B.C1, B.C2, E.C1, E.C2, F.C1, F.C2, FB.C1, FB.C2
8273KCL-SM:R-SM-1206C.R1, C.R4, C.R6, C.R9, D.R1, D.R4, D.R6, D.R9
8TOPKCL-VIRTUAL:VJVJ2.1, VJ2.2, VJ6.1, VJ6.2, VJ7.1, VJ7.2, VJ8.1, VJ8.2
6BOTTOMKCL-VIRTUAL:VJVJ1.1, VJ1.2, VJ3.1, VJ3.2, VJ3.3, VJ3.4
6DI5M3x18KCL-TH-ML:VMH-STA-DA5-PNL-3.0VMH1, VMH2, VMH3, VMH4, VMH5, VMH6
4182KCL-SM:R-SM-1206C.R2, C.R7, D.R2, D.R7
4332KCL-SM:C-SM-1206C.C1, C.C2, D.C1, D.C2
4XKCL-SM:P-SO-16A.D1, B.D1, E.D1, F.D1
3364KCL-SM:R-SM-1206L.R1, L.R3, L.R4
3BOTTOMKCL-VIRTUAL:VTCVTC1, VTC2, VTC3
3XKCL-TH-ML:LED-ROUND-05.0-UNI-SH-SPACER-PNL-5.3HL2, HL3, HL4
3XKCL-VIRTUAL:VLS-BRVLS2, VLS3, VLS4
213700KCL-SM:P-SO-16C.D1, D.D1
24558KCL-SM:P-SO-08IO.D1, L.D1
2473KCL-VIRTUAL:R-SM-0805*R1, *R2
2ST-008S-05SBKCL-TH-ML:CON-ST-008X-04-OR-ST-008X-05XS2, XS3
1104KCL-SM:C-SM-1206PS.C2
1105KCL-SM:R-SM-1206IB.R2
1106KCL-TH-SL:CP-RADIAL-D05.0-P02.0-CLSPS.C3
1107SBKCL-TH-SL:CP-RADIAL-D05.0-P02.0-CLS-OR-D06.3-P02.5-CLS-OR-D08.0-P03.5-CLSPS.C1
1154KCL-SM:R-SM-1206L.R2
11590BBSBEL:1590BB_B1VE1
12612KCL-VIRTUAL:R-SM-0805*R3
1331KCL-SM:R-SM-1206MS.R1
1470KCL-SM:R-SM-1206MS.R3
1472KCL-SM:C-SM-1206IB.C1
1473KCL-SM:C-SM-1206OM.C1
1474KCL-SM:C-SM-1206L.C1
1475KCL-TH-SL:CP-RADIAL-D05.0-P02.0-CLSL.C2
15817KCL-TH-ML:P-DO-41PS.VD1
1622KCL-SM:R-SM-1206L.R7
1680KCL-SM:R-SM-1206MS.R2
1B500K-A1K-B100KSBKCL-TH-ML:RPB-1590BB-18-3x17-1.5-PNL-7.4-2.8RPB1
1BR-12.7KCL-VIRTUAL:VLS-BRVLS1
1COMKCL-TH-SL:CON-PAD-S-1.0-1.9X2
1COMKCL-TH-ML:CON-PAD-S-1.0-1.9X1
1DC-005KCL-TH-ML:CON-DC-005XS1
1FYL-5013UWCKCL-TH-ML:LED-ROUND-05.0-UNI-SH-SPACER-PNL-5.3HL1
1MTS-202-A2KCL-TH-ML:SW-MTS-202-A2-3.0-PNL-6.0SA2
1PBS-24-302SPKCL-TH-ML:SW-PBS-24-302SP-2.5-PNL-13.0SB1
1TOPKCL-VIRTUAL:VTCVTC4
1XKCL-TH-SL:SW-RBS-1-2P6W-VP-PNL-9.5SA1
1XSBKCL-TH-ML:RPB-1590BB-18-2x17-1.5-PNL-7.4-2.8RPB2
1XKCL-TH-ML:SW-MTS-202-A2-3.0-PNL-6.0SA3
1XKCL-TH-SL:CON-PAD-S-1.0-1.9X3
1ТКП-6.1.4.A1.A1.2-1.A1SBEPL:ТКП-6.1.4.A1.A1VE2

More from Adept666/stompboxes

12
  • 2 layers86.4 × 111.8 mmТКП-1.23.B-1, the printed circuit board in 3D

    ТКП-1.23.B-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    214 parts10
  • 2 layers58.4 × 81.3 mmТКП-1.38.A-2, the printed circuit board in 3D

    ТКП-1.38.A-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    122 parts10
  • 2 layers58.4 × 81.3 mmТКП-1.38.A-1, the printed circuit board in 3D

    ТКП-1.38.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    121 parts10
  • 2 layers58.4 × 81.3 mmТКП-1.37.A-1, the printed circuit board in 3D

    ТКП-1.37.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    118 parts10
  • 2 layers58.4 × 109.2 mmТКП-1.36.A-3, the printed circuit board in 3D

    ТКП-1.36.A-3

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    94 parts10
  • 2 layers58.4 × 109.2 mmТКП-1.36.A-5, the printed circuit board in 3D

    ТКП-1.36.A-5

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    94 parts10
  • 2 layers58.4 × 109.2 mmТКП-1.36.A-2, the printed circuit board in 3D

    ТКП-1.36.A-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    93 parts10
  • 2 layers86.4 × 95.3 mmТКП-1.21.A-2, the printed circuit board in 3D

    ТКП-1.21.A-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    82 parts10
  • 2 layers86.4 × 95.3 mmТКП-1.21.A-1, the printed circuit board in 3D

    ТКП-1.21.A-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    81 parts10
  • 2 layers58.4 × 85.1 mmТКП-1.17.C-2, the printed circuit board in 3D

    ТКП-1.17.C-2

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    76 parts10
  • 2 layers58.4 × 85.1 mmТКП-1.17.C-1, the printed circuit board in 3D

    ТКП-1.17.C-1

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    75 parts10
  • 2 layers58.4 × 85.1 mmТКП-1.30.B-3, the printed circuit board in 3D

    ТКП-1.30.B-3

    Adept666/stompboxes

    -ТТКРЧПДЛ-

    74 parts10

Similar boards

  • 4 layers87.3 × 56.7 mmCM4ClusterHat, the printed circuit board in 3D

    CM4ClusterHat

    will127534/Miniature-CM4-Cluster

    A dense cluster for four Raspberry Pi Compute Module 4

    240 parts96MIT
  • 2 layers149.9 × 55.9 mmPc amplifier, the printed circuit board in 3D

    Pc amplifier

    dilshan/arduino-mini-amp

    Arduino based stereo audio amplifier system

    140 parts67MIT
  • 2 layers99.5 × 75.9 mmAmp, the printed circuit board in 3D

    Amp

    hack-apollo/hack_amp

    50W stereo power amplifier(TPA3116).

    79 parts38GPL-3.0
  • 4 layers76 × 100 mmChlorine revD, the printed circuit board in 3D

    Chlorine revD

    kanengomibako/Chlorine

    206 parts11Unlicense
  • 2 layers70 × 57 mmVFD MQTT, the printed circuit board in 3D

    VFD MQTT

    Estylos/VFD-MQTT

    Control of a VFD in MQTT with an ESP8266 and Discord.

    42 parts2MIT
  • 2 layers78.5 × 60.8 mmTachometer, the printed circuit board in 3D

    Tachometer

    PotatoX/Band_Saw_Conversion

    Cheap benchtop wood cutting band saw -> decent metal cutting

    64 parts1
  • 2 layers30 × 50 mmFAN PCB, the printed circuit board in 3D

    FAN PCB

    alexgvg/FAN-PCB

    Leiterkarte für FAN Stromverteilung

    23 parts
  • 2 layers84.1 × 55 mmBME280 Project, the printed circuit board in 3D

    BME280 Project

    carlozepeda-SJSU/Arduino-with-temperature-sensor

    Designed and built a custom environmental monitoring system using an Arduino Uno R4 to track temperature, humidity, pressure, and power data in real time.

    16 parts

Questions

How big is the ТКП-1.23.A-1 PCB?

It measures 86.4 × 111.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ТКП-1.23.A-1 use?

160 parts, built around the DC-005. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ТКП-1.23.A-1 KiCad files?

From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.23.A/ТКП-1.23.A-1/ТКП-1.23.A-1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ТКП-1.23.A-1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.