
Aeroq Hardware v3
EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54

USB to UART/SPI/I2C/JTAB
Ft2232h is an open-source printed circuit board by Xarlan, from the Xarlan/ft2232h repository on GitHub, published under the MPL-2.0 licence. It is a 2-layer board of 63 × 40 mm with 40 parts on 53 nets, routed with 459 tracks and 49 vias.
It is built around the AMS1117, FT2232HL and 0.1UF 50V 5*11. Its parts include 19 capacitors, 8 resistors, 4 connectors, 3 ICs and 2 crystals.
USB to UART/SPI/I2C/JTAG
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 0.1uF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C5, C6, C7, C9, C10, C11, C13, C14, C15, C16, C17, C18, C19 |
| 4 | 4.7uF/10V | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C2, C3, C4, C8 |
| 3 | 10kOhm | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R5 |
| 2 | 10 Ohm | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8 |
| 2 | FerriteB | footprints:FerriteBead | FB1, FB2 |
| 2 | PBD-2x10 | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | J3, J4 |
| 2 | PBD-6 | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J1, J2 |
| 1 | 12MHz | footprints:CSTCE_G15C | Y1 |
| 1 | 12kOhm | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 1 | 1kOhm | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 2kOhm | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | 3.3uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C12 |
| 1 | AMS1117 | Package_TO_SOT_SMD:SOT-223 | U1 |
| 1 | FT2232H | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | F_Small | footprints:MF-MSMF050 | F1 |
| 1 | SW_PUSH_SMALL | footprints:IT-1185AP | Reset |
| 1 | eeprom_93C46 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | micro_USB | footprints:micro_USB_KLS1-233-0-0-1-T | X1 |

EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54

EnriqueNeyra/aether
All-in-one home air quality monitor measuring Temp, Humidity, CO2, VOCs, Particulate Matter, and NOx. Powered by ESP32-C3 running esphome, and built with Home Assistant integration


CuriousMotor/Onyx-Stepper-Motherboard
The successor of the iconic Arduino-CNC-shield


db-electronics/triple-bypass-kicad
An audio and video bypass circuit for the Sega Genesis


It measures 63 × 40 mm and has 2 copper layers, 1.6 mm thick.
40 parts, built around the AMS1117, FT2232HL and 0.1UF 50V 5*11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Xarlan/ft2232h repository on GitHub, at the commit this page was made from: the board is pcb/ft2232h.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).