4 layers55.9 × 25.4 mm EnchantiS3, the printed circuit board in 3D

EnchantiS3

Repository for the hardware and firmware files for the EnchantiS3 board

Size: 55.9 × 25.4 mm
Copper layers: 4
Thickness: 1.71 mm
Parts: 68
Nets: 83
Pads: 301
Tracks, vias: 523, 100
Pours: 7
Routed: Yes
KiCad: KiCad 7 (file 20221018)
Created: 30 Mar 2024
Updated: 5 Aug 2026

Overview

EnchantiS3 is an open-source printed circuit board by aburt2, from the aburt2/EnchantiS3 repository on GitHub. It is a 4-layer board of 55.9 × 25.4 mm with 68 parts on 83 nets, routed with 523 tracks and 100 vias.

It is built around the MCP73871EV, MAX17262REWL+T and USBLC6-2P6, with the BSS138, B3U-1000P and ICM-20948 among its other parts. Its parts include 21 resistors, 18 capacitors, 6 ICs, 3 transistors and 2 switches. It belongs with the ESP32 boards of this library.

Main components

README

README.md

EnchantiS3

Repository for hardware and firmware for the EnchantiS3 board. The EnchantiS3 is a board based on the ESP32-S3 WROOM 2 module from Espressif. It includes a fuel gauge and inertial measurement unit (IMU). The board can be powered from both the USB-C port or a 3.7V lithium ion battery.

Category and platform

ESP32

Project files

Show this board on your page

https://pcbkit.io/boards/aburt2/EnchantiS3

The board's own page, for a message or a post.

Source

Repository: aburt2/EnchantiS3
Board file: enchantiS3-board/enchantiS3.kicad_pcb
Commit: 8d0341b
Licence: Not stated

Parts

Qty	Value	Footprint	References
8	1uF	Capacitor_SMD:C_0402_1005Metric	C4, C5, C9, C10, C11, C12, C16, C17
6	1k	Resistor_SMD:R_0402_1005Metric	R1, R3, R8, R10, R22, R24
6	2k2	Resistor_SMD:R_0402_1005Metric	R14, R15, R16, R19, R21, R23
5	0.1uF	Capacitor_SMD:C_0402_1005Metric	C1, C6, C7, C15, C19
3	10k	Resistor_SMD:R_0402_1005Metric	R5, R9, TH1
3	BSS138	Package_TO_SOT_SMD:SOT-23	Q1, Q2, Q3
2	10uF	Capacitor_SMD:C_0603_1608Metric	C13, C14
2	4.7uF	Capacitor_SMD:C_0603_1608Metric	C3, C8
2	5k1	Resistor_SMD:R_0402_1005Metric	R6, R7
2	B3U-1000P	Button_Switch_SMD:SW_SPST_B3U-1000P	SW1, SW2
2	JST-SH-1.00mm 1x2	Connector_JST:JST_SH_BM02B-SRSS-TB_1x02-1MP_P1.00mm_Vertical	ANG1, ANG2
2	JST-SH-1x04 1.0mm	Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical	TOUCH1, TOUCH2
2	MountingHole	MountingHole:MountingHole_3.2mm_M3_DIN965	H1, H2
2	NCP167AMX330TBG	NCP167AMX330TBG-footprints:XDFN4_1X1_711AJ_ONS	U3, U5
1	0.47uF	Capacitor_SMD:C_0402_1005Metric	C2
1	110k	Resistor_SMD:R_0402_1005Metric	R4
1	24.9k	Resistor_SMD:R_0402_1005Metric	R17
1	2k	Resistor_SMD:R_0402_1005Metric	R20
1	330k	Resistor_SMD:R_0402_1005Metric	R18
1	ESP32-S3-WROOM-2	PCM_Espressif:ESP32-S3-WROOM-2	MCU1
1	GENERAL STATUS	LED_SMD:LED_0402_1005Metric	STATLED2
1	ICM-20948	ICM20948-footprints:QFN24_3X3X0P9_IVS	IMU1
1	JST-PH-1x02-2.000mm	Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal	BT1
1	LAYOUT	pin-layout:board-layout	BOARDLAYOUT1
1	LOGO	logos:McGill_logo	G***
1	LOGO	logos:IDMIL_logo	G***
1	MAX17262REWL+T	max17262-footprints:21-100221A_W91G1&plus_3_MXM	U6
1	MCP73871	Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm	U2
1	NCP167AMX180TBG	NCP167AMX330TBG-footprints:XDFN4_1X1_711AJ_ONS	U4
1	PG	LED_SMD:LED_0402_1005Metric	CHARGLED3
1	S1	LED_SMD:LED_0402_1005Metric	CHARGLED1
1	S2	LED_SMD:LED_0402_1005Metric	CHARGLED2
1	USBLC6-2P6	Package_TO_SOT_SMD:SOT-666	U1
1	USB_C_Receptacle_USB2.0	Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal	J1
1	WIFISTATUS	LED_SMD:LED_0402_1005Metric	STATLED1

Similar boards

2 layers62.2 × 25.4 mm
EnchantiW106
aburt2/enchantiW106
firmware and hardware files for the enchantiW106
66 parts1
4 layers89 × 54 mm
OBCProto
Kmshanley/PicoSat-Initiative
The pocket cube standard requires satellites to be 5x5x5cm and under 250 grams. Upon completion of this Wentworth PicoSat it will become one of the smallest satellites capable of high resolution imagery from LEO.
126 parts3GPL-3.0
4 layers105.6 × 104.8 mm
Drone PCB
Eemac/droneSwarm
Code and build log for a PCB quadcopter swarm.
229 parts
4 layers71.5 × 71.5 mm
Elixir
golioth/elixir-hw
An open source hardware device that has cellular, wifi, bluetooth, GPS, and more!
249 parts36CERN-OHL-P-2.0
6 layers57 × 25.9 mm
R7FS7MOD
Brazil-L/Lumeward-OpenSource
Open-source Lumeward firmware and development tools
228 parts2Apache-2.0
6 layers45 × 115 mm
Bozi-1.0.1-dk
mullakrekar69/bozi-1.0.1-dk

229 parts
2 layers23.5 × 37.5 mm
Mk2
jeffc/nrf52-watch-obsolete
obsolete repository - see https://github.com/jeffc/nrf52-watch-firmware
55 parts6
6 layers14.8 × 12.6 mm
Power Board
esl-epfl/X-MODs
Modular hardware platform based on the RISC-V X-HEEP family architecture developed at ESL, targeting ultra-low-power consumption and miniaturization, facilitating the creation of wearable devices for clinical trials
31 parts3

Questions

How big is the EnchantiS3 PCB?

It measures 55.9 × 25.4 mm and has 4 copper layers, 1.71 mm thick.

What parts does the EnchantiS3 use?

68 parts, built around the MCP73871EV, MAX17262REWL+T, USBLC6-2P6 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EnchantiS3 KiCad files?

From the aburt2/EnchantiS3 repository on GitHub, at the commit this page was made from: the board is enchantiS3-board/enchantiS3.kicad_pcb and its schematic enchantiS3-board/enchantiS3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the EnchantiS3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask aburt2 before reusing the design.