

Kicad proyecto
La mejor PCB
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 63
- Pads
- 180
- Tracks, vias
- 366, 89
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 May 2025
- Updated
- 12 May 2025
Overview
Kicad proyecto is an open-source printed circuit board by SebaBascou, from the SebaBascou/La-mejor-PCB repository on GitHub. It is a 4-layer board with 46 parts on 63 nets, routed with 366 tracks and 89 vias.
It is built around the FT232RL, NE555D and MMBT3904. Its parts include 19 resistors, 11 capacitors, 6 ICs, 3 switches and 2 connectors.
Main components
3FT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB ConvertersNE555D
SOIC-80℃~+70℃ 10mA 4.5V~16V SOIC-8 555 Timers / Counters ROHSTexas InstrumentsTimers / CountersMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100k | Resistor_SMD:R_0603_1608Metric | R4, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C3, C7, C8, C9, C10, C11 |
| 4 | 10n | Capacitor_SMD:C_0603_1608Metric | C2, C4, C5, C6 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R3, R18 |
| 3 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm_H9.5mm | SW1, SW2, SW3 |
| 2 | 4040 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5, U6 |
| 2 | NE555D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 8k2 | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | Buzzer | pretty:Buzzer | BZ1 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U3 |
| 1 | LM741 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | LOGO | pretty:diamondogs | G*** |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | RV1 | pretty:601030 | 50k1 |
| 1 | RV2 | pretty:601030 | 10k1 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | USB_B | Connector_USB:USB_Mini-B_Wuerth_65100516121_Horizontal | J1 |
Similar boards
- 4 layers28.2 × 41.4 mm

- 4 layers

- 4 layers119.5 × 75.3 mm

TimingMonitor
lwa-project/zcu102_timing_monitor
Board to power/monitor the clock distribution to ZCU102 boards
102 parts1 - 2 layers157.5 × 30.5 mm

Tube Driver
median-dispersion/GMT-Geiger-Counter
Geiger-Müller tube based Geiger counter.
45 partsGPL-3.0 - 2 layers55 × 49 mm

- 2 layers100 × 50 mm

- 2 layers83.5 × 97.5 mm

TeleprinterHat
MattisLind/teleprinterHat
A RaspberryPi HAT that interfaces a old school teleprinter
145 parts6 - 2 layers80 × 100 mm

Arduino v2.0
arlethmichellopez/Curso-de-KiCad
En esta sección integraré el diseño de las PCB's que cree durante el transcurso de mi curso en KiCad
101 parts2
Questions
What parts does the Kicad proyecto use?
46 parts, built around the FT232RL, NE555D and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kicad proyecto KiCad files?
From the SebaBascou/La-mejor-PCB repository on GitHub, at the commit this page was made from: the board is kicad proyecto.kicad_pcb and its schematic kicad proyecto.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kicad proyecto design in my own project?
Its repository states no licence, so its author keeps all rights: ask SebaBascou before reusing the design.