Skip to the content

Boards by Vakon84

10 boards

Open-source boards designed in KiCad by Vakon84 on GitHub, from 9 repositories. A board’s address here is its repository’s there.

  • 2 layers99.6 × 99.6 mmKarabas nano revJ, the printed circuit board in 3D

    Karabas nano revJ

    Vakon84/karabas-nano

    ZX Spectrum compatible machine with real Z80 CPU and all logic inside the CPLD Altera EPM3256ATC144 (or EPM7512).

    162 parts1WTFPL
  • 4 layers156.2 × 130.9 mmPC104-ISA Card, the printed circuit board in 3D

    PC104-ISA Card

    Vakon84/PC104-ISA-Card

    Adapter for connecting a PC104 computer to a 16-bit ISA backplane. Power can be supplied from the backplane or from the PC104 module itself. DMA and IRQs are supported.

    12 parts1CERN-OHL-S-2.0
  • 4 layers80 × 47 mmATnoX smd, the printed circuit board in 3D

    ATnoX smd

    Vakon84/ATnoX

    The ATnoX was born out of the necessity for me to have a small adapter adapter I could use to fit AT/XT motherboards into modern cases, powering them with ATX power supplies and turning them on with a momentary switch…

    41 partsCC-BY-SA-4.0
  • 2 layers103.8 × 73.2 mmRTL8019, the printed circuit board in 3D

    RTL8019

    Vakon84/Chanterelle-RTL8019AS

    58 parts
  • 2 layers98.4 × 73.9 mmXT Prototype Board, the printed circuit board in 3D

    XT Prototype Board

    Vakon84/isa-ram-expansion

    This is my simple 8-bit ISA RAM expansion board. I created it to allow me to add UMB memory to a regular XT. It can also bring a 512k or 256k XT up to a full 640k.

    22 parts
  • 2 layers104.1 × 74.9 mmISA8 Ethernet, the printed circuit board in 3D

    ISA8 Ethernet

    Vakon84/isa8_eth

    If EEPROM has not been programmed prior to assembly, now it is a good time to do so. The U3 EEPROM contains the following configuration for the RTL8019AS chip: MAC address ISA resources for jumperless configuration Base…

    34 partsCERN-OHL-S-2.0
  • 2 layers85.1 × 67.3 mmLts74x, the printed circuit board in 3D

    Lts74x

    Vakon84/lts74x

    Lts74x was inspired by the following propjects: Integrated circuit tester: https://github.com/Johnlon/integrated-circuit-tester Smart IC Tester: https://github.com/akshaybaweja/Smart-IC-Tester

    75 partsMIT
  • 2 layers98.5 × 79.5 mmSnes feram, the printed circuit board in 3D

    Snes feram

    Vakon84/SNES-FeRAM-Cart

    This project was possible thanks to poorstudenthobbyist (Very nice and informative guides) and whicker (Showed the basics of how to wire a FeRAM to SNES), as well as other members of NESdev forums.

    35 parts
  • 2 layers214 × 91 mmZX-81Keyboard v1.1, the printed circuit board in 3D

    ZX-81Keyboard v1.1

    Vakon84/zx81-mechboard

    This keyboard is designed to use Cherry MX or Gateron switches. The keyboard is open source, please feel free to modiy it but always link back to this repository.

    54 partsGPL-3.0
  • 2 layers99.6 × 99.6 mmKarabas nano revF, the printed circuit board in 3D

    Karabas nano revF

    Vakon84/karabas-nano

    ZX Spectrum compatible machine with real Z80 CPU and all logic inside the CPLD Altera EPM3256ATC144 (or EPM7512).

    155 parts1WTFPL