

Micromouse
- Size
- 90 × 121.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 96
- Pads
- 300
- Tracks, vias
- 500, 115
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 21 Oct 2023
- Updated
- 13 May 2025
Overview
Micromouse is an open-source printed circuit board by UBIEEE, from the UBIEEE/micromouse_pcb_team_2023 repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 121.7 mm with 70 parts on 96 nets, routed with 500 tracks and 115 vias.
It is built around the RP2040, W25Q128JVSIQ and ICM-20602, with the NCV1117DT33T5G, SFH 4550 and TEFT4300 among its other parts. Its parts include 23 capacitors, 13 resistors, 9 diodes, 7 ICs and 3 switches. It belongs with the RP2040 boards of this library.
Main components
8RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHICM-20602
LGA-16(3x3)-40℃~+85℃ 1.71V~3.45V 16bit 1KB 6uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测 LGA-16(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersNCV1117DT33T5G
TO-252-2(DPAK)-40℃~+125℃@(Ta) 0.003%Vout 1 1.15V@(800mA) 1A 20V 3.3V 62dB@(120Hz) 6mA Fixed Over Current Protection、Over Temperature Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSFH 4550
插件,D=5.7mm-40℃~+100℃ 1.5V 1100mW/sr@IF=100mA 860nm 插件,D=5.7mm Infrared LED Emitters ROHSOSRAM Opto SemiconInfrared LED EmittersTEFT4300
插件,D=3mm-40℃~+100℃ 0.3V@0.1mA 100mW 1nA 50mA 70V 925nm NPN ±30° 插件,D=3mm Phototransistors ROHSVishay IntertechnologyPhototransistors10118194-0001LF
SMD-30℃~+80℃ 1 100V 5P Black Female Micro-B USB 2.0 SMD USB Connectors ROHSAmphenolUSB ConnectorsABLS-12.000MHZ-B4-T
HC-49S-SMD-20℃~+70℃ 12MHz 18pF 50Ω ±30ppm ±50ppm HC-49S-SMD Crystals ROHSAbraconCrystals
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | micromouse_components:CAP_GRM155_MUR | C3, C4, C5, C6, C7, C8, C9, C12, C13, C14, C19, C20, C21 |
| 7 | 1k | micromouse_components:RES_RC0402_YAG | R3, R4, R9, R10, R11, R12, R13 |
| 5 | LED | micromouse_components:LED_LTST-C191_LTO | D5, D6, D7, D8, D9 |
| 4 | 10k | micromouse_components:RES_RC0402_YAG | R5, R6, R7, R8 |
| 4 | 1u | micromouse_components:CAP_GRM155_MUR | C10, C11, C22, C23 |
| 4 | SFH4550 | micromouse_components:SFH4550 | D1, D2, D3, D4 |
| 4 | TEFT4300 | micromouse_components:TEFT4300 | CR1, CR2, CR3, CR4 |
| 3 | 1825910-6 | micromouse_components:SW4_1825910-B_TEC | SW1, SW2, SW3 |
| 2 | 10u | micromouse_components:CAP_GRM21_MUR | C1, C2 |
| 2 | 27.4 | micromouse_components:RES_RC0402_YAG | R1, R2 |
| 2 | 27p | micromouse_components:CAP_GCM155_MUR | C15, C16 |
| 2 | 47u | micromouse_components:IND_BOURNS_SRR4028 | L1, L2 |
| 2 | MA730 | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm | U6, U7 |
| 2 | Motor_DC | micromouse_components:CONN_B2B-ZRLFSN_JST | M1, M2 |
| 1 | 10118194-0001LF | micromouse_components:CONN_10118194-0001LF_AMP | USB1 |
| 1 | 10n | micromouse_components:CAP_GRM1885_1P6XP8_MUR | C17 |
| 1 | 2.2u | micromouse_components:CAP_GRM155_MUR | C18 |
| 1 | ???? | micromouse_components:CONN_B2B-ZRLFSN_JST | BT1 |
| 1 | ABLS-12.000MHZ-B4-T | micromouse_components:XTAL_ABLS_ABR | XTAL1 |
| 1 | DRV8835DSSR | micromouse_components:DSS0012A | U5 |
| 1 | ENC_A | micromouse_components:ENC_1_A | E1 |
| 1 | ENC_A | micromouse_components:ENC_2_A | E2 |
| 1 | ENC_B | micromouse_components:ENC_2_B | E4 |
| 1 | ENC_B | micromouse_components:ENC_1_B | E3 |
| 1 | ICM-20602 | Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U4 |
| 1 | NCV1117DT33T5G | micromouse_components:DPAK-3_ONS | U2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
Similar boards
- 4 layers203.8 × 115.3 mm

- 4 layers50 × 75.2 mm

RpiFly v3
r3dpath/RpiFly_Hardware
While most of the functionality here has been tested to work theres certainally some marginal design decisions, just beware.
108 parts1 - 4 layers82.6 × 82.5 mm

- 4 layers102.9 × 96.7 mm

PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 2 layers99.1 × 72.9 mm

- 2 layers475 × 139.9 mm

Skogaslider main pcb
skogaby/skogaslider
Firmware, CAD, and PCB files for the skogaslider, an RP2040-based controller to simulate Chunithm's gameplay experience
175 parts18MIT - 2 layers30.1 × 65.1 mm

RPi 0 RP2040
Hugoyhu/Pico2040ZeroW
Raspberry Pi Form Factor, RP2040, Wireless support with ESP-01
46 parts7Apache-2.0 - 2 layers210.1 × 98.3 mm

Granola trailmix
michaelswitzer/granola-trailmix
The TrailMix is a low-cost professional grade button box style arcade controller.
48 parts6MIT
Questions
How big is the Micromouse PCB?
It measures 90 × 121.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Micromouse use?
70 parts, built around the RP2040, W25Q128JVSIQ, ICM-20602 and NCV1117DT33T5G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Micromouse KiCad files?
From the UBIEEE/micromouse_pcb_team_2023 repository on GitHub, at the commit this page was made from: the board is hardware/pcb/micromouse.kicad_pcb and its schematic hardware/pcb/micromouse.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Micromouse design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).