
EnchantiS3
aburt2/EnchantiS3
Repository for the hardware and firmware files for the EnchantiS3 board

firmware and hardware files for the enchantiW106
EnchantiW106 is an open-source printed circuit board by aburt2, from the aburt2/enchantiW106 repository on GitHub. It is a 2-layer board of 62.2 × 25.4 mm with 66 parts on 139 nets, routed with 530 tracks and 74 vias.
It is built around the MMC5633NJL, BQ25185DLHR and ICM-42670-P, with the MAX17262REWL+T, USBLC6-2P6 and B3U-1000P among its other parts. Its parts include 20 resistors, 19 capacitors, 9 ICs, 2 switches and 1 connector.
firmware and hardware files for the enchantiW106
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C6, C7, C15, C18, C19 |
| 7 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R8, R10, R14, R16, R18 |
| 7 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C9, C11, C12, C17, C22 |
| 7 | 2k2 | Resistor_SMD:R_0402_1005Metric | R3, R4, R9, R12, R13, R19, R20 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C13, C21, C23 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R21 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | B3U-1000P | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 2 | CONN HEADER SMD 2POS 1MM | ENCHANTI_connectors:Molex_Pico-Clasp_2pin_Vertical | ANG1, ANG3 |
| 2 | NCP167AMX330TBG | ENCHANTI_regulators:XDFN4_1X1_711AJ_ONS | U4, U9 |
| 1 | 0.43k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 0.47uF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 13k | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 220nF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | BQ25185DLHR | ENCHANTI_battery-management:WSON10_DLH_TEX | U12 |
| 1 | CONN HEADER SMD 6POS 1MM | Connector_Molex:Molex_Pico-Clasp_501331-0807_1x08-1MP_P1.00mm_Vertical | FP2 |
| 1 | CP2102N-Axx-xQFN20 | Package_DFN_QFN:SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U5 |
| 1 | GENERAL STATUS | LED_SMD:LED_0402_1005Metric | STATLED2 |
| 1 | ICM-42670-P | ENCHANTI_MEMS:LGA14_2P5X3X0P91_TDK | U13 |
| 1 | IRIS-W106-00B | ENCHANTI_WiFi:IRIS-W106 | U3 |
| 1 | JST-PH-1x02-2.000mm | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | BT1 |
| 1 | JST-SH-1x04 1.0mm | ENCHANTI_connectors:JST_SMD_1.0mm-4_Vertical | TOUCH1 |
| 1 | LAYOUT | ENCHANTI_enchanti-board-symbols:enchantiS3-layout | BOARDLAYOUT1 |
| 1 | MAX17262REWL+T | ENCHANTI_battery-management:MAX17262 | U11 |
| 1 | MMC5633NJL | Package_BGA:WLP-4_0.86x0.86mm_P0.4mm | U2 |
| 1 | RX_STAT | LED_SMD:LED_0402_1005Metric | STATLED4 |
| 1 | S1 | LED_SMD:LED_0402_1005Metric | CHARGLED1 |
| 1 | TX_STAT | LED_SMD:LED_0402_1005Metric | STATLED3 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | WIFISTATUS | LED_SMD:LED_0402_1005Metric | STATLED1 |

aburt2/EnchantiS3
Repository for the hardware and firmware files for the EnchantiS3 board

thePunderWoman/SnipsControllers
The controllers built to work with Amidala


golioth/elixir-hw
An open source hardware device that has cellular, wifi, bluetooth, GPS, and more!

Kmshanley/PicoSat-Initiative
The pocket cube standard requires satellites to be 5x5x5cm and under 250 grams. Upon completion of this Wentworth PicoSat it will become one of the smallest satellites capable of high resolution imagery from LEO.

Brazil-L/Lumeward-OpenSource
Open-source Lumeward firmware and development tools

Pioneer-Rocketry/Flight-Computer
Pioneer Rocketry’s latest generation flight computer for high power, STM32-based avionics system designed for experimental high-power rockets.

Architeuthis-Flux/Arraybia
A 16x16 LED matrix with a bunch of sensors I made a few years ago
It measures 62.2 × 25.4 mm and has 2 copper layers, 1.71 mm thick.
66 parts, built around the MMC5633NJL, BQ25185DLHR, ICM-42670-P and MAX17262REWL+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the aburt2/enchantiW106 repository on GitHub, at the commit this page was made from: the board is enchantiW106-board/enchantiW106.kicad_pcb and its schematic enchantiW106-board/enchantiW106.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask aburt2 before reusing the design.