Skip to the content

Boards by adamatom

3 boards

Open-source boards designed in KiCad by adamatom on GitHub, from 1 repository. A board’s address here is its repository’s there.

  • 4 layers86.4 × 54.6 mmChewtoy, the printed circuit board in 3D

    Chewtoy

    adamatom/chewtoy

    This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins

    37 partsCC0-1.0
  • 2 layers28.1 × 14.1 mmTemp probe, the printed circuit board in 3D

    Temp probe

    adamatom/chewtoy

    This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins

    18 partsCC0-1.0
  • 2 layers36.1 × 23.6 mmTemp probe (copy), the printed circuit board in 3D

    Temp probe (copy)

    adamatom/chewtoy

    This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins

    16 partsCC0-1.0