Skip to the content
2 layers39.1 × 68.9 mmBaseChipOnly, the printed circuit board in 3D

Smart LED plant pot — ESP32 PCB, WS2812B/SK6812 LEDs, WLED firmware, modular 3D-printed vase, and a native iOS app with Apple's Liquid Glass design.

Size
39.1 × 68.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
52
Pads
135
Tracks, vias
161, 48
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Jun 2026
Updated
26 Oct 2026

Overview

BaseChipOnly is an open-source printed circuit board by ZonatedCord, from the ZonatedCord/Yggdrasill repository on GitHub. It is a 2-layer board of 39.1 × 68.9 mm with 31 parts on 52 nets, routed with 161 tracks and 48 vias.

It is built around the ESP32-WROOM-32U, LM2596S-ADJ and USBLC6-2SC6. Its parts include 3 connectors, 2 ICs and 1 inductor. It belongs with the home automation and IoT boards and the ESP32 and RISC-V boards of this library.

Main components

3

README

PCB/BaseChipOnly_rev2/README.md

BaseChipOnly — HW Rev 2.0

Base board of the Yggdrasill lamp: ESP32-WROOM-32U running WLED, 5 V input, drives the 9 leaf boards (../Foglia, 15 WS2812B each, wired in parallel). This is the second revision of ../BaseChipOnly (rev 1.03, the board that was actually fabricated and brought up).

How the board works, power budget and WLED settings: docs/base-chiponly-pcb.md.

⚠️ Limitation: verified on paper, not on a real board

Rev 2.0 has not been fabricated or assembled yet. Everything below was checked with design-rule tools, file cross-checks and circuit simulation — nothing has been measured on hardware. Simulations use component models (TI's LM2596 model, generic MMBT3904/SS34/LED models) and assumptions (cable resistance, wire length to the leaves, capacitor derating) that may differ from reality. The firmware/boot of the ESP32 cannot be simulated: "it boots" means EN and IO0 reach the right levels at the right time.

Before trusting it, build one board and follow the first power-up procedure in docs/base-chiponly-pcb.md, then test the auto-reset with esptool.py flash_id.

Status

Schematiccomplete, ERC 0 errors
PCBcomplete, DRC 0 errors, schematic ↔ PCB parity clean
Fab filesEsportazione-2026-09-30/ (Gerbers, drill, BOM with MPNs, pick-and-place, assembly PDF with values, schematic PDF, 3D preview)
Fabricatedno
Tested on hardwareno

Tests performed (all theoretical)

TestToolResult
Electrical rules checkKiCad ERC0 errors
Design rules check + schematic parityKiCad DRC --schematic-parity0 errors, 0 unconnected, 0 parity issues (12 known items: 0.2 mm thermal-via drills of the ESP32 footprint, same as rev 1.03)
Copper vs schematicGerber X2 pad attributes of the exported front copper120 / 120 pads on the right net
Pinout of every active part vs datasheetnetlist + datasheets0 mismatches (LM2596S-ADJ, USBLC6-2SC6, MMBT3904, diodes, polarised caps, connectors, ESP32)
ESP32 strapping pinsnetlist reviewIO0 pull-up + BOOT; IO2/IO12 floating (download mode OK, 3.3 V flash); IO5/IO15 internal pull-ups
Trace current capacityIPC-2221, 1 oz outer layer, +10 °Call power traces above their current (e.g. +5V bus 3 mm → 5.3 A for ~3.3 A)
Fab limitsJLCPCB rulestracks ≥ 0.2 mm, vias 0.6/0.3, copper ≥ 1 mm from edge, silkscreen ≥ 0.8 mm / 0.15 mm
Mechanical / visualKiCad 3D renderpolarity marks, orientation, ≥ ~1 mm between parts in the regulator block, ≥ 1.1 mm from the ESP32
Auto-reset (both esptool sequences)ngspiceenters download mode; serial monitor does not reset the board
Power-on EN timingngspiceEN rises 13.7 ms after 3.3 V (spec ≥ 50 µs)
3.3 V regulator: nominal, LEDs at 3 A, minimum input, start-upngspice + Texas Instruments LM2596 model (SNVMA65, credited in LICENSE-NOTICES.md)3.28 V, ≥ 3.21 V worst case; needs ≥ ~4.5 V at its input
Status LED currentngspice4.6–6.7 mA
LED data line to 9 parallel leavesngspiceclean ~370/770 ns pulses with R5 = 100 Ω

Re-run the checks with ./verifica.sh (ERC + DRC/parity + fab export + Gerber cross-check). Simulations: simulazioni/README.md (run simulazioni/models/get_lm2596_model.sh once to fetch the TI model).

Changes from rev 1.03

Bugs fixed (all seen during the rev 1.03 bring-up)

Rev 1.03Rev 2.0
D2 (SS34 catch diode) reversed — shorts the regulator switch nodecorrect polarity, silkscreen matches
D1 (status LED) reversedcorrect polarity; GND via moved out of the pad (likely cause of the dark LED)
Auto-reset wired wrong: both emitters to GND — idle adapter held the ESP32 in reset, esptool could never enter download modestandard cross-coupled DTR/RTS circuit, like ESP32 DevKit boards
No BOOT / RESET buttonsSW1 BOOT, SW2 RESET (C&K PTS810), centred on the top edge
L1 1008 inductor, no value — burned outBourns SRN6045TA-101M, 100 µH, Isat 1.33 A
Polyfuse 12 A in 0603 — protects nothingBourns MF-LSMF400/12X, 4 A hold, 2920
U3 (USBLC6) GND pin unconnected — no ESD protectionGND connected, VBUS to +5V (ST reference circuit)
TVS: bidirectional symbol, SMF5.0A part on an SMA footprintSMAJ5.0A, unidirectional, matches the footprint
Reference and Value swapped on the PCB, footprints not linked to the schematicfixed: correct BOM / pick-and-place, Update-PCB-from-Schematic works
12 ESP32 thermal vias with no nettied to GND
Silkscreen typo "GDN""GND"

Improvements

  • COUT2 220 µF tantalum (Kyocera AVX TPSC227M006R0100) next to the 47 µF MLCC, for LM2596 loop stability.
  • C4 100 nF → 1 µF (EN delay, Espressif guideline) — from the simulations.
  • R5 470 Ω → 100 Ω (clean data pulses to the 9 parallel leaves) — from the simulations.
  • Auto-reset transistors specified as MMBT3904 (no part number before).
  • +3V3 traces 0.2 → 0.5–1.0 mm; SW node 1.2–1.5 mm.
  • New layout: functional blocks, regulator with a short switching loop and room for hand soldering, solid GND plane on the back, no via-in-pad on GND, silkscreen to fab minimums, HW Rev 2.0 printed on the board.

Unchanged on purpose: board outline and mounting holes (the printed base and TasselloFissaggioPCB.stl still fit), J1 barrel jack, J2 terminal, J3 programming header (external USB-UART adapter, no USB-C), ESP32 position, C1, LED data on GPIO13.

Known limits

  • The LM2596 needs ≥ ~4.5 V at its input at 500 mA: use a good 5 V 4 A PSU with a short, thick cable and keep the WLED current limiter at 3000 mA.
  • The USB-UART adapter must break out DTR and RTS at 3.3 V for the auto-reset; otherwise use BOOT/RESET.
  • Button reachability inside the printed base not checked.

Folder contents

PathWhat
BaseChipOnly.kicad_pro/.kicad_sch/.kicad_pcbKiCad 9 project
Esportazione-2026-09-30/fabrication files for rev 2.0
verifica.shall automatic checks in one go
simulazioni/ngspice decks, plots, results
FIX_LOG.mdsession-by-session log of every change (Italian)
BaseChipOnly-backups/fixpcb_2026-09-30.py, relayout-work/relayout.py, build.shscripts that generated the PCB (record of every edit; their input boards live in the local, git-ignored BaseChipOnly-backups/)
FileImpronte/ESP32-WROOM-32U symbol / footprint / 3D model

Parts

31
QtyValueFootprintReferences
4MountingHole_2.1mmMountingHole:MountingHole_2.1mm2.1mm, 2.1mm, 2.1mm, 2.1mm
2Q_NPN_BECPackage_TO_SOT_SMD:SOT-23EN_CTRL1, IO0_CTRL1
1Barrel_Jack_ConnectorUSBC:BarrelJackJ1
1C1Capacitor_THT:CP_Radial_D10.0mm_P5.00mm1000µF
1C2Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder100nF
1C3Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder100nF
1C4Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder100nF
1CIN1Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder22µF
1COUT1Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder47µF
1D1LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderLED
1D2Diode_SMD:D_SMASS34
1DTVSDiode_SMD:D_SMASMF5.0A
1ESP32-WROOM-32UUSBC:XCVR_ESP32-WROOM-32UU1
1ESP32_PROG_1x6Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ3
1LInductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolderL1
1LM2596S-ADJPackage_TO_SOT_SMD:TO-263-5_TabPin3U4
1MorsettoUSBC:Morsetto_3_VieJ2
1PolyfuseFuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder12A
1R0Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder470Ω
1R1Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder10k
1R2Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder10k
1R3Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder10K
1R4Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder10k
1R5Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder470Ω
1RbotResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder1.2k
1Rtop1Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder2.0k
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6_HandsolderingUSBLC6-2SC6

More from ZonatedCord/Yggdrasill

3
  • 2 layers39.1 × 68.9 mmBaseChipOnly, the printed circuit board in 3D

    BaseChipOnly

    ZonatedCord/Yggdrasill

    Smart LED plant pot — ESP32 PCB, WS2812B/SK6812 LEDs, WLED firmware, modular 3D-printed vase, and a native iOS app with Apple's Liquid Glass design.

    34 parts1
  • 2 layers9.2 × 108.6 mmFoglia Led, the printed circuit board in 3D

    Foglia Led

    ZonatedCord/Yggdrasill

    Smart LED plant pot — ESP32 PCB, WS2812B/SK6812 LEDs, WLED firmware, modular 3D-printed vase, and a native iOS app with Apple's Liquid Glass design.

    31 parts1
  • 2 layers50 × 73.6 mmESP32 LED v2, the printed circuit board in 3D

    ESP32 LED v2

    ZonatedCord/Yggdrasill

    Smart LED plant pot — ESP32 PCB, WS2812B/SK6812 LEDs, WLED firmware, modular 3D-printed vase, and a native iOS app with Apple's Liquid Glass design.

    15 parts1

Similar boards

  • 2 layers94 × 70 mmCore, the printed circuit board in 3D

    Core

    stanislavstarcha/powerbox

    Add paths to your bash/zsh rc for convenience

    77 parts
  • 2 layers200 × 101 mmAtmega32, the printed circuit board in 3D

    Atmega32

    talonghtn-rgb/MachATmega32

    Đây là dự án thiết kế và chế tạo bo mạch học tập lập trình nhúng sử dụng vi điều khiển ATmega32, được xây dựng nhằm phục vụ việc học tập, thực hành và nghiên cứu các hệ thống nhúng.

    168 parts
  • 2 layers60 × 150 mmPhone, the printed circuit board in 3D

    Phone

    TheEinfachFelix/CampPhone

    Warum habe ich mich dagegen entschieden, das Sim Modul selber zu implementieren? Ich habe kein Chip gefunden, der günstiger als das fertige Modul war, und ein Datenblatt in Englischer Sprache hat.

    137 parts
  • 2 layers82 × 99 mmZudo pd, the printed circuit board in 3D

    Zudo pd

    Takazudo/zudo-pd

    P15 r1 is the common 27 × 40 mm STUSB4500 15 V / 3 A module for LED first, then PD15. The same PCB, population and NVM image serve both. Source: board-p15-draft.kicadpcb and ../../scripts/schgen/boardp15spec.py.

    94 parts1
  • 2 layers171 × 83.9 mmPilot6Axis v2, the printed circuit board in 3D

    Pilot6Axis v2

    X-Lemon-X/Pilot_6_axis

    DIY Remote Controler Build

    126 parts2MIT
  • 2 layers71.2 × 38.1 mmESP32-Ethgate, the printed circuit board in 3D

    ESP32-Ethgate

    noeljp/esp32-mqtts-secure

    Projet ESP32 avec Mosquitto MQTTs, TLS, login/mdp

    120 parts

Questions

How big is the BaseChipOnly PCB?

It measures 39.1 × 68.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BaseChipOnly use?

31 parts, built around the ESP32-WROOM-32U, LM2596S-ADJ and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BaseChipOnly KiCad files?

From the ZonatedCord/Yggdrasill repository on GitHub, at the commit this page was made from: the board is PCB/BaseChipOnly/BaseChipOnly.kicad_pcb and its schematic PCB/BaseChipOnly/BaseChipOnly.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BaseChipOnly design in my own project?

Its repository states no licence, so its author keeps all rights: ask ZonatedCord before reusing the design.