2 layers58.4 × 109.2 mm ТКП-1.36.A-3, the printed circuit board in 3D

ТКП-1.36.A-3

-ТТКРЧПДЛ-

Size: 58.4 × 109.2 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 94
Nets: 52
Pads: 245
Tracks, vias: 436, 12
Pours: 2
Routed: Yes
KiCad: KiCad 5 (file 20171130)
Created: 28 Jun 2020
Updated: 19 Oct 2026

Overview

ТКП-1.36.A-3 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 58.4 × 109.2 mm with 94 parts on 52 nets, routed with 436 tracks and 12 vias.

It is built around the DC-005. Its parts include 7 connectors and 1 crystal.

Main components

DC-005
UncategorisedUnknown maker

README

README.md

-ТТКРЧПДЛ- / Тут короче педали

Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Distortion + PCBs

Deep Blue Delay [REV3]

[REV3C]

Gerber

[C]

Schematic

F_Fab

[C] SM

Schematic

F_Fab

[REV3B]

Gerber

[B]

Schematic

F_Fab

B_Fab

[B] SM

Schematic

F_Fab

B_Fab

Distortion + [REV2]

Schematic

F_Fab

Gerber

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

Gerber

[A]

Schematic

F_Fab

[A] SM

Schematic

F_Fab

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1C] / Potentiometer Board [REV1B]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1B] / Potentiometer Board [REV1B]

Gerber (Potentiometer Board)

Good Grief Overdrive [REV1]

[REV1B]

Gerber

[B]

Schematic

F_Fab

[B] SM

Schematic

F_Fab

[REV1A]

Schematic

F_Fab

Gerber

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

Gerber

[B] Down-Tuned

Schematic

F_Fab

[B] Down-Tuned SM

Schematic

F_Fab

[B] Standard-Tuned

Schematic

F_Fab

[B] Standard-Tuned SM

Schematic

F_Fab

[REV1A]

Gerber

[A] Down-Tuned

Schematic

F_Fab

[A] Standard-Tuned

Schematic

F_Fab

Крыса [REV1]

Schematic

F_Fab

Gerber

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Работа с исходными файлами осуществляется в программе KiCad.

Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:

KCL
SBKCL

Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.

Авторы

Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.

Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.

Лицензии

Настоящий репозиторий использует раздельное лицензирование:

Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.
Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.
Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.

Topics

stompboxes kicad

Project files

Show this board on your page

https://pcbkit.io/boards/Adept666/stompboxes/PCBS-PCAS/%D0%A2%D0%9A%D0%9F-3.38.A/%D0%A2%D0%9A%D0%9F-1.36.A-3/%D0%A2%D0%9A%D0%9F-1.36.A-3.kicad_pcb

The board's own page, for a message or a post.

Source

Repository: Adept666/stompboxes
Board file: PCBS-PCAS/ТКП-3.38.A/ТКП-1.36.A-3/ТКП-1.36.A-3.kicad_pcb
Commit: 9a9c1b3
Homepage: vk.com/stompboxes
Licence: Not stated
Copies: 2 copies in 1 repository

Parts

Qty	Value	Footprint	References
7	0	KCL-SM:R-SM-1206	J2, J3, J4, J5, J6, J7, J8
7	103	KCL-SM:R-SM-1206	IB.R3, IB.R5, IB.R6, IND.R1, OB.R1, OB.R2, OB.R3
6	B50K	SBKCL-TH-ML:RPB-18-1x17-1.6-PNL-7.2	RP1, RP2, RP3, RP4, RP5, RP6
4	102	KCL-SM:R-SM-1206	C.R2, D.R2, E.R2, IB.R4
4	104	KCL-SM:R-SM-1206	B.R1, C.R1, D.R1, E.R1
4	4558	KCL-SM:P-SO-08	AB.D1, CD.D1, EF.D1, IO.D1
4	X	KCL-SM:R-SM-1206	F.R1, F.R2, J1, J9
3	1.0	KCL-VIRTUAL:VFM-1.0-3.0-SL	VFM1, VFM2, VFM3
3	103	KCL-SM:C-SM-1206	IB.C1, IB.C2, OB.C2
2	105	KCL-SM:C-SM-1206	B.C1, OB.C1
2	471	KCL-SM:R-SM-1206	A.R2, B.R2
2	473	KCL-SM:R-SM-1206	PS.R1, PS.R2
2	DI5M3x20	KCL-TH-ML:VMH-STA-DA5-PNL-3.0	VMH1, VMH2
2	PJ-644C	SBKCL-TH-ML:CON-PJ-644C-IN-OR-OUT	XS2, XS3
2	X	KCL-SM:C-SM-1206	F.C1, F.C2
1	0520	SBKCL-TH-ML:P-SOD-123-OR-DO-41	PS.VD1
1	104	KCL-SM:C-SM-1206	PS.C3
1	107	KCL-SM:CP-CTSMD-D	PS.C1
1	107	KCL-TH-ML:CP-RADIAL-D05.0-P02.0-CLS	PS.C2
1	124	KCL-SM:R-SM-1206	A.R1
1	151	KCL-SM:C-SM-1206	IB.C3
1	154	KCL-SM:C-SM-1206	C.C1
1	223	KCL-SM:C-SM-1206	E.C1
1	225	KCL-SM:R-SM-1206	IB.R1
1	225	KCL-SM:C-SM-1206	A.C1
1	332	KCL-SM:C-SM-1206	D.C2
1	333	KCL-SM:C-SM-1206	B.C2
1	473	KCL-SM:C-SM-1206	A.C2
1	474	KCL-SM:R-SM-1206	IB.R2
1	476	KCL-TH-ML:CP-RADIAL-D05.0-P02.0-CLS	PS.C5
1	476	KCL-SM:CP-CTSMD-D	PS.C4
1	681	KCL-SM:C-SM-1206	E.C2
1	682	KCL-SM:C-SM-1206	C.C2
1	683	KCL-SM:C-SM-1206	D.C1
1	BOOST-RAIL	KCL-TH-ML:TP-2-1.0-1.9	TP8
1	BR-17.8	KCL-VIRTUAL:VLS-BR	VLS1
1	COM	KCL-TH-ML:TP-5-1.0-1.9	TP1
1	CUT-RAIL	KCL-TH-ML:TP-2-1.0-1.9	TP7
1	DC-005	SBKCL-TH-ML:CON-DC-005-9V-OVAL	XS1
1	FYL-5013UWC	KCL-TH-ML:LED-ROUND-05.0-UNI-SH-SPACER-PNL-5.3	HL1
1	IB-IN	KCL-TH-ML:TP-2-1.0-1.9	TP5
1	IB-OUT	KCL-TH-ML:TP-3-1.0-1.9	TP6
1	IN	KCL-TH-ML:TP-2-1.0-1.9	TP4
1	OB-INN	KCL-TH-ML:TP-2-1.0-1.9	TP10
1	OB-INP	KCL-TH-ML:TP-2-1.0-1.9	TP9
1	OB-OUT	KCL-TH-ML:TP-2-1.0-1.9	TP11
1	OUT	KCL-TH-ML:TP-2-1.0-1.9	TP13
1	PBS-24-302SP	KCL-TH-ML:SW-PBS-24-302SP-2.5-PNL-12.0	SB1
1	V	KCL-TH-ML:TP-4-1.0-1.9	TP2
1	VOL-OUT	KCL-TH-ML:TP-2-1.0-1.9	TP12
1	VREF	KCL-TH-ML:TP-4-1.0-1.9	TP3
1	X	SBKCL-TH-ML:RP-EXTERNAL	RP7
1	X	KCL-TH-ML:CON-PAD-S-1.0-1.9	X1
1	ТКП-6.3.1.A1.B1.A.1-1	SBEPL:ТКП-6.3.1.A1.B1.A	VE1
1	ТКП-6.3.3.A2.B1.3-1.B1.D1	SBEPL:ТКП-6.3.3.A2	VE2

Similar boards

4 layers87.3 × 56.7 mm
CM4ClusterHat
will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4
240 parts96MIT
2 layers149.9 × 55.9 mm
Pc amplifier
dilshan/arduino-mini-amp
Arduino based stereo audio amplifier system
140 parts67MIT
2 layers99.5 × 75.9 mm
Amp
hack-apollo/hack_amp
50W stereo power amplifier(TPA3116).
79 parts38GPL-3.0
4 layers76 × 100 mm
Chlorine revD
kanengomibako/Chlorine

206 parts11Unlicense
2 layers70 × 57 mm
VFD MQTT
Estylos/VFD-MQTT
Control of a VFD in MQTT with an ESP8266 and Discord.
42 parts2MIT
2 layers78.5 × 60.8 mm
Tachometer
PotatoX/Band_Saw_Conversion
Cheap benchtop wood cutting band saw -> decent metal cutting
64 parts1
2 layers30 × 50 mm
FAN PCB
alexgvg/FAN-PCB
Leiterkarte für FAN Stromverteilung
23 parts
2 layers84.1 × 55 mm
BME280 Project
carlozepeda-SJSU/Arduino-with-temperature-sensor
Designed and built a custom environmental monitoring system using an Arduino Uno R4 to track temperature, humidity, pressure, and power data in real time.
16 parts

Questions

How big is the ТКП-1.36.A-3 PCB?

It measures 58.4 × 109.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ТКП-1.36.A-3 use?

94 parts, built around the DC-005. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ТКП-1.36.A-3 KiCad files?

From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.38.A/ТКП-1.36.A-3/ТКП-1.36.A-3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ТКП-1.36.A-3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.

Overview

Main components

DC-005

README

-ТТКРЧПДЛ- / Тут короче педали

Big Muff [REV3]

Bass

Bass SM

NYC

NYC SM

Big Muff [REV2]

Bass

NYC

Crumbwave Multiplexer [REV1]

Deep Blue Delay [REV3]

[REV3C]

[C]

[C] SM

[REV3B]

[B]

[B] SM

Distortion + [REV2]

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

[A]

[A] SM

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Main Board [REV1C] / Potentiometer Board [REV1B]

Main Board [REV1B] / Potentiometer Board [REV1B]

Good Grief Overdrive [REV1]

[REV1B]

[B]

[B] SM

[REV1A]

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

[B] Down-Tuned

[B] Down-Tuned SM

[B] Standard-Tuned

[B] Standard-Tuned SM

[REV1A]

[A] Down-Tuned

[A] Standard-Tuned

Крыса [REV1]

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Авторы

Лицензии

Parts

More from Adept666/stompboxes

Similar boards

Questions

How big is the ТКП-1.36.A-3 PCB?

What parts does the ТКП-1.36.A-3 use?

Where can I download the ТКП-1.36.A-3 KiCad files?

Can I use the ТКП-1.36.A-3 design in my own project?