2 layers58.4 × 81.3 mm ТКП-1.38.A-2, the printed circuit board in 3D

ТКП-1.38.A-2

-ТТКРЧПДЛ-

Size: 58.4 × 81.3 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 122
Nets: 66
Pads: 324
Tracks, vias: 818, 31
Pours: 3
Routed: Yes
KiCad: KiCad 5 (file 20171130)
Created: 28 Jun 2020
Updated: 19 Oct 2026

Overview

ТКП-1.38.A-2 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 58.4 × 81.3 mm with 122 parts on 66 nets, routed with 818 tracks and 31 vias.

It is built around the B4B-XH-A.

Main components

B4B-XH-A
插件,P=2.5mm,4PUncategorisedJST

README

README.md

-ТТКРЧПДЛ- / Тут короче педали

Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Distortion + PCBs

Deep Blue Delay [REV3]

[REV3C]

Gerber

[C]

Schematic

F_Fab

[C] SM

Schematic

F_Fab

[REV3B]

Gerber

[B]

Schematic

F_Fab

B_Fab

[B] SM

Schematic

F_Fab

B_Fab

Distortion + [REV2]

Schematic

F_Fab

Gerber

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

Gerber

[A]

Schematic

F_Fab

[A] SM

Schematic

F_Fab

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1C] / Potentiometer Board [REV1B]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1B] / Potentiometer Board [REV1B]

Gerber (Potentiometer Board)

Good Grief Overdrive [REV1]

[REV1B]

Gerber

[B]

Schematic

F_Fab

[B] SM

Schematic

F_Fab

[REV1A]

Schematic

F_Fab

Gerber

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

Gerber

[B] Down-Tuned

Schematic

F_Fab

[B] Down-Tuned SM

Schematic

F_Fab

[B] Standard-Tuned

Schematic

F_Fab

[B] Standard-Tuned SM

Schematic

F_Fab

[REV1A]

Gerber

[A] Down-Tuned

Schematic

F_Fab

[A] Standard-Tuned

Schematic

F_Fab

Крыса [REV1]

Schematic

F_Fab

Gerber

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Работа с исходными файлами осуществляется в программе KiCad.

Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:

KCL
SBKCL

Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.

Авторы

Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.

Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.

Лицензии

Настоящий репозиторий использует раздельное лицензирование:

Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.
Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.
Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.

Topics

stompboxes kicad

Project files

Show this board on your page

https://pcbkit.io/boards/Adept666/stompboxes/PCBS-PCAS/%D0%A2%D0%9A%D0%9F-3.40.A/%D0%A2%D0%9A%D0%9F-1.38.A-2/%D0%A2%D0%9A%D0%9F-1.38.A-2.kicad_pcb

The board's own page, for a message or a post.

Source

Repository: Adept666/stompboxes
Board file: PCBS-PCAS/ТКП-3.40.A/ТКП-1.38.A-2/ТКП-1.38.A-2.kicad_pcb
Commit: 9a9c1b3
Homepage: vk.com/stompboxes
Licence: Not stated

Parts

122

Qty	Value	Footprint	References
16	0	KCL-SM:R-SM-1206	A.R3, A.R8, B.R3, B.R8, J2, J3, J4, J5, J6, J7, J8, J9, J11, J13, J14, L.R3
16	X	KCL-SM:R-SM-1206	FB.R1, FB.R3, J1, J10, J12, L.R1, L.R2, LB.R1, LB.R2, LB.R3, LB.R4, LB.R5, LB.R6, LB.R7, LB.R8, LB.R9
12	273	KCL-SM:R-SM-1206	A.R1, A.R4, A.R6, A.R9, B.R1, B.R4, B.R6, B.R9, FB.R2, FB.R4, OM.R1, OM.R2
9	103	KCL-SM:R-SM-1206	A.R5, A.R10, B.R5, B.R10, IND.R1, LA.R4, LA.R6, PS.R1, PS.R2
4	182	KCL-SM:R-SM-1206	A.R2, A.R7, B.R2, B.R7
4	332	KCL-SM:C-SM-1206	A.C1, A.C2, B.C1, B.C2
3	1.0	KCL-VIRTUAL:VFM-1.0-3.0-DL	VFM1, VFM2, VFM3
3	105	KCL-SM:C-SM-1206	FB.C1, FB.C2, OM.C1
3	13700	KCL-SM:P-SO-16	A.D1, B.D1, LA.D1
3	X	KCL-SM:CP-CTSMD-C	LA.C3, LB.C2, LB.C4
2	274	KCL-SM:R-SM-1206	LA.R1, LA.R3
2	4148	KCL-SM:P-SOD-123	IB.VD1, IB.VD2
2	DI5M3x18	KCL-TH-ML:VMH-STA-DA5-PNL-3.0	VMH1, VMH2
2	X	KCL-SM:C-SM-1206	LB.C1, LB.C3
1	101	KCL-SM:C-SM-1206	IB.C1
1	102	KCL-SM:R-SM-1206	IB.R1
1	103	KCL-SM:C-SM-1206	IB.C2
1	104	KCL-SM:R-SM-1206	LA.R2
1	106	KCL-SM:CP-CTSMD-C	PS.C1
1	153	KCL-SM:R-SM-1206	OM.R3
1	154	KCL-SM:R-SM-1206	OM.R4
1	1590N1 Connector Board	SBKCL-VIRTUAL:XB-1590N1	XB1
1	335	KCL-SM:C-SM-1206	LA.C2
1	4558	KCL-SM:P-SO-08	IO.D1
1	473	KCL-SM:C-SM-1206	LA.C1
1	474	KCL-SM:R-SM-1206	IB.R2
1	682	KCL-SM:R-SM-1206	LA.R5
1	A-I	KCL-TH-ML:TP-2-1.0-1.9	TP7
1	A-O	KCL-TH-ML:TP-2-1.0-1.9	TP8
1	B-I	KCL-TH-ML:TP-2-1.0-1.9	TP9
1	B-O	KCL-TH-ML:TP-2-1.0-1.9	TP10
1	B4B-XH-A	KCL-TH-ML:CON-XH-B4B-A	XP1
1	B50K-B50K	SBKCL-TH-ML:RPB-1590N1-18-2x17-OR-2x1x17-1.6-PNL-7.2	RPB1
1	BR-9.52	KCL-VIRTUAL:VLS-BR	VLS1
1	COM	KCL-TH-ML:TP-7-1.0-1.9	TP1
1	FB-I	KCL-TH-ML:TP-2-1.0-1.9	TP17
1	FB-O	KCL-TH-ML:TP-2-1.0-1.9	TP18
1	FYL-5013UWC	KCL-TH-ML:LED-ROUND-05.0-UNI-SH-SPACER-PNL-6.6	HL1
1	IB-I	KCL-TH-ML:TP-2-1.0-1.9	TP5
1	IB-O	KCL-TH-ML:TP-3-1.0-1.9	TP6
1	IN	KCL-TH-ML:TP-2-1.0-1.9	TP4
1	LA-O	KCL-TH-ML:TP-2-1.0-1.9	TP15
1	LB-O	KCL-TH-ML:TP-2-1.0-1.9	TP16
1	OM-D	KCL-TH-ML:TP-2-1.0-1.9	TP11
1	OM-O	KCL-TH-ML:TP-2-1.0-1.9	TP13
1	OM-W	KCL-TH-ML:TP-2-1.0-1.9	TP12
1	OUT	KCL-TH-ML:TP-2-1.0-1.9	TP14
1	PBS-24-302SP	KCL-TH-ML:SW-PBS-24-302SP-2.5-PNL-12.0	SB1
1	V	KCL-TH-ML:TP-6-1.0-1.9	TP2
1	VREF	KCL-TH-ML:TP-5-1.0-1.9	TP3
1	X	KCL-SM:P-SO-08	LB.D1
1	X	KCL-TH-ML:CON-PAD-S-1.0-1.9	X1
1	X	SBKCL-TH-ML:RP-EXTERNAL	RP01
1	ТКП-6.2.1.A1.A1.A.1-1	SBEPL:ТКП-6.2.1.A1.A1.A	VE1
1	ТКП-6.2.4.A1.B1.4-1.A2.B1	SBEPL:ТКП-6.2.4.A1	VE2

Similar boards

4 layers158 × 95 mm
FHNW Pro4E FS19T8-3DPrinterBoard STM32
mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32
Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)
264 parts17GPL-3.0
4 layers50 × 80 mm
ARGOS DEMO
CNES/argos-demo-board
Demo board designed to use the ARRIBADA SMD module via USB to send ARGOS messages to the Kineis constellation.
91 parts7CERN-OHL-S-2.0
2 layers42 × 42 mm
LoadcellSensor
jujojujo2003/Ender-3-3DPrinter-Load-Cell-Bed-Leveling-Sensor
This is a Load Cell based bed leveling sensor based on the RP2040 and TI ADS1235 ADC that should mount onto any vertical MGN12H gantry. My printer is an Ender 3 with a bunch of linear rail mods.
56 parts5MIT
4 layers40 × 52.5 mm
VAL3000
Valar-Systems/valar-motion
The easiest, fastest, cheapest, and safest way to spin a stepper motor wirelessly. Valar Motion is a family of tiny Wi-Fi stepper controllers built around a Trinamic TMC2209 driver — precisely control a motor's…
61 parts3
2 layers90 × 70 mm
FumeXsense wx2
0xEBD/fumeXsense
The idea behind fumeXsense is simple: understand what the Weller WX2 is doing via its serial interface and use that information to control the existing fume extractor automatically.
39 parts2
4 layers80 × 40 mm
Tuner time
SG295/ece477_guitartuner
Automatic Guitar Tuner Project for ECE477 (Senior Design) @ Purdue University
112 parts2
4 layers97 × 105.5 mm
STARDRIVE SHIELD V1 0
themarcolab/Stardrive-Shield
With STARDRIVE SHIELD you can implement from 6 step to FOC motor control algorithms.
193 parts2
4 layers40 × 52.5 mm
VAL3100
Valar-Systems/VAL3100
The VAL3100 is now part of the Valar Motion mono-repo, alongside the VAL3000 and VAL3101 controllers:
67 parts2CERN-OHL-S-2.0

Questions

How big is the ТКП-1.38.A-2 PCB?

It measures 58.4 × 81.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ТКП-1.38.A-2 use?

122 parts, built around the B4B-XH-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ТКП-1.38.A-2 KiCad files?

From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.40.A/ТКП-1.38.A-2/ТКП-1.38.A-2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ТКП-1.38.A-2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.

Overview

Main components

B4B-XH-A

README

-ТТКРЧПДЛ- / Тут короче педали

Big Muff [REV3]

Bass

Bass SM

NYC

NYC SM

Big Muff [REV2]

Bass

NYC

Crumbwave Multiplexer [REV1]

Deep Blue Delay [REV3]

[REV3C]

[C]

[C] SM

[REV3B]

[B]

[B] SM

Distortion + [REV2]

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

[A]

[A] SM

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Main Board [REV1C] / Potentiometer Board [REV1B]

Main Board [REV1B] / Potentiometer Board [REV1B]

Good Grief Overdrive [REV1]

[REV1B]

[B]

[B] SM

[REV1A]

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

[B] Down-Tuned

[B] Down-Tuned SM

[B] Standard-Tuned

[B] Standard-Tuned SM

[REV1A]

[A] Down-Tuned

[A] Standard-Tuned

Крыса [REV1]

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Авторы

Лицензии

Parts

More from Adept666/stompboxes

Similar boards

Questions

How big is the ТКП-1.38.A-2 PCB?

What parts does the ТКП-1.38.A-2 use?

Where can I download the ТКП-1.38.A-2 KiCad files?

Can I use the ТКП-1.38.A-2 design in my own project?