Skip to the content
2 layers85 × 45 mmDrone tranceiver, the printed circuit board in 3D

Drone tranceiver

adeboni/electronics

This repository stores code for various electronics projects I've made

Size
85 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
44
Nets
58
Pads
168
Tracks, vias
259, 24
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
26 Jun 2019
Updated
19 Nov 2025

Overview

Drone tranceiver is an open-source printed circuit board by adeboni, from the adeboni/electronics repository on GitHub. It is a 2-layer board of 85 × 45 mm with 44 parts on 58 nets, routed with 259 tracks and 24 vias.

It is built around the MCP41010-E/P, 1N4148W and MMBT3904. Its parts include 13 connectors, 12 capacitors, 7 ICs, 3 resistors and 2 diodes. It belongs with the robots and motor control boards of this library.

Main components

3

README

README.md

This repository stores code for various electronics projects I've made

  • Wasp Cannon: A wifi-enabled water cannon for shooting water at wasps on my balcony
  • CV Glove: A glove with flex sensors on fingers that output control voltages for eurorack modules
  • Critter Coat: A coat with fluttering butterflies on it
  • AQI Monitor: Simple air quality monitor using a Honeywell HPM sensors
  • Atari Controller: Custom Atari 2600 controller with an analog joystick
  • Camera Remote: Wireless camera shutter control
  • Gas Sensor: A generic MQ gas sensor board with LED indicators
  • PS2 Drone Controller: Lets you control quadcopters with a Bluetooth PS2 controller
  • WH24 Rachio Adapter: A 915 MHz radio that can receive and parse packets from an Ambient Weather Station and control the rain sensor input on a Rachio irrigation controller
  • Scrubotron: A tape head amplifier for use with tape head wands
  • Mega Trackball: Adapter PCBs for a bowling-ball sized trackball mouse
  • Reverb Pedal: Custom reverb guitar pedal based on a PT2399
  • Looper Pedal: Custom looper guitar pedal based on an ISD1000 series voice recorder

Parts

44
QtyValueFootprintReferences
11Conn_01x01Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_VerticalJ1, J2, J5, J6, J7, J8, J9, J10, J11, J12, J13
70.1uCapacitor_SMD:C_0603_1608MetricC4, C5, C6, C7, C8, C9, C11
6MCP41010Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2, U3, U4, U5, U6, U7
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottomH1, H2, H3, H4
21kResistor_SMD:R_0603_1608MetricR2, R3
222pCapacitor_SMD:C_0603_1608MetricC1, C3
2Conn_01x19Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_VerticalJ3, J4
110Resistor_SMD:R_0603_1608MetricR1
110uCapacitor_SMD:C_0603_1608MetricC10
11N4148WDiode_SMD:D_SOD-123D1
11nCapacitor_SMD:C_0603_1608MetricC2
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1C_Polarized_USCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC12
1Crystal_GND24Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1HS210Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU1
1LEDLED_THT:LED_D3.0mmD2
1MMBT3904Package_TO_SOT_SMD:SOT-23Q1

More from adeboni/electronics

12
  • 2 layers114.3 × 25.4 mmIr transmitter, the printed circuit board in 3D

    Ir transmitter

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    92 parts
  • 2 layers100 × 100 mmIr receiver, the printed circuit board in 3D

    Ir receiver

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    89 parts
  • 2 layers100 × 62 mmLooper, the printed circuit board in 3D

    Looper

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    63 parts
  • 2 layers50 × 40 mmAlien screamer, the printed circuit board in 3D

    Alien screamer

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    55 parts
  • 2 layers100 × 42 mmDelay reverb, the printed circuit board in 3D

    Delay reverb

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    46 parts
  • 2 layersTape jar, the printed circuit board in 3D

    Tape jar

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    28 parts
  • 2 layers23.1 × 51 mmAw rachio adapter, the printed circuit board in 3D

    Aw rachio adapter

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    20 parts
  • 2 layers52 × 52 mmFiat light relay, the printed circuit board in 3D

    Fiat light relay

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    11 parts
  • 2 layers60 × 60 mmEncoder controller, the printed circuit board in 3D

    Encoder controller

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    10 parts
  • 2 layers58 × 20 mmDrum trigger adapter, the printed circuit board in 3D

    Drum trigger adapter

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    7 parts
  • 2 layers30.8 × 12.2 mmDc dc jack converter, the printed circuit board in 3D

    Dc dc jack converter

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    5 parts
  • 2 layers34 × 22.5 mmTape jar fp, the printed circuit board in 3D

    Tape jar fp

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    4 parts

Similar boards

  • 2 layers124 × 112 mmOpenDropV3, the printed circuit board in 3D

    OpenDropV3

    GaudiLabs/OpenDrop

    Open Source Digital Microfluidics Bio Lab

    318 parts492GPL-3.0
  • 2 layers169.3 × 128 mmPSU PCB, the printed circuit board in 3D

    PSU PCB

    ThomasVDD/SmartSupply

    SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.

    134 parts96
  • 2 layers50 × 100 mmPSU PCB, the printed circuit board in 3D

    PSU PCB

    ThomasVDD/SmartSupplyMini

    118 parts16
  • 2 layers57.2 × 57.2 mmRocketBeaconModule, the printed circuit board in 3D

    RocketBeaconModule

    explosion33/ArmLabRadio_PCB

    KiCad files for CC1200 based 2m / 70cm radio

    96 parts4
  • 2 layers63.5 × 31.8 mmLucid, the printed circuit board in 3D

    Lucid

    breadboardbasics/Lucid

    Everything that deals with my Lucid Dreaming project

    41 parts2MIT
  • 4 layers77 × 83 mmGeoMCU, the printed circuit board in 3D

    GeoMCU

    NohPei/GeoMCU

    Integrated Geophone Boards with programmable gain and an onboard MCU. Can be used over WiFi or wired with an external ADC.

    80 parts2CERN-OHL-P-2.0
  • 2 layers100 × 117 mmBHV Badge, the printed circuit board in 3D

    BHV Badge

    biomurph/BioVill_Badge

    DEFCON Micro Fluidics Badge Design For Biohacking Village

    270 parts1MIT
  • 2 layers101.5 × 55.8 mmSilverZap, the printed circuit board in 3D

    SilverZap

    hanebuechenes/SilverZap

    Generator für kolloidales SIlber / Gold nach Dr. Beck

    40 parts1GPL-3.0

Questions

How big is the Drone tranceiver PCB?

It measures 85 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Drone tranceiver use?

44 parts, built around the MCP41010-E/P, 1N4148W and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Drone tranceiver KiCad files?

From the adeboni/electronics repository on GitHub, at the commit this page was made from: the board is ps2_drone_controller/hardware/drone_tranceiver/drone_tranceiver.kicad_pcb and its schematic alien_screamer/alien_screamer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Drone tranceiver design in my own project?

Its repository states no licence, so its author keeps all rights: ask adeboni before reusing the design.