

Alarma mates v1
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 63
- Pads
- 166
- Tracks, vias
- 245, 38
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 May 2025
- Updated
- 5 May 2025
Overview
Alarma mates v1 is an open-source printed circuit board by ValeRepe, from the ValeRepe/alarma-mates-pcb repository on GitHub. It is a 4-layer board with 39 parts on 63 nets, routed with 245 tracks and 38 vias.
It is built around the FT232RL, NE555D and FFB3904. Its parts include 21 resistors, 6 ICs, 5 capacitors, 3 switches and 2 connectors.
Main components
3FT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB ConvertersNE555D
SOIC-80℃~+70℃ 10mA 4.5V~16V SOIC-8 555 Timers / Counters ROHSTexas InstrumentsTimers / CountersFFB3904
SC-88(SC-70-6)-55℃~+150℃ 100 200mA 250MHz 300mW 40V NPN SC-88(SC-70-6) Bipolar (BJT) ROHSonsemiBipolar (BJT)
README
README.mdalarma-mates-pcb
Esquemático y diseño de PCB en KiCad de una alarma para tomar mates cada 5 minutos.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14 |
| 4 | R | Resistor_SMD:R_0603_1608Metric | R15, R16, R17, R19 |
| 3 | 10n | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4 |
| 3 | SW_SPST | Button:SW_TS02-66-90-BK-260-SCR-D | SW1, SW2, SW3 |
| 2 | 4040 | 74HC:SOT109-1_NXP | U2, U3 |
| 2 | NE555D | NE555:D8 | U1, U5 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 50k | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | Buzzer | BuzzBuzz:TO_0601A_SOB | BZ1 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | FFB3904 | Trans:SOT-23_MCC | Q1 |
| 1 | FT232RL | FT232:SSOP-28_FTD | U6 |
| 1 | LM741 | U741:D8 | U4 |
| 1 | UART | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical_SMD_Pin1Left | J2 |
| 1 | USB_B | USB:CUI_UJ2-MBH-1-SMT | J1 |
Similar boards
- 4 layers28.2 × 41.4 mm

- 4 layers

- 2 layers107 × 54 mm

- 2 layers140.7 × 47.4 mm

EG8010 A1
Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)
201 parts17MIT - 2 layers175 × 115 mm

Laser Controllerv2 only for pcb test
Andre1Becker/GalvOS
Open-source ESP32-S3 laser show controller — built to replace proprietary OEM controllers in RGB galvo laser projectors
122 parts11GPL-3.0 - 4 layers189.4 × 59.1 mm

- 2 layers95 × 60 mm

- 2 layers39 × 66.5 mm

Questions
What parts does the Alarma mates v1 use?
39 parts, built around the FT232RL, NE555D and FFB3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Alarma mates v1 KiCad files?
From the ValeRepe/alarma-mates-pcb repository on GitHub, at the commit this page was made from: the board is alarma_mates_v1.kicad_pcb and its schematic alarma_mates_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Alarma mates v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ValeRepe before reusing the design.